Uh, Guys? (And Girls) - Easy GT-Four Registration Stateside, Why didn't we see this before? |
Uh, Guys? (And Girls) - Easy GT-Four Registration Stateside, Why didn't we see this before? |
Jul 11, 2010 - 11:00 PM |
|
Enthusiast Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) |
stupid question, why wont the gov. let gt-four's in without getting the panties in a bundle?
-------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
Jul 12, 2010 - 9:40 AM |
|
Enthusiast Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) |
Because they haven't been built to conform to US DOT laws.
IE: Headlight alignment. Just ask anyone who has bought JDM projectors. They should be adjusted for LHD use as to not blind oncoming drivers. -------------------- ~bloodMoney
|
Jul 12, 2010 - 10:41 AM |
|
Enthusiast Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) |
oo ok, sounds like a bunch of crap if you ask me
-------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
Jul 13, 2010 - 5:26 AM |
|
Enthusiast Joined Sep 29, '09 From Prince George, BC CANADA EH! Currently Offline Reputation: 8 (100%) |
stupid question, why wont the gov. let gt-four's in without getting the panties in a bundle? From what I've heard is in order for any car to be registered in the US the chassis (or a North American equivalent chassis) has to have gone through certain crash/safety testing in North America. At the time, Toyota didn't have a comparable base chassis stateside for the DOT to have already passed...and they certainly aren't going to go through the money and trouble now 15 years later. All other RHD cars that have been legally imported have an equivalent North American counterpart chassis that has been tested (so I've been told) -------------------- ST205 Crew represent
Challenge Accepted |
Jul 13, 2010 - 8:06 AM |
|
Enthusiast Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) |
hmm i hate it, i would love to have a gt-four sitting in my drive right now.
-------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
Jul 13, 2010 - 11:27 AM |
|
Enthusiast Joined Nov 10, '09 From Louisiana Currently Offline Reputation: 5 (100%) |
I read a HUGE write up on a company in California that were importing R33's legally. Then they got busted for importing R34s and registering them as R33s and R32s. I think because of them thats one of the main reason cars are hard to import legally. I know there are still long ways around it like buying from Canada and all that. Or doing the kit car and saying you made it yourself as a replica, but that will still take forever to do. And i think in my own opinion that by the time you imported one legit and paid customs and all that to get it registered you could have just converted the GT to AWD and just slapped on the GT4 front end and a nice paintjob. Wouldnt be quite the same but it would still look and preform about the same.
|
Jul 24, 2010 - 12:35 PM |
|
Enthusiast Joined Jun 17, '10 From Frankfort Kentucky Currently Offline Reputation: 0 (0%) |
Me and my wife bought our old 5th gen Celica from a dealer who bought it at auction in Canada. On the Carfax it showed up as being totaled in Canada. there wasn't a single scratch on the car though, I looked everywhere.
-------------------- |
Jul 25, 2010 - 10:21 PM |
|
Enthusiast Joined Aug 19, '08 From New Brunswick Currently Offline Reputation: 3 (100%) |
your guys best bet is for someone to create and sell a kit with templates and everything needed to make ur self a gt4, then buy a front clip ur awd parts and astank and trunk floor and go to town. ther was a build on here a guy was in the middle of doing this building cross members and he quit. he was on to something...be a good cash cow for someone for sure if they took the time and money to do it, then for about the right price you could have your gt4. or suck it up and move to canada, it aint bad we have sweet bacon, maple syrup, great tasting beer and all the jdm cars you can shake a stick at
-------------------- i hate snow, missing my celica |
Jul 25, 2010 - 10:40 PM |
|
Enthusiast Joined Aug 11, '09 From Buffalo, NY Currently Offline Reputation: 15 (100%) |
your guys best bet is for someone to create and sell a kit with templates and everything needed to make ur self a gt4, then buy a front clip ur awd parts and astank and trunk floor and go to town. ther was a build on here a guy was in the middle of doing this building cross members and he quit. he was on to something...be a good cash cow for someone for sure if they took the time and money to do it, then for about the right price you could have your gt4. or suck it up and move to canada, it aint bad we have sweet bacon, maple syrup, great tasting beer and all the jdm cars you can shake a stick at You can already modify your car to look like a gt-four with genuine parts - the awd engine swap is the hard part, and costly part if you don't do it yourself. Or, there's jmeyer's method. -------------------- |
Jul 26, 2010 - 9:52 AM |
|
Enthusiast Joined Nov 8, '08 From Penn Valley,Ca Currently Offline Reputation: 1 (100%) |
your guys best bet is for someone to create and sell a kit with templates and everything needed to make ur self a gt4, then buy a front clip ur awd parts and astank and trunk floor and go to town. ther was a build on here a guy was in the middle of doing this building cross members and he quit. he was on to something...be a good cash cow for someone for sure if they took the time and money to do it, then for about the right price you could have your gt4. or suck it up and move to canada, it aint bad we have sweet bacon, maple syrup, great tasting beer and all the jdm cars you can shake a stick at The beer and the cars are enough to convince me! Isn't the drinking age 18? -------------------- |
Jul 26, 2010 - 5:23 PM |
|
Enthusiast Joined Aug 19, '08 From New Brunswick Currently Offline Reputation: 3 (100%) |
? i know u can modify your car to look like one? im taking about if someone came up with a kit with templates of what to cut and to mark out were to weld ect ect along with a detailed step by step and a parts list and you would be set.
and yes legal age is 18 or 19 depending on location, we start early -------------------- i hate snow, missing my celica |
Jul 26, 2010 - 5:29 PM |
|
Enthusiast Joined Apr 28, '09 From York pa Currently Offline Reputation: 3 (100%) |
? i know u can modify your car to look like one? im taking about if someone came up with a kit with templates of what to cut and to mark out were to weld ect ect along with a detailed step by step and a parts list and you would be set. and yes legal age is 18 or 19 depending on location, we start early pss early try Ecuador ur legal as soon as u can walk to the store and buy it now back on topic this is what is happening to some skylines that were brought as kit cars http://jalopnik.com/5371967/feds-seize-ill...e-gt+rs-in-cali being impounded and sold export only |
Jul 26, 2010 - 9:24 PM |
|
Enthusiast Joined May 29, '09 From Lake Ariel, PA Currently Offline Reputation: 4 (100%) |
I contacted a company that goes through importing cars and this is what the head of their department sent me.
Mr. Guiffredo Unfortunately, with regards to this vehicle, the US Department of Transportation has a firm position on the requirements for importing RHD vehicles. Per DOT, "The DOT has determined that there are differences between right hand drive (RHD) vehicles and left hand drive (LHD) vehicles. The fact that most manufacturers do not manufacture right hand drive vehicles for the U.S. market means that the manufacturer has not performed U.S. Department of Transportation (DOT) Federal Motor Vehicle Safety Standard (FMVSS) certification testing for a RHD vehicle. We recommend that any individual interested in importing a RHD vehicle into the U.S., request information from the U.S. manufacturer's representative that specifically identifies that the RHD version of the non-U.S. vehicle would meet the same Federal Motor Vehicle Safety Standards as the LHD version of the vehicle." This letter must be on Manufacturer letterhead and refer to your vehicle directly by VIN number. However, it is highly unlikely that the manufacturer will be willing to provide such a letter if they have not made a vehicle of this model for sale here in the states. Without this documentation, we will be unable to do the conversion work on your vehicle without crash testing. US DOT will require that at least one additional identical vehicle be imported for the purposes of crash testing. There is no guarantee that the crash test data will meet the standards of DOT. Sorry I do not have more positive information. Thank you, Gina Benitez Wallace Environmental Testing Laboratories, Inc. 2140 Wirtcrest Houston, TX 77055 Phone: 713-956-7705 Fax: 713-956-0104 so basically if you want to import a rhd celica, you would also have to import a second one for crash testing which you would also have to pay for. It's a pretty penny, and it would have to pass the crash test in order to get one here. It's an extremely pricey process. Your best bet would do an awd conversion and 3s swap. -------------------- Representing the Convertible Crew since 2008 |
Jul 26, 2010 - 10:51 PM |
|
Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
yep, it's all been said and done. just not worth it. unless youre loaded.
-------------------- *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
Lo-Fi Version | Time is now: November 30th, 2024 - 2:49 AM |