ST205 Powered COUPE!!! Options

[Ted95]

Link to project thread.. 7/9/13

http://www.6gc.net/forums/index.php?showtopic=89550


Hey guys for those of you who dont kno me, my names Cameron. As some of you may kno this past march i was deciding on whether to buy and do a Beams swap or a 3rd GEN 3sgte swap. well when buying a set of sideskirts off of Dustin and Stef, i got the privelage of driving both there Beams swap and Dustins 3rd Gen swap. the Beams a very fun car and altho i honestly wasnt used to the power the 3rd gen put out, it was clear to me for the same money i could have a fast and fun 3rd gen.

Sooo... i talked to my friend Manny and asked who to go to for a 3rd gen set and he sent me to Jim and went from there. i actually recieved my motor the same day as Manny did, (since we live 20min from each other, his swap just went a lil faster then mines to complete since ive been going paycheck to paycheck since ive bought the motor to finish everything lol)

so this is what i got from jim and my progress since getting it. (Alot of the pics were just refrence pics for myself as i was going along so sorry of some of the pics r kinda stupid lol)

when it came off the truck..



i didnt buy the set with the TMIC so this is what i really got after Jim took the TM off lol


these are all cellphone pics so srry if quality isnt the best at times














last time the timing belt was done lol reads February 28, 2002 according to vince. and its like roughly 37k miles



then i started to take things apart to clean the motor up a bit and start refreshing it.. i missed out on some pics here and there but here is what i got

took the manifold off and took a page out of Mannys build and shaved the manifold a bit.. didnt take pics while i was doing it tho

after i sanded and clean the manifold b4 paint



Throttle body b4 cleaned and painted




manifold b4 clear coated.. forgot to take a pic when it was finished..




Preparing valve cover



after clear coat






then disaster... as i was taking the AWD tranny off i cracked my upper oil pan just under the clutch dust cover.. (this is my first swap... and ya, i made a mistake lol)






thats next on my list of things to do lol .. its not that bad of a fix tho honestly, it can b fixed with the pan on the motor which is what i will b doing.

new berk 3in fully loaded DP







and as she sits now



also some other part info..

Mannys old FMIC from his 5FSTE which i will be using for my FM set up
pics upside down lol


resurfaced flywheel



and as for the rest, my water pump should come in tomorrow so i can do my T-belt and pump, IC piping is on its way (2.5in) .. i also have a 3in electric cut out i will be using, a HKS SSQV black BOV, Devils own WI, and a prosport premium boost gauage..

last thing on the list is Tweaks stage 4 6 puck sprung comp clutch (keeping my s54 tranny). and 3" piping for my b-pipe.

the swap should happen towards the end of this month, hopefully in a few weeks or so.

comments and questions if any

This post has been edited by Ted95: Jul 9, 2013 - 1:38 PM

[SupraKid]

Wow...that looks incredible!!! Cant wait for this thread to continue!

[richee3]

Nice, Cameron! I've been waiting for this thread. I'll be watching very closely. Great progress so far!

[presure2]

lookin good cam!

[Johnnyny]

all right dude repping for coupes lol love the valve cover

[Ted95]

thanks guys! its been alot of fun so far and im soooo close. its been a real learning experience since this is my first time doing a motor swap and doin ghtis kind of stuff and its coming along very well so far. oh ya, and mannnnnnnyyyyyyy questions and research lol. im verrrry close in getting this done, a few more paychecks and there will be another EAST COAST 3SGTE SWAP!!!!

[Defgeph]

looks really clean, keep it up

[OOBE]

That is mint, man! Awesome job!

[Ted95]

Water pump and new PS belt came in today, (Thanks Art!) im going to try and change the pump and belts this weekend and work on that dreadful crack lol .. updates by beginning of next week.

[mak5603]

Looks nice, I will be watching this thread as my car is in the same boat as yours right now. We have gathered many similair parts, I look forward to seeing how it works out.

[Ted95]

Looks nice, I will be watching this thread as my car is in the same boat as yours right now. We have gathered many similair parts, I look forward to seeing how it works out.

thanks man, its a slow process but its getting there. ive been takin this project paycheck to paycheck since i bought the motor back in march. if it wasnt for bills and other **** this thing would b done already lol. but a few more weeks and she will be ready to gooo!

[easternpiro1]

NICE!!!

[Ted95]

not much of an update but this is where the project stands as of now. got my new wires and switch for the cut-out (since i bought it off a friend who lost the wires) recieved my 3in piping for my b-pipe from jegs, still awaiting my IC piping that i ordered like 2 weeks ago, fixed that ugly crack, (pics later) and next i still need to buy the clutch from tweak.

[SleekCelica]

Coupes, FTW

[Stambo]

My st185 powered coupe pulls hard, i'm sure yours will pull even harder with a st205!

[Ted95]

My st185 powered coupe pulls hard, i'm sure yours will pull even harder with a st205!

ya man i cant wait! it should be a fun ride

[mgnt232]

ANOTHER east coast 3s! Im so lucky to live where i do hahaa have had the privilege to see like 6 3s swaps in person
Great progress, hopefully next summer i can start my swap
So ill sure be asking you some questions seeing as it will be my first swap as well

[luka]

interested in selling the factory intake hardware if your not gonna use it?

[Ted95]

ANOTHER east coast 3s! Im so lucky to live where i do hahaa have had the privilege to see like 6 3s swaps in person
Great progress, hopefully next summer i can start my swap
So ill sure be asking you some questions seeing as it will be my first swap as well

ya man def! the east coast is where its at for these bad boys haha, hope to see ur thread as well and the car at the next CSP meet next yr!

interested in selling the factory intake hardware if your not gonna use it?

as of right now, i will probably be using the factory intake for a verrryy short while until i get a proper intake, but ill keep u in mind if ur looking for one.

[presure2]

i can make you a nice intake cameron, PM me.