 Both low beam went out |
  |
 Nov 16, 2010 - 4:54 PM
|
 
|
|
Enthusiast  Joined Apr 22, '08 Currently Offline Reputation: 2 (100%)  |
Both of my low beam went out , i was thinking its the fuse because theres no way both will go bad at the same time . Fuses are all good . any idea what might be the problem?
This post has been edited by rheyx: Nov 16, 2010 - 4:55 PM |
|
Nov 16, 2010 - 5:30 PM
|
|
 Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
Maybe a wire or something got loose?
-------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Nov 16, 2010 - 5:47 PM
|
|
 Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
it wouldn't be the fuse, try replacing the relay in the engine bay
|
|
Nov 16, 2010 - 7:54 PM
|
|
|
Enthusiast Joined Apr 22, '08 Currently Offline Reputation: 2 (100%) |
QUOTE (mkernz22 @ Nov 16, 2010 - 6:47 PM)  it wouldn't be the fuse, try replacing the relay in the engine bay i tried pulling out the relay and both high and low went out , is it possible that only the low beam part is bad? if relay will go bad both high and low should go bad right? theres only one relay for the high and low right? This post has been edited by rheyx: Nov 16, 2010 - 7:56 PM |
|
Nov 16, 2010 - 7:57 PM
|
|
|
Enthusiast Joined Apr 22, '08 Currently Offline Reputation: 2 (100%) |
QUOTE (HectortheRican @ Nov 16, 2010 - 6:30 PM) Maybe a wire or something got loose? I check the wire and they are all good 
|
|
Nov 16, 2010 - 9:23 PM
|
|
|
Enthusiast Joined Jun 9, '09 From Saint Louis Currently Offline Reputation: 0 (0%) |
Here's the trouble shooting guide from the Toyota Factory Manual, but mine only covers US & Canada. The codes to the right of the trouble shoot guide show a detailed breakdown of the system if you need further detail. It sounds like the control switch from your description.
 
|
|
Nov 16, 2010 - 9:49 PM
|
|
|
Enthusiast Joined Apr 22, '08 Currently Offline Reputation: 2 (100%) |
QUOTE (pyeatts @ Nov 16, 2010 - 10:23 PM) Here's the trouble shooting guide from the Toyota Factory Manual, but mine only covers US & Canada. The codes to the right of the trouble shoot guide show a detailed breakdown of the system if you need further detail. It sounds like the control switch from your description. wow very useful, ill check on that. |
|
Nov 17, 2010 - 8:22 AM
|
|
|
Enthusiast Joined Mar 28, '10 From Columbia, South Carolina Currently Offline Reputation: 1 (100%) |
Check the bulbs. Don't overlook something that simple before you go prodding around with circuits
--------------------  1994 Celica GT, coupe, 5 speed. Front strut brace, cherrybomb glasspack, intake. |
|
Nov 17, 2010 - 1:26 PM
|
|
|
Enthusiast Joined Apr 22, '08 Currently Offline Reputation: 2 (100%) |
QUOTE (SleekCelica @ Nov 17, 2010 - 8:22 AM) Check the bulbs. Don't overlook something that simple before you go prodding around with circuits Yes sir i did .. but its impossible to have 2 bulbs goin bad at the same time. |
|
Nov 17, 2010 - 7:01 PM
|
|
 Enthusiast Joined Jan 17, '08 From JB MDL, NJ Currently Offline Reputation: 30 (100%) |
Lets not say impossible, rare yeah. But usually two lights going at once, start with their most common point and go backwards.
|
|
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 9th, 2025 - 5:29 PM |