Tigawoods' 1995 Celica, Racing n Stuff Options

[Stambo]

tiga you sign up for autox this year?

My 3s should perform great once i get my mfactory lsd in it

I'll make a write up and tell you how it does.

[Tigawoods]

i plan on it! just need to get my engine running right.
im curious to see how you do!

last night i tried to lower the rear but the bracket for the endlink would NOT move. many plumbing wrenches hammers mallets pipes pb blaster wd40 later...it didnt move a bit. i was able to configure a few things and lower it about a 1/4inch but i really needed atleast 1inch
pist

Good call.


My GT came with non-hubcentric wheels. So i'm looking for about 8 of a hubcentric that fit. All neons have 5x100 the same bolt pattern, there's a million of them, they have some ok looking wheels.

if i end up selling my steelies ill let you know first

[mkernz22]

is there an autox in every state?
i'm kind of interested to get into it a little bit

[4-eyed-freek]

are you going to make it this year. it will be nice to see someone else with a 6gc lol.

tiga you sign up for autox this year?

My 3s should perform great once i get my mfactory lsd in it

I'll make a write up and tell you how it does.

[Tigawoods]

every state there should be an club. google your state and then auto-x or scca after it. or i think you can look up thre regions on scca.com

[96stgreendemon]

Mike Try using some heat to get it loose, thats what i had to do with my axle nut, broke 3 breaker bars trying to get it off, hit it with a mappgas/oxgyen mix and it came right off

[Mycurse180]

Are you down by pittsburgh?

[Stambo]

are you going to make it this year. it will be nice to see someone else with a 6gc lol.

tiga you sign up for autox this year?

My 3s should perform great once i get my mfactory lsd in it

I'll make a write up and tell you how it does.

Yes now that my swap is finally done and run goods I should be out there every event

[Tigawoods]

Mike Try using some heat to get it loose, thats what i had to do with my axle nut, broke 3 breaker bars trying to get it off, hit it with a mappgas/oxgyen mix and it came right off

too late now i got mad and just left it how it was. put it all together

Are you down by pittsburgh?

40min south of pittsburgh for school and 40min west of Philly for home

[Tigawoods]

not really much to update on.
the car still isnt running as well as it should be be. a few more things to do to get all the bugs out.

redoing the entire exhaust setup.

and a surprise in a month or two

[HectortheRican]

I just noticed that I have not commented on your thread! Great build! And I hope it's running better soon

[808celica]

I like surprises......

[Tigawoods]

trying to stay away from the forums in fear of buying more stuff for the car for a small period lol
need some new photo gear that ive been trying to get for a long while but car stuff for some reason always ended up coming first

heres the plan.

remedy the engine problem over winter

come early spring, present for the car.

[whatthe]

What kind of photogear? I love photogear!

[808celica]

I love photo gear too, but the car comes first, and before the car my Tummy!!!!!

[Tigawoods]

haha food and beer have been coming first the past few weeks
just getting some new lenses reflectors and other odds and ends ive been needing.
plus the car stuff would just get ruined in the snowy weather

[808celica]

true true, winter just ended for us so the 18's are back on and my winter tires will be sleeping again

btw the Euro lip is waiting.......

[Tigawoods]

GAH! new forum!

[Mycurse180]

GAH! new forum!

What are you thinking about this problem we have?
Keep me updated.

[Tigawoods]

havent looked into it much due to the weather but spring break is coming up soon and i think im going to check the fuel pump and filter