 Alarm/keyless entry wiring kits |
  |
 Jan 15, 2011 - 11:45 PM
|
 
|
|
Enthusiast  Joined Sep 19, '08 From Michigan Currently Offline Reputation: 4 (75%)  |
Does anyone know of a kit that lets you install an aftermarket alarm or keyless entry without cutting into the car wiring? Something like the kits for trailer hitches where you unplug the factory connectors and insert wiring with matching connectors.
|
|
Jan 16, 2011 - 1:02 AM
|
|
 Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
you can do that with any alarm system. there's just certain connectors that bridge the wiring.
actually come to think of it, you will probably have to splice some wires in. |
|
Jan 16, 2011 - 1:12 AM
|
|
|
Enthusiast Joined Sep 19, '08 From Michigan Currently Offline Reputation: 4 (75%) |
QUOTE (mkernz22 @ Jan 16, 2011 - 2:02 AM)  you can do that with any alarm system. there's just certain connectors that bridge the wiring. Not sure what that means. Can you elaborate? Do you have a source for the bridge connectors/wiring? |
|
Jan 18, 2011 - 1:02 AM
|
|
 Enthusiast Joined Jul 3, '09 From UT Currently Offline Reputation: 14 (100%) |
You can use t-taps, but they tend to fall off after a while if you buy the cheap ones. Youll have to tap into nearly every wire you need. The steering column and driver's kick panel are the best places to source from. Just buy some inline strippers and solder your connections. If you want to do an alarm, you need to dig into your wiring. There isnt a patch harness made for that purpose.
|
|
Jan 18, 2011 - 1:06 AM
|
|
|
Enthusiast Joined Jan 18, '11 From Tucson, AZ Currently Offline Reputation: 0 (0%) |
|
|
Jan 18, 2011 - 1:49 AM
|
|
|
Enthusiast Joined Jul 3, '09 From UT Currently Offline Reputation: 14 (100%) |
QUOTE (pick-up_man @ Jan 17, 2011 - 11:06 PM) Never heard of that site. Excellent find. |
|
Jan 18, 2011 - 2:09 PM
|
|
|
Enthusiast Joined Sep 19, '08 From Michigan Currently Offline Reputation: 4 (75%) |
I've decided I don't really need an alarm so I'm going to do a keyless entry only.
I don't want to cut into the existing wiring as much as possible. I was hoping somebody makes a patch harness. If they don't, I will have to get a spare underdash harness and make my own. I'd rather buy one than make one. |
|
Jan 18, 2011 - 2:16 PM
|
|
|
Enthusiast Joined Jul 3, '09 From UT Currently Offline Reputation: 14 (100%) |
Ive installed a lot of alarms. Never seen one.
|
|
Jan 18, 2011 - 4:56 PM
|
|
|
Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
QUOTE (dgbldr @ Jan 18, 2011 - 2:09 PM) I've decided I don't really need an alarm so I'm going to do a keyless entry only. I don't want to cut into the existing wiring as much as possible. I was hoping somebody makes a patch harness. If they don't, I will have to get a spare underdash harness and make my own. I'd rather buy one than make one. you have to cut into the wiring to make it work! there's no adapters or plugs or anything like that. you have to cut your wires. period. get a shop to install it and do it right so you don't mess something up on it. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 2nd, 2024 - 3:55 AM |