WTB: 2 front JDM fenders (and side markers), Whatever color. No rust nor dent. Near Montreal. Options

[dudeofchaos]

I'm looking for 2 front JDM fenders and the side markers. I don't care about the color, I just want absolute no rust nor dent on them.
I'm near Montreal, I can come and pick em up if you're not too far. Otherwise I'll pay the shipping cost but I'd rather pick them up myself cause fenders are fragile.

This post has been edited by dudeofchaos: Feb 3, 2011 - 9:48 AM

[dudeofchaos]

Up!

[dudeofchaos]

Bump

[dudeofchaos]

bump

[BonzaiCelica]

good luck with this. I've been tryinng to look for a left side jdm fender and I've had no luck in the past 3 weeks. There are a ton of right side jdm fenders on nengun auctions! about 10 of them but no left ones

[dudeofchaos]

good luck with this. I've been tryinng to look for a left side jdm fender and I've had no luck in the past 3 weeks. There are a ton of right side jdm fenders on nengun auctions! about 10 of them but no left ones

Yeah, I dunno why. It's not the first time that I try finding one of those.. Never found one yet.

[joehernandez]

i have just the jdm side markers, i didnt installed them on my car, however its just the markers no the whole wires and stuff

[dudeofchaos]

i have just the jdm side markers, i didnt installed them on my car, however its just the markers no the whole wires and stuff

Well Im not gonna buy only the markers if I dont have the fenders but if I find fenders I will PM you. Are they amber or clean?

[mkernz22]

why don't you just find the measurements for the jdm side markers and patch up the usdm spot?
it's your best bet if you can't find them

[BonzaiCelica]

I can get the measurements for you if you'd like. I'm about to convert my left side usdm fender to jdm fender within the next week or so. So I'll take some pics if you would like me to just let me know

[dudeofchaos]

Because my right side fender has been bumped in. So instead of changing it for a usdm fender I want to change both fenders for Jdm's.
I woudn't do it anyways if I could cause I can't do it myself and I wouldn't want to pay someone to do it.

This post has been edited by dudeofchaos: Feb 8, 2011 - 9:52 PM

[mkernz22]

how bad is it pushed in? why not just hit it out if it's not bad, put some bondo or whatever on it, sand it prime it and paint it?

[BonzaiCelica]

Because my right side fender has been bumped in. So instead of changing it for a usdm fender I want to change both fenders for Jdm's.
I woudn't do it anyways if I could cause I can't do it myself and I wouldn't want to pay someone to do it.

if its only the right side buy a jdm right fender from here!! although Im not sure if you can buy from nengun auctions since you aren't located in japan. go ahead and send the website an email to see if you can do so.

http://www.nengun.com/search/#t:u:y;v:71662;c:57;g:1

you should be able to find all 10 or so right fenders. let me know if you find a left one thats grey or silver!!!

[dudeofchaos]

Because my right side fender has been bumped in. So instead of changing it for a usdm fender I want to change both fenders for Jdm's.
I woudn't do it anyways if I could cause I can't do it myself and I wouldn't want to pay someone to do it.

if its only the right side buy a jdm right fender from here!! although Im not sure if you can buy from nengun auctions since you aren't located in japan. go ahead and send the website an email to see if you can do so.

http://www.nengun.com/search/#t:u:y;v:71662;c:57;g:1

you should be able to find all 10 or so right fenders. let me know if you find a left one thats grey or silver!!!

Nah, my left side is a usdm. Can't have 1 of both.

[ZenAutoworks]

I have one right side JDM fender in silver here ($100 plus shipping)
Also left and right side repeater lights with leads ($25 each plus shipping)

I can probably find you a left fender in Japan too.

I'm in Calgary, AB.

[dudeofchaos]

I have one right side JDM fender in silver here ($100 plus shipping)
Also left and right side repeater lights with leads ($25 each plus shipping)

I can probably find you a left fender in Japan too.

I'm in Calgary, AB.

If you can find a left fender tell me right away! Would you know how much it would cost for the shipping? (Zip code: J7B 1S9)

[ZenAutoworks]

I have one right side JDM fender in silver here ($100 plus shipping)
Also left and right side repeater lights with leads ($25 each plus shipping)

I can probably find you a left fender in Japan too.

I'm in Calgary, AB.

If you can find a left fender tell me right away! Would you know how much it would cost for the shipping? (Zip code: J7B 1S9)

I will have to see about finding a left fender first.
If you are in a rush it will be very expensive to air ship ... if you are not in a rush, I can have it container shipped to Vancouver and then packaged up for shipment direct to J7B 1S9.

What colour is your car? I might have colour options to pick from if the stars line up.

[dudeofchaos]

I have one right side JDM fender in silver here ($100 plus shipping)
Also left and right side repeater lights with leads ($25 each plus shipping)

I can probably find you a left fender in Japan too.

I'm in Calgary, AB.

If you can find a left fender tell me right away! Would you know how much it would cost for the shipping? (Zip code: J7B 1S9)

I will have to see about finding a left fender first.
If you are in a rush it will be very expensive to air ship ... if you are not in a rush, I can have it container shipped to Vancouver and then packaged up for shipment direct to J7B 1S9.

What colour is your car? I might have colour options to pick from if the stars line up.

Countainer shipped? Isn't there any risk of damaging?
No I'm not in a rush so take your time, I'm taking out my celica in april-may.
My car is silver, but it doesn't really matter since I'm going to repaint them anyways. I just want absolute NO rust NOR dent on them, it's the only thing that matters to me.
Thanks!

[ZenAutoworks]

I have one right side JDM fender in silver here ($100 plus shipping)
Also left and right side repeater lights with leads ($25 each plus shipping)

I can probably find you a left fender in Japan too.

I'm in Calgary, AB.

If you can find a left fender tell me right away! Would you know how much it would cost for the shipping? (Zip code: J7B 1S9)

I will have to see about finding a left fender first.
If you are in a rush it will be very expensive to air ship ... if you are not in a rush, I can have it container shipped to Vancouver and then packaged up for shipment direct to J7B 1S9.

What colour is your car? I might have colour options to pick from if the stars line up.

Countainer shipped? Isn't there any risk of damaging?
No I'm not in a rush so take your time, I'm taking out my celica in april-may.
My car is silver, but it doesn't really matter since I'm going to repaint them anyways. I just want absolute NO rust NOR dent on them, it's the only thing that matters to me.
Thanks!

Container shipping is by far safer than air shipping when dealing with a fender. Don't worry, I wouldn't send out a bent fender ... just need to find one first.

Will let you know.

[dudeofchaos]

Alright, I'm not really familiar with shipping methods so I'll just trust you lol.
Come back to me if you ever have news! Thanks