FS: Aluminium Under Panel for 6GC - Last 12 pieces in NJ, To avoid shipping delay prefer NJ/East Coast Pick Up usd$200 Options

[chacha]

???

[vincent_doggy]

Folks here's some updates:

The MOQ for this order is 30pcs, gonna leave 5 pieces here in Hong Kong for local members.

The rest I am gonna send to Culpable04, NJ~

The most quantities would be 25 pieces in this batch~
This batch might only entertain US members, O'Canada or anywhere nearby~

The rough cost for the plates is around usd$170-200/pcs

This includes One Plate and 2 brackets(Pics would be posted once the sample is make) + Shipping cost from supplier to Culp's door, since I need to confirm the cost from supplier to EC, and Culp need to help me to pick up from the nearest port.

Once all the cost finalize, I would post up the exact cost and ready to collect your fund~

Regarding the domestic shipping cost from NJ to your home, I have no clue~
If you live at EC or somewhere nearby, you are lucky~

I am not sure if this price are attractive enough or not, but thats the best quote I could get~

Put your name down again if you really really interested and fund ready:

This post has been edited by vincent_doggy: Feb 27, 2011 - 9:44 AM

[BK94ST]

Can you post the pic again? The only thing I can see is a red X.

[vincent_doggy]

Can you post the pic again? The only thing I can see is a red X.

Pics up

[chacha]

i need to know what the full price ship to the USA vince...let me know

[vincent_doggy]

i need to know what the full price ship to the USA vince...let me know

USD$170-200 to NJ, USA

[chacha]

This post has been edited by chacha: Feb 27, 2011 - 3:44 PM

[Lazurus]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Haugbjorg
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) KAOS - I would love to get rid of that CRAP ABS stuff from underneath my car...
10) DaCCelica94 count me in since it will be affordable[/quote]
11) Lazurus (Need a total cost when you get it)

[MGCustoms325]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Haugbjorg
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) KAOS - I would love to get rid of that CRAP ABS stuff from underneath my car...
10) DaCCelica94 count me in since it will be affordable[/quote]
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325

[96stgreendemon]

Im still in, just curious as to if the ease of changing the oil will still be the same?

[Ted95]

Im still in, just curious as to if the ease of changing the oil will still be the same?

wondering the same thing. and isnt thi going to be heavier over all then the platic ones? but will be more aero dynamic? just tryin to figure this thing out, i like the look of it.

[vincent_doggy]

Im still in, just curious as to if the ease of changing the oil will still be the same?

Since, 6GC have few engines equipped

7AFE, 5SFE, 3SFE, 3SGE, 3SGTE, 4AGE......

I might redesign or simply cut a hole for easy oil change for my 3SGE...

But I don't think that are universal for all type of engine, I mean the hole.

So, I believe we better leave ot and stick with the C-ONE style design.

This post has been edited by vincent_doggy: Feb 28, 2011 - 10:52 AM

[vincent_doggy]

Im still in, just curious as to if the ease of changing the oil will still be the same?

wondering the same thing. and isnt thi going to be heavier over all then the platic ones? but will be more aero dynamic? just tryin to figure this thing out, i like the look of it.

Anyway, after thorough consideration, stick with aluminium would be the best bet.

The Genuine C-ONE is about 4kg, the one I am gonna make would use same grade material and spec.

I don't have an air tunnel to test the aero dynamic, but I bet C-one did that for long.

This post has been edited by vincent_doggy: Feb 28, 2011 - 11:21 AM

[Culpable04]

there are aerodinamic improvements with this item, but the really significant is the protection it offers to the oil pan, under panel is more known as skid plate, it aids to protect the lower portion of the engine / trans from rocks and foreign objects on the road. off road vehicules have it and is a must for a lowered car, I willl try to take pictures of what a rock did to my exhuast, gladly it was the exhausty and not my oil pan that was 6 inches to the left. this panel will add a lot of piece of mind when driving lowered on the streets.

[KAOS]

USD$170-200 to NJ, USA

So, let me get this right; we're supposed to pay for shipping to NJ, USA, and then pay for shipping/customs, etc from there to our doors?

Thats a little bizarre, but I understand the shipping in bulk thing.

Sounds like it could be a great product, but not for what its going to cost to get it to me, I'll pull out of the listing.

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Haugbjorg
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) spot available
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325

[Culpable04]

this is taken from C-one website

The C-One aluminum under panel protects the engine from objects passing underneath and provides reduced aerodynamic drag and increased stability at high speeds.

2mm thick aluminium
Reduces aerodynamic drag at high speeds using a flat surface
Increases stability at high speeds reducing front end lift
Protects the underside of the engine

is now discontinued and the retail price was someone close to 350 dollars + shipping to your door.

[mak5603]

Yeah i still want one.

[Fate]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Haugbjorg
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325

in.

[Culpable04]

all this talking and didn't even put my name down before lol


1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Haugbjorg
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325
13)Culpable04

[Boz205]

Whats the rough timeframe on these mate?
and shiping to Aus