Rave's Progress Thread, 3sgte Arrived 11/22/11 Options

[delusionz]

you turned an ugly car into a good looking car

how's the cold air intake? if done properly u should have a real noticeable difference

[rave2n]

you turned an ugly car into a good looking car

how's the cold air intake? if done properly u should have a real noticeable difference

Haha thank you! Much more to go soon enough.

It works alot better than the SRI did, though it is still a SRI, just ducted to my fender cold air access.

Drives more than 20 minutes its certainly noticable, doesn't feel like she is tired from sucking all that hot air. Powerwise..well, lol none. I just like the noise and look of it. I believe I would have to get my whole exhaust done to feel any real power gain from it...havn't gotten that far into the build yet =P

[rave2n]

Project on hold......



Pending my transfer to Flordia, and big promotion. Big changes, gota move my life...next chapter.


Now the question is...will I continue to turn my own wrench, or pay for it to be done. I think I'll continue to turn my own, as i do not get satisfaction out of openning my wallet, like I do getting my hands dirty.

Damn 6gc has turned me into a grease monkey!

[rave2n]

While project is on hold...


3rd Gen 3sgte payment made.

Will arrive in some months, as arranged.

Hella power increase to come, hope to have the swap done before winter.

Oh yea, Visor install, blacked tails, and new springs.







This post has been edited by rave2n: Mar 4, 2011 - 3:26 PM

[SwissFerdi]

Cool. Can't say I'm a fan of the dark tails, but it does complement the fuel flap nicely. Where in FL?

[CoreyST]

I like the rear window wing/visor where did you get it?

[Needles]

nice ride ! im gonna paint mine in black 100 % sure

[rave2n]

The tails i'm not to hot on. Temp either way, being I want to get the JDM ones, but the cheap can of spray stiffled my hunger to tweak something on the car at the time =P

Looking at Gainesville FL, the lady has already signed up for classes at Santa Fe, so possible as soon as middle of May.

CoreyST:

Look up vincent_doggy on the forums here. He fabs up alot of stuff for 6gc's, i'm not sure if he is still producing the visor, but you can either contact him directly, or order through his site kamikazi...something, in his profile =P - best send him a PM and ask what you are looking for. Most all my exterior pieces, excluding the rainguards are from him. Check'em out.

Needles:

Black is beautiful, but a bish to keep clean!

[SleekCelica]

I love the tails. looks nice!

[cheela]

you gotta get rid of that gold emblem on the back LOL. find the shadow emblems, those are hella rare but it'll make your car complete. either that or just debadge it.

[rave2n]

Lol yea I certainly do need to get rid of those badges...just been lazy with the outside, clear is starting to look like it has cancer on the front fender. Got all the pieces I want besides skirts, so i figured i'll tackle the body work once I get the swap done. The 7a is starting to sqeeze every penny out of me.

Clutch last month, battery was shot few weeks ago, and now the altenator bearings are screaming...which is what I believe shot the last battery so time to get that fixed...today =/

[Mycurse180]

Good looking ride man

[rave2n]

Final Payment made on 3sgte

Shall arrive in 4-6 weeks.

List of things to purchase:

S54 & linkage cables
Clutch Kit 3s clutch 5s plate =/
GT Throttle Cable
MAF Sensor?
GT AC lines - Compressor?
GT Rad Lines
GT Rad? - Aren't they the same from the ST to GT? If not...koyo will be purchased, and fans reversed.
Water Pump & lines
Complete seal kit before install
Timing belt
Hood of some sort, being stock intercooler will be used.


Mount and Crossmemeber already arranged.
Harness already converted
Already have a walbro pump
Guages will be done in a slightly different fashion - I will be using a Ladder logic PLC to control serial data input to a small IPX computer that will display programable guages to a small screen that will lift from the former air bag on the passenger side. While accomplishing this, most likly will just grab some cheap guages to monitor the import fields..boost oil?

This post has been edited by rave2n: Aug 5, 2011 - 1:55 PM

[rave2n]

3sgte came in today.

Was quite amusing as the delivery guy said "This must be a engine for a Tundra!" I say, no sir, and point to my celica...his jaw dropped =P







Much to do, much to purchase.

Going to be quite some time before I finish this swap, but thats how I roll. Slow, but right.

Found a service manual for it online, PDF form. Not sure who may need it, but I suggest grabbing it. These tend to disappear.

http://www.2shared.com/document/XJR02HzD/RM398E.html



This post has been edited by rave2n: Nov 23, 2011 - 10:22 AM

[rave2n]

Oh while we are on the topic...

Can anyone tell me wth I do with this AWD trannie. Basically, where I can exchange this bugger for some shells to invest in a S54.

[Ted95]

glad to see the motor came in, looks clean!

i just completed my swap this summer after having the motor for a year and buyin part by part researchin and such until my parts pile was big enough to start and finish the swap, hope everything goes smooth for you!

as for the tranny, just post it up and see if anyone will buy it. there isnt a HUGE market for them since theres not alot of awd 6gcs around here but there are people who convert them to fwd.

[rave2n]

glad to see the motor came in, looks clean!

i just completed my swap this summer after having the motor for a year and buyin part by part researchin and such until my parts pile was big enough to start and finish the swap, hope everything goes smooth for you!

as for the tranny, just post it up and see if anyone will buy it. there isnt a HUGE market for them since theres not alot of awd 6gcs around here but there are people who convert them to fwd.

lol same here, just researching and buying. Thankfully it came in right around tax time, so I can take care of alot of other maint issues with the cellie that i've been ignoring. To ashamed to list them out...nothing major, but its long!

Thanks for that info, I'll have to snap that trannie off, and get her up for sale.

[rave2n]

Started tearing the 3s down during my lunch break. Didn't get to far, but feels good to turn a wrench again.

I need to get it on a stand, but the deal I had on a hoist and stand on craigslist got sold out from under me. So potentially just going to buy new ones to get around the hassle of used items.

Useless pic!



I was trying to find any tell tale signs of the engines usage and age, but was unable to really figure that out.

The dipstick did not have any burns or shown excessive heat. Forgot my spark socket or I would have pulled one to see that. Took the oil cap off, but couldn't really see down there. Turbo doesn't seem to have any play..I assume thats good =P

One thing I did notice, is there is a black film on the intake manifold on the exit of the intercooler...is that normal? That same film was on the turbo air inlet.

This post has been edited by rave2n: Dec 12, 2011 - 1:12 PM

[ricochet1490]

I have no answers for you, but I'll be watching for sure. Good luck

[rave2n]

Todays activities included...getting that wiring harness off!



Was interesting, I did not remove the intake manifold, took me a good 20 mins to find all the little things to disconnect to get it through. That last ground wire under the manifold tricked me for a bit =P I might take it off to reinstall it.

I also need to figure out who is paying for this harness conversion...it was sappose to be done, so time to send some messages =P



Gunna be sitting like that for a while. Next action is to remove that trannie, and get it up for sale. Speaking of which, anyone need the mount for it? I can easily remove it.