FS: Hatch Part-out!!!!, Come and get what you need Options

[96stgreendemon]

Ok, This has been updated as of June 4th
-Invader rear bumper (actually in good shape) - $50, i will not ship this come pick it up

-OEM hatch rear bumper - Make offer

-C-One replica fiberglass front bumper (taken some abuse, but for right price will fix and make sure it fits without issue) - $50, yes it needs work, will not ship, will sell this and invader style rear for $75

-Newer A/C compressor - 40+ shipping

-Newer 5sfe clutch and pressure plate- $50 + shipping
-flywheel - $20 + shipping

-Hatch with glass, for right price may come with 2 post also - $100, will not ship

-Rando 5sfe parts - offer

-pumps lines etc

-ABS Main Unit - 20+ shipping

-Brake fluid container - $20+shipping

-Proportioning valve - 20+shipping

-Power steering container - 15+shipping

-5sfe starter - 20+shipping

-5sfe oem header - 30+shipping

-USDM hatch tails - 40+shipping



-5sfe polished valve cover- First 50+Shipping takes it


-5sfe polished intake manifold *50+shipping

-water outlet - 10+shipping


-5Sfe cams, $30+shipping

-

-5sfe header heat shield - 20+shipping

-Upper timing cover, interior and exterior 20+shipping



-5sfe Throttle body - 20+shipping

-GT brake proportioning valve

-






-5sfe M/T ECU

-Hatch weatherstrip







White hatch


Just make me an offer on this stuff, i would really like to get it out of my garage so i can make room for this clip, no reasonable offer turned away

But really, make me an offer i really need the space for this clip by next week, alot of this will go to the junkyard if not sold








Im sure i have more than this, just what i can remember off the top of my head, shoot me a pm if there is something your interested in! and dont be afraid to give me an offer, im more than reasonable, also willing to trade parts + cash for 3rd gen 3sgte parts

This post has been edited by 96stgreendemon: Jun 4, 2011 - 9:20 PM

[playr158]

Can you pm me a picture of the c1 bumper and what about from control arms?

This post has been edited by playr158: May 16, 2011 - 8:19 AM

[perkyshadow]

Hey man! I tried to send you a message, but it wouldn't let me!

Here's a few parts that I really need:

1. Shifter surround for a manual. (plastic part)
2. Plastic under the engine with screws and clips.
3. Tweeter covers

If you've got any, just let me know what you need to get with shipping included to 2035 Pine St, West Columbia, SC 29170. There's a nearby Greyhound station in Columbia, SC if that's cheaper! Thanks man!

Jason

[senick]

Would the shifter cables off this work with an AT200? And let's see...clutch pedal assembly and lines? Those might be a pain to get out though, if so I understand.

[Por2geezcelica]

Your not accepting any pms for some reason. I need a passenger side high beam if you have one

[HectortheRican]

I tried to message you, but it says your messaging is disabled? I dunno... but this was the message.

If it's a manual, could you send me this little clip? I remember telling you about the troubles it gave me while installing the SS.

[SoDo]

Do you have the plastic clips that hold the privacy hatch cover?

[TheChildOfTheSea]

Send me a picture of the COne bumper

[96stgreendemon]

C one bumper is cracked in a few places will upload pics tomorrow, control arms are done, no plastics, most interior parts are gone

[JasonTX]

looking for the pass. side hinge for the hatch privacy cover

[96stgreendemon]

Sorry almost no interior plastics

[JasonTX]

what about the rear 1/4 windows if the moulding is in good shape

[96stgreendemon]

No, dont have the molding

[richee3]

Do you have essentially the whole car or basically just what is listed? There are some parts I'd love to have and I could come pick them up so you wouldn't have to deal with shipping.

This post has been edited by richee3: May 17, 2011 - 4:25 PM

[TheChildOfTheSea]

Still waiting for the COne pics bro

[96stgreendemon]

Richee3 PM me what parts you need, pulled just about everything out of the car that was left on it and then it went to the salvage yard today but i do have alot of parts taking up space
and teh bumper is not a C-One as far as i know, i believe it may be just a cheap o reproduction, going to try and have pics up tomorrow

[96stgreendemon]

Bump, update for pics

[95celicastLSR]

Do you have a left front wheel Spindle?

[96stgreendemon]

I do have the left front spindle, let me take a look at it and make sure it is good though, car took a hit to a tree

[jimmykay]

bumpity bump.

interested in the white hatch