 What part is this?? |
  |
 Aug 7, 2011 - 4:39 PM
|
 
|
|
Enthusiast  Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%)  |
Hey guys, this switch or sensor (the one with the green wire coming out of it) apparently was pretty worn out and snapped off when I was pulling out a wire from the distributor cap. Does anyone know what it is? It sticks straight up off the pipe that connects into that side of the cylinder head.
 A closer look... 
This post has been edited by 6G96GT: Aug 7, 2011 - 4:47 PM |
|
Aug 7, 2011 - 4:41 PM
|
|
|
Enthusiast Joined Dec 11, '07 From Davie, Florida Currently Offline Reputation: 4 (100%) |
Hmm, could you possibly post a pic?
-Ryan |
|
Aug 7, 2011 - 4:47 PM
|
|
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
Sorry bout that, just did.
|
|
Aug 7, 2011 - 4:56 PM
|
|
|
Enthusiast Joined Dec 11, '07 From Davie, Florida Currently Offline Reputation: 4 (100%) |
Wow, I really don't know what that is. Sorry. Hope you find out soon though.
-Ryan |
|
Aug 7, 2011 - 5:15 PM
|
|
 Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
that looks like a coolant temp sensor, If i remember right. This is a 5s correct?
--------------------  |
|
Aug 7, 2011 - 5:19 PM
|
|
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
Yes it is a 5sfe. I ran the engine with that sensor broken and my temp gauge worked fine. Is that the same sensor-to-gauge?
This post has been edited by 6G96GT: Aug 7, 2011 - 5:20 PM |
|
Aug 7, 2011 - 5:27 PM
|
|
 Enthusiast Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) |
Generally 2 wires on that back housing in coolant temp. One wire is fan switch. The gauge sensor is typically much smaller and is single wire... usually between head/block water passage. The engine will run fine generally with a bad coolant temp sensor when warm... ****ty when cold.
-------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
|
Aug 7, 2011 - 5:30 PM
|
|
 Enthusiast Joined Jul 24, '08 From Canoga Park CA. Currently Offline Reputation: 0 (0%) |
QUOTE (Kwanza26 @ Aug 7, 2011 - 6:27 PM)  Generally 2 wires on that back housing in coolant temp. One wire is fan switch. The gauge sensor is typically much smaller and is single wire... usually between head/block water passage. The engine will run fine generally with a bad coolant temp sensor when warm... ****ty when cold. Yes temp sensor for cold start, mine would not start when it was cracked, it is 15 dollars at autozone |
|
Aug 7, 2011 - 6:17 PM
|
|
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
thanks guys, so I can run it now without any worries?
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2024 - 12:08 AM |