FS: Gramlights 17x8.5 / Jasma Header / Greddy Muffler / Other Goodies Options

[jmeyer]

Prices don't include shippping, first come first serve.

Rays Gramlights 57C 17x8.5 40mm offset. I bought these for my white GT-4 but found a set of takata green TE-37s I'm gonna run. They are brand new and I only peeled the plastic off one to test fit it. They cost much more than what i'm asking. ($1200)




JDM Jasma Header. It's for a 3sge but worked excellent on my 5sfe beater. It's one of the only JDM headers made that will work on our GT celicas. It comes with a modified stock midpipe so it will be direct bolt on. If you want a $20 header check ebay if you want a real JDM header with quality this is it. Modified O2 sensor included so it will work on a obdII car or obdI (SOLD)




New Greddy Street Tuned Muffler. I was going to fit it for my gt but had a change of heart. Few dings on the bottom nothing major. ($150)




New Koni Rear Adjustable Struts, extra pair I wont be using, if you know handling you know Koni is king. ($150)


AEM Big Brake kit, large rotors and brackets to move calipers out. Must run 17" or bigger. ($250)



GTech Pro RR Meter, used at a couple autox events. It can measure 1/8, 1/4 times, hp and torque curves, g's, and rpm/ shift light. ($200)



This post has been edited by jmeyer: Aug 23, 2011 - 8:27 AM

[freddy121389]

Why did your other post close?

[jmeyer]

I forgot FS in the topic lol

[dustin15brown]

Good stuff there! Debating buying some even though I moved to Australia. Haha. What's the inlet/outlet on the muffler?

[block]

oooo i want to sell my rims for those grams!

[bizzerk]

hey buddy, you have anymore pictures of the koni yellows? Is it just laying on the the side or is there no mount to install these?

[RabidTRD]

I want the header! Would you do local pickup? I live an hour and twenty mins away and will drive to buy this from you. Also, how many O2 bungs does it have? I've got a Cal Emission OBD1 94 Japan built ST204. Will I have to get another bung welded in?

This post has been edited by RabidTRD: Jul 23, 2011 - 8:37 PM

[joehernandez]

That muffler is it 3"? If so. ...I'm down....let me just find a gtfour with it just to hear the noise

[jmeyer]

The koni's are inserts, the instructions how to install them is included. The muffler has a 60mm inlet.

[BonzaiCelica]

I want the header! Would you do local pickup? I live an hour and twenty mins away and will drive to buy this from you. Also, how many O2 bungs does it have? I've got a Cal Emission OBD1 94 Japan built ST204. Will I have to get another bung welded in?

94-95 Celica all have 2 sensors or atleast thats the way my California Celica was built. As far as japanese spec engines. I believe they only came with 1 oxygen sensor. The secondary oxygen sensor on 94-95 obd1 vehicles was just to monitor anything that the primary sensor missed.

Can you get an Measurement of the Rear Koni Inserts? Are they the same length as stock size cartridges? I thought the rears weren't rebuild-able????

[jmeyer]

I have used Koni's numerious times in celicas. The install is straight forward, the insert will slide into your existing struts after the old cylinder and fluid is removed. It is then bolted at the bottom to keep the unit contained.

[BonzaiCelica]

alright cool thanks for the info. Just as I though they are the same length as stock struts

[freddy121389]

Bump for a good guy

[mrtwo]

do these prices include shipping? if not, how much for the mr2 brake pads shipped to 85281?

thanks

[tim86]

is anything else needed to install the AEM big brake kit?

[jmeyer]

Yes everything is there

[mandrek]

are the koni's stil availible?

[jmeyer]

Yes Sir

[99gt3sge]

are those big rotors are for a gt4 or can i use them on a gt?

[jmeyer]

they are for a gt