Needle's progression thread Options

[Needles]

Please. For the love of god learn proper english. You cannot "drill a hole" into glass. But please, by all means, try.

yes you can..

http://www.youtube.com/watch?v=wOpPsqugPfI...feature=related

This post has been edited by Needles: Feb 1, 2012 - 10:22 AM

[Needles]

I think he means PLEXIGLASS... jrunik just sold some clear lenses for just this purpose , but he took the pic off of his FS thread

right

[Needles]

why would you put fiberglass on glass? FIBERGLASS IS FOR BODYWORK, NOT HEADLIGHTS.

and why not try to make your own molds, it shouldn't be too hard to do.

making my own mold ....
yeah, that can be done, maybe if i fill the inside of the lens whit some material and ,
after that, pull back the material out of ther lens
and cover it whit a plexiglass and
heat it up until it take the form.....

or if someone have a better ideas ^?

This post has been edited by Needles: Feb 1, 2012 - 10:36 AM

[SupraKid]

Please. For the love of god learn proper english. You cannot "drill a hole" into glass. But please, by all means, try.

yes you can..

http://www.youtube.com/watch?v=wOpPsqugPfI...feature=related

That is a perfectly flat piece of untreated, unaltered glass, our lenses are neither. But again, please try and video tape it.

or if someone have a better ideas?

Here's an idea, BUY SOME PROJECTOR HEADLIGHTS. That way at least your headlights will be built well.

This post has been edited by SupraKid: Feb 1, 2012 - 1:16 PM

[Needles]

Please. For the love of god learn proper english. You cannot "drill a hole" into glass. But please, by all means, try.

yes you can..

http://www.youtube.com/watch?v=wOpPsqugPfI...feature=related

That is a perfectly flat piece of untreated, unaltered glass, our lenses are neither. But again, please try and video tape it.

or if someone have a better ideas?

Here's an idea, BUY SOME PROJECTOR HEADLIGHTS. That way at least your headlights will be built well.

i dont have 600$ for headlight plus 150$ for shipping... when i only need the lenses

This post has been edited by Needles: Feb 1, 2012 - 2:23 PM

[kurt95gt]

Honestly i think needle has the right idea on this one if he does it right
Personally i think the price of the stock projectors is stupid high

[SupraKid]

Honestly i think needle has the right idea on this one if he does it right
Personally i think the price of the stock projectors is stupid high

Those 2 words don't belong in the same sentence. And no, for an OEM part that delivers light so greatly and looks so epic that price is great. If you want cheap parts go get a honda.

This post has been edited by SupraKid: Feb 1, 2012 - 4:30 PM

[kurt95gt]

Ive done honda its boring because its so cheap. An needles isnt the first on here to make his own lights.
Yea there a great light an for them being factory at a desent price but not everyone can drop 600 on lights when they can make there own unique light for alot less. Thats all im saying

[SupraKid]

Can you please provide some links to some people who have made "custom lights"? I know the clear lenses from Rayme are floating around, but other than that I thought it was pretty much all talk.

[kurt95gt]

Ill try to find it


http://www.6gc.net/forums/index.php?showto...rojector+lights

[SupraKid]

Raymes lenses are as rare as trd bumpers. And even IF you can find a set when you price in the rest of the parts your gonna be close to the price that OEM projectors are.

[Needles]

Honestly i think needle has the right idea on this one if he does it right
Personally i think the price of the stock projectors is stupid high

Those 2 words don't belong in the same sentence. And no, for an OEM part that delivers light so greatly and looks so epic that price is great. If you want cheap parts go get a honda.

hey man , if you need to bs myself each time you wrote in my thread... just go somehere else, go empty your frustration out of my thread stupid prick !!
i care about others opinion, but seriously suprakids , go to hell !!

and yeas those two word belong in the same sentence , if you dont like what ppl write up here, go tell them directly , i dont need such a commentary , useless ,


This post has been edited by Needles: Feb 1, 2012 - 8:05 PM

[SupraKid]

I'm telling you directly. I don't like what you write. I think you have some good ideas and could have a very nice celica if you didn't half ass everything and did some simple maintenance here and there.

[kurt95gt]

Y dont you both leave eachother alone
Needles if you dont like his opinion ignore it
Suprakid if ya dont like his thread dont read it

[Needles]

Raymes lenses are as rare as trd bumpers. And even IF you can find a set when you price in the rest of the parts your gonna be close to the price that OEM projectors are.

i already have the projector, its gonna cost 50$ maximum of plexiglass,
i already setup my own ideas how to do it, i will have the piece tommorow and i will show the progress

i will put the plexiglass on the lenses, and i will heat it up whit my heat gun
when the surface gonna get the good shape, i will cut it all around , but i will need to create the border ,
for that, i will use aliminum since the border of the lenses are invisible due to the black rubber around the lenses,
and glue it to the lenses,
i will also maybe put custom mini led on the side,

i dont know if i will get smoke plexi or clear....

i already work on the inside , to create the pattern around the projector, that is i think, gonna be the hardest part, ist the design of the headlight and need to be ecxat thing for each side

i have a few pic of my version 0.01 whit the frosty lenses...

[SupraKid]

Y dont you both leave eachother alone
Needles if you dont like his opinion ignore it
Suprakid if ya dont like his thread dont read it

But where else will I get my laughs from?

[Needles]

Uploaded with ImageShack.us


Uploaded with ImageShack.us
<script src='http://img192.imageshack.us/shareable/?i=1328129185312.jpg&p=tl' type='text/javascript'></script><noscript></noscript>


Uploaded with ImageShack.us


Uploaded with ImageShack.us

and i just get my st205 motor mount yesterday



Uploaded with ImageShack.us

[kurt95gt]

Y dont you both leave eachother alone
Needles if you dont like his opinion ignore it
Suprakid if ya dont like his thread dont read it

But where else will I get my laughs from?

Just go look at my threads for awhile
I got 2 f them im sure you can find somethin to make ya laugh

[kurt95gt]

Lookin good

[Needles]

chrome , frosty lense on it



Uploaded with ImageShack.us

This post has been edited by Needles: Feb 1, 2012 - 11:04 PM