Performance Exhasut Query, What fits & what don't? |
Performance Exhasut Query, What fits & what don't? |
Aug 31, 2012 - 5:04 AM |
|
Enthusiast Joined Aug 17, '12 From Horsham Currently Offline Reputation: 0 (0%) |
I have a 1996 Celica ST (7AFE AT200 1.8 T20) but the problem I have is finding an exhaust system in the UK that fits it. I have found a tubular manifold on ebay on a 4-2-1 layout with the O2 sensor flange but my issue is finding a cat back system.
Looking through the forums people say that the ST202 system fits but say that it is about 2-3 inches short. I have found this on eBay http://www.ebay.co.uk/itm/150777163660?ssP...984.m1436.l2649 but it's for the ST205. I can't find anything else really. My plans for the exhaust atm are: tubular 4-2-1 manifold/headers sports cat back with a 4"-5" tail pipe swap in/out decat pipe so that I can put it in for MOT and then remove it again after MOT possibly (depending on noise level and note) remove front silencer and make straight through to muffler(s) Iam likely to look into doing a 7AFTE conversion in a couple of years time or maybe swap in a 3SGTE lump. I've also found this system on eBay for an ST202 but I want to know if it will fit before I bid/buy. http://www.ebay.co.uk/itm/261090363414?ssP...9#ht_500wt_1288 I need to change my exhaust system before MOT as I have a few holes in it but don't see the point in standard replacement if I'm going to performance exhaust it. Many thanks in advance Rob |
Aug 31, 2012 - 6:25 AM |
|
Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
st205 exhaust wont fit anything but an st205
the st202 exhaust you posted is actually st182, dont know how that will fit if at all. if you do find an actuall st202 (or other 6gc except 205) exhaust and it doesnt meet up, just have a short joiner fabbed up -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
Aug 31, 2012 - 10:35 AM |
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
i think the dual exhaust setup is off of another members (KAOS) car.
I wasnt a fan of the design, because most of the exhaust would be directed out of the one side. -------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
Aug 31, 2012 - 11:32 AM |
|
Enthusiast Joined Aug 17, '12 From Horsham Currently Offline Reputation: 0 (0%) |
ST182...thats Gen5??
The listing lists it as an ST202 and the car underneath looks relatively similar to my AT200. I did email the guy and ask him about the car it has come off of and apparantly its a Gen6. He described the car as a Gen6 Celica with a Quad Lights on the front... the Gen5 had pop up IIRC??? Anyway if it is an ST202 you are saying that at worse it could be 2-3 inches short of marrying up to the cat. |
Aug 31, 2012 - 3:26 PM |
|
Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
Oh ok , usually I'd recognise the back/underneath a 6gc like the back of my hand , in this case the spare tyre well looks funny
-------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
Sep 6, 2012 - 3:36 PM |
|
Enthusiast Joined Aug 17, '12 From Horsham Currently Offline Reputation: 0 (0%) |
OK. I wasn't doubting you I did have to look twice too. I think it's because of the pipe running past it. Someone else has bought it anyway so I'm going to look into doing something else a bit more custom with my car.
|
Lo-Fi Version | Time is now: November 28th, 2024 - 8:58 AM |