 Test fit of my custom lamps. Halo Projectors, Finished on Page 4 |
  |
 Aug 14, 2012 - 2:43 PM
|
 
|
 Enthusiast  Joined Aug 11, '08 From London Currently Offline Reputation: 7 (100%)  |
QUOTE (BeachBum12 @ Aug 11, 2012 - 9:13 PM)  QUOTE (yellowchinaman @ Aug 11, 2012 - 3:47 PM) QUOTE (BeachBum12 @ Aug 11, 2012 - 2:55 PM) True true, so will you still be able to use the original alignment setup on the stock housing once your done?? Yes. One other thing is that the peons can adjust horizontally as well as vertically meaning it's easy to direct and age the lamps after fitting. I'm not sure if that can be done with the 500 lol sweet how much longer till we get to see the finished product Mann?? Not till a while Today I had a bit of time and replicated the other side and bolted it together.  The next stage is the messy and long part. Sanding the hybrid housing down and bonding it together. Then spraying and neatening up the chrome inserts and the housing so it's presentable. This post has been edited by yellowchinaman: Aug 14, 2012 - 2:44 PM |
|
Sep 1, 2012 - 11:34 PM
|
|
 Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
Dang. This is getting REALLY REALLY interesting now. Read the first page and was like wtf was this guy thinking. Doing all that body work. Skipped to the last page(hoping to see the finished product), found out you were going to hybrid the two light housing instead. That made me REALLY interested in this. Lol. Now I'm thinking This guy is a ****ing genius! Can't wait to see the outcome!
-------------------- |
|
Sep 4, 2012 - 3:55 AM
|
|
|
Enthusiast Joined Aug 11, '08 From London Currently Offline Reputation: 7 (100%) |
QUOTE (ILoveMySilly97 @ Sep 2, 2012 - 12:34 AM) Dang. This is getting REALLY REALLY interesting now. Read the first page and was like wtf was this guy thinking. Doing all that body work. Skipped to the last page(hoping to see the finished product), found out you were going to hybrid the two light housing instead. That made me REALLY interested in this. Lol. Now I'm thinking This guy is a ****ing genius! Can't wait to see the outcome! hahaha. Thanks. Thats a really nice complement. I do thinkgs like this for a living being a co-owner of RT-Performance Its a shame I do things like this for customers all the time but don't have much of a chance to do my own car. |
|
Sep 4, 2012 - 6:24 PM
|
|
 Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
nice, just wondering how busy the front end would look like with so many lights.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
|
Sep 4, 2012 - 11:44 PM
|
|
|
Enthusiast Joined Dec 29, '05 From So-Cal Currently Offline Reputation: 12 (100%) |
QUOTE (yellowchinaman @ Sep 4, 2012 - 4:55 AM) QUOTE (ILoveMySilly97 @ Sep 2, 2012 - 12:34 AM) Dang. This is getting REALLY REALLY interesting now. Read the first page and was like wtf was this guy thinking. Doing all that body work. Skipped to the last page(hoping to see the finished product), found out you were going to hybrid the two light housing instead. That made me REALLY interested in this. Lol. Now I'm thinking This guy is a ****ing genius! Can't wait to see the outcome! hahaha. Thanks. Thats a really nice complement. I do thinkgs like this for a living being a co-owner of RT-Performance Its a shame I do things like this for customers all the time but don't have much of a chance to do my own car. I'm glad that you do and your work shows for we 6gc owners are limited to performance parts since no one really knows about the history of the 6g CELICA(s) in the market. i can answer your question. You don't have time to do it for yourself because it is SILLY giving yourself a bill to paid for the work done. 
This post has been edited by chacha: Sep 4, 2012 - 11:47 PM |
|
Sep 5, 2012 - 11:02 AM
|
|
 Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
So what are you doing with that gap where the blinker was suppose to be?
|
|
Sep 6, 2012 - 3:45 AM
|
|
|
Enthusiast Joined Aug 11, '08 From London Currently Offline Reputation: 7 (100%) |
QUOTE (mkernz22 @ Sep 5, 2012 - 12:02 PM) So what are you doing with that gap where the blinker was suppose to be? I changed my mind about that. Keeping it and bought my self some crystal lenses. Where the indicator should be at the top of theNeon cluster is, I'm putting 3 501 bulbs in to work in conjunction with the halo's as park lights. |
|
Sep 6, 2012 - 12:12 PM
|
|
 Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
looks real good so far. can't wait for the finished product.
--------------------  *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
|
Sep 11, 2012 - 11:13 AM
|
|
|
Enthusiast Joined Aug 11, '08 From London Currently Offline Reputation: 7 (100%) |
Had a bit of time today to do a bit more.
First using thin masking tape, bridge the gaps. Reason why I'm using thin tape is because it's absorbent to resin and this is a great way to cheat.  Then trim off all the excess and using small pieces of fibreglass, start apply by brushing on the resin to the lamps, then on the fibreglass shess and then dab them in place.  So these are left on the drying rack and next time I'll just sand them down and dismantle it before spraying the housing black. |
|
Sep 11, 2012 - 1:29 PM
|
|
 Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
I'm starting to get anxious, can't wait for them to be done and on the car!
-------------------- 2001 Miata LS 5-speed
|
|
Jan 9, 2013 - 3:18 PM
|
|
|
Enthusiast Joined Aug 11, '08 From London Currently Offline Reputation: 7 (100%) |
Thanks bud. So when would you like for me to do yours then?
Anyway regarding my head light, I never got round to posting pictures. So here it is: This is all the pieces which forms the lamp layed out.  Here are the bulbs fixed in which retains the full adjusting rods meaning I can angle them when on the car  Access to bulbs and wires are easy  Halo's with the reflective backing  Halo wires are sealed using these bungs making it water tight  I heated the old glue and taped the clear covers in till it set.  Then for extra insulation I used PU glue all the way round making it air tight  The same glue was also used around the lense cover so I can glue the rubbers on  Tape and set in place  Finished    Now I just need to get hold of the wiring looms for the 4 lamps and wire in the plugs to this |
|
Jan 9, 2013 - 4:02 PM
|
|
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
So close...
-------------------- 2001 Miata LS 5-speed
|
|
Jan 9, 2013 - 5:15 PM
|
|
 Enthusiast Joined Jan 20, '09 From Winnipeg Currently Offline Reputation: 5 (100%) |
Wow, these look UNREAL!
-------------------- -Protection mode, For when your amp tries to blow its load. 1995 Toyota Celica GTS - Daily Driver 1999 Chevy Cavalier - Winter Beater 1994 Honda Civic CX Hatchback - Dead My Celica! |
|
Apr 6, 2013 - 7:37 PM
|
|
|
Enthusiast Joined Aug 31, '05 From Houston TX Currently Offline Reputation: 7 (100%) |
Update! how does it look on the car?
-------------------- |
|
Apr 6, 2013 - 9:20 PM
|
|
|
Enthusiast Joined Apr 6, '13 From Whitakers Currently Offline Reputation: 0 (0%) |
when will c them fitted they r hot
|
|
Apr 15, 2013 - 8:36 PM
|
|
|
Enthusiast Joined Apr 6, '13 From Whitakers Currently Offline Reputation: 0 (0%) |
QUOTE (Tatthabarber @ Apr 6, 2013 - 10:20 PM) when will c them fitted they r hot I concur. Do you want to sale um. Cause i want them ill wire myself. You wont have to thru the trouble |
|
Apr 16, 2013 - 3:44 PM
|
|
|
Enthusiast Joined May 14, '05 Currently Offline Reputation: 0 (0%) |
Wow...
|
|
Apr 16, 2013 - 7:45 PM
|
|
 Enthusiast Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) |
Well... I don't hate it. I'm anxious to see how it looks completed.
--------------------  Project ST204.5 99.88946% complete... |
|
Apr 24, 2013 - 11:59 AM
|
|
 Enthusiast Joined Jan 23, '13 From New Jersey Currently Offline Reputation: 0 (0%) |
PLEASE UPDATE!!! cant wait to see them on the car!
-------------------- white 1997 Celica GT***FOR SALE
|
|
May 1, 2013 - 4:23 PM
|
|
 Enthusiast Joined Jul 30, '04 From colorado Currently Offline Reputation: 1 (100%) |
nice!! i wouldnt mind having something like that on my car
|
|
6 User(s) are reading this topic (6 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2024 - 9:54 AM |