bearing at top of strut |
bearing at top of strut |
Dec 13, 2012 - 2:57 PM |
|
Enthusiast Joined Feb 24, '11 From mass Currently Offline Reputation: 1 (100%) |
have a "creaking" noise coming from strut when I turn the wheels going slowly. Anyone else had a similar problem? Just had the struts replaced, but someone said it could be the bearing at top of strut, which was not replaced. The car has 170k miles on it.
Thanks, Peter |
Dec 13, 2012 - 3:13 PM |
|
Enthusiast Joined Oct 29, '11 From Haltom City, Texas Currently Offline Reputation: 1 (100%) |
Strut mounts, you should always change them with the strut.
|
Dec 13, 2012 - 7:54 PM |
|
Enthusiast Joined Jul 24, '08 From Canoga Park CA. Currently Offline Reputation: 0 (0%) |
|
Dec 13, 2012 - 8:34 PM |
|
Enthusiast Joined Apr 18, '05 From Lincoln, Ar Currently Offline Reputation: 7 (100%) |
Blast it with some WD 40.
|
Dec 13, 2012 - 10:08 PM |
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
have a "creaking" noise coming from strut when I turn the wheels going slowly. Anyone else had a similar problem? Just had the struts replaced, but someone said it could be the bearing at top of strut, which was not replaced. The car has 170k miles on it. Thanks, Peter Yup, I had this exact problem. At first I thought it was an assembly issue, so I took the strut apart and put it back together. After that didn't work, I bought a new strut mount. When I went to replace it, the bearing completely fell apart! Needless to say that was the issue. Its also possible that whoever did the strut didn't line up the upper spring holder with the arrow that should point out. If that is installed in the wrong direction, it can cause the spring to creek. This post has been edited by lagos: Dec 13, 2012 - 10:09 PM -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Lo-Fi Version | Time is now: November 30th, 2024 - 6:10 PM |