|
Topic Title |
Replies |
Topic Starter |
Views |
Last Action |
![No New Posts](style_images/1/f_norm_no.gif) |
Charge cooler help !! PleaseHiJust bought a gt4 and on the way home my dad decided to try and put oil in the charge cooler, it's only a small amount but am a few hours from home and the engine light has come on? What can I d...
|
5
|
Max5437 |
3,918 |
December 15th, 2015 - 7:13 PM Last post by: texasnick |
![No new](style_images/1/f_hot_no.gif) |
individual coil signal to tach :(my setupgen III 3sgte with autronic ecu + individual audi 1.8t coils (the stable year versions). Each coil has its own built in igniter and 4 pins: positive from switched connection, signal ground, ec... 12
|
22
|
match220 |
20,253 |
November 23rd, 2015 - 12:31 AM Last post by: davenirish |
![No New Posts](style_images/1/f_norm_no.gif) |
Engine Bearings on Forged BuildCurious what people think about running mixed bearings. First off, I'll be running Wiseco pistons bored .5 over, Brian Crower rods, on a polished stock crank. My thoughts are to match numbers on t...
OEM Main/TW and ACL Rod?
|
1
|
6G94celica |
2,930 |
October 13th, 2015 - 4:01 PM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
st215 3sgte in my st202 Please helphi guys i'm new to this forum and am looking for help with a project of mine so any help would be much appreciated.START READING FROM PARAGRAPH TWO IF IN A RUSHSo here it is I brought my first car...
|
13
|
aaronmc |
6,043 |
October 11th, 2015 - 2:38 AM Last post by: aaronmc |
![No new](style_images/1/f_hot_no.gif) |
doing a 3S-GTE swapOk i have been reading all the threads and I have a few questions for Dustin and others that have done this.in Bsamps4 thread he says the fuel pump relay is in this box, in the GT the fuel pump relay... 1234
|
68
|
Smaay |
29,934 |
October 8th, 2015 - 1:17 AM Last post by: chacha |
![No new](style_images/1/f_hot_no.gif) |
The 3SGTE Swap*THIS IS FOR INSTRUCTIONAL USE*READ THIS BEFORE ASKING A QUESTION90% of the time the answer is here. Hey guys,I figured I'd do a write up while I was doing my swap. Later on we can edit... 123» 7
How-to
|
125
|
defgeph |
350,336 |
October 2nd, 2015 - 9:55 AM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
Trouble Shooting my 5sfte buildSo i have been slowly progressing with this build and ive ran into alot of minor problems due to past history with the car.Currently I have everything installed but here is what I am running into.Afte...
|
3
|
JPATTT |
5,671 |
September 5th, 2015 - 11:55 PM Last post by: HardHead93 |
![No New Posts](style_images/1/f_norm_no.gif) |
2jz map sensor on the 3sgte 3rd gen ?Hey i have a supra map sensor runing on my 3sgte 3rd gen but i have hard time geting the car running the right boost i wanna know if is the map sensor or something else this is the oar nunmber of the...
|
2
|
Caifan68 |
3,798 |
September 3rd, 2015 - 3:24 PM Last post by: Caifan68 |
![No New Posts](style_images/1/f_norm_no.gif) |
stock diverter valveOn the stock diverter valve on a st205, there is a filter on in the vacuum line that is purple on one side an black on the other. Does anyone know which way it is supposed to be mounted?
|
4
|
skogs |
3,196 |
August 21st, 2015 - 5:06 PM Last post by: skogs |
![No New Posts](style_images/1/f_norm_no.gif) |
|
1
|
FunkySR |
2,805 |
August 16th, 2015 - 8:33 PM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
|
7
|
Smaay |
4,485 |
August 12th, 2015 - 4:40 PM Last post by: match220 |
![No New Posts](style_images/1/f_norm_no.gif) |
Possible 3s-gte swap!!!Hello Ladies and Gents! I have had my Celica for a few years now and I was wanting to get more power as a lot of us do! I have been looking at getting a 3s-gte engine along with a Celica GT so...
I need help planning a swap and what I would need! :)
|
16
|
Brandroid94 |
6,221 |
August 5th, 2015 - 1:04 AM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
aftermarket oil coolerLooking at installing a B&M oil cooler just wanted to know if there is enough room for it along with a fmic. I also have a GT4 front bumper.
Is there enough room
|
2
|
NWCelica |
3,084 |
August 3rd, 2015 - 7:10 PM Last post by: Box |
![No New Posts](style_images/1/f_norm_no.gif) |
5sfte Fuel SystemHey, I have read tons of threads and info on the 5sfte project, and I am getting a bit of mixed info. I was wondering if you guys could help me get it straight. Some places say run 315cc injectors,...
Help with turbo project
|
3
|
JohnnyGat0519 |
3,399 |
July 19th, 2015 - 3:07 PM Last post by: JohnnyGat0519 |
![No New Posts](style_images/1/f_norm_no.gif) |
2nd Gen Rebuild shopping cartRebuilding my 91 JDM 3SGTE. The block is currently at the machine shop and he told me the cylinders are all .002" to .003" out of round (front to rear). Looking for some input as to which br...
Which brands to go with
|
4
|
6G94celica |
3,606 |
July 16th, 2015 - 11:17 AM Last post by: 6G94celica |
![No New Posts](style_images/1/f_norm_no.gif) |
95 convertible turbo helpHey everyone, I am new to the site, and am looking for any info on turbocharging my 95 Celica convertible. I don't want to go crazy, just push around 9-10 psi. I had read an article on turbocha...
|
7
|
JohnnyGat0519 |
4,098 |
July 16th, 2015 - 10:47 AM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
should my turbo sound like this?I get a constant whine from the turbo that doesn't change pitch regardless of rpm or boost pressure. I think it may be a leak but I'm not sure.is this sound normal??view the video to hear i...
constant whine from the turbo from 5-15 psi
|
4
|
antoine64 |
3,770 |
July 15th, 2015 - 11:39 PM Last post by: antoine64 |
![No New Posts](style_images/1/f_norm_no.gif) |
Soo.... Understanding VacuumAlright so tried to research this in depth but want to make sure I totally understand the PCV or lack there of on the 2nd gen 3sgte. Please read my findings and fill me in if im incorrect.As I underst...
PCV
|
2
|
6G94celica |
3,448 |
July 12th, 2015 - 11:23 PM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
Rebuild costBlueprinting & Balancing. Cost? Is it necessary? Benefits? Buying aftermarket rods everything else will be oe. What are some things to look for during the disassembly process of the engine? Detail...
|
6
|
onlyfreddie |
4,752 |
July 6th, 2015 - 11:23 AM Last post by: onlyfreddie |
![No New Posts](style_images/1/f_norm_no.gif) |
Blitz Access ecu for gen2 mr2 on st205Hi,i think have 3sgte blitz access ecu for gen2 mr2,not sure coz there is no any part number labels on it,only gold blitz label and this numbers - PC-23710T and # 47382Please may you help me to find o...
|
0
|
EdinR-DrugB |
2,780 |
July 3rd, 2015 - 11:24 AM Last post by: EdinR-DrugB |
![No New Posts](style_images/1/f_norm_no.gif) |
4agze ecu for 7afte?possibly a stupid question and if it was feasible it probably but what about using a 4agze supercharged mr2 ecu and wire harnesses as a solution for engine control on a low boost 7afte
|
1
|
shiro_uta183 |
3,192 |
June 30th, 2015 - 8:08 PM Last post by: Noahwhite2014 |
![No New Posts](style_images/1/f_norm_no.gif) |
Apexi avcr boost settingshey guys and girls I've got an apex I avcr boost controller what are the recommended boost settings at 0.9 bar ? Thanks
|
8
|
hotgt4 |
6,120 |
June 30th, 2015 - 12:43 PM Last post by: Nial |
![No New Posts](style_images/1/f_norm_no.gif) |
Compression test resultsSo i'm going through and fixing a few issues with my swap from years back and I ran through a compression test to see where the engine was at. BGB says 168PSI or more is normal, 124PSI is minimum...
Why the difference?
|
2
|
6G94celica |
2,915 |
June 26th, 2015 - 9:48 PM Last post by: Smaay |
![No new](style_images/1/f_hot_no.gif) |
What the TuckHey guys,So I decided to start tucking my engine bay. I didn't expect to go as far as I am now, but once I started hiding things, I wanted to hide more & more stuff. I'm not going to the e... 123» 5
Wire Tucking the RC
|
82
|
Defgeph |
42,711 |
June 11th, 2015 - 5:37 PM Last post by: Defgeph |
![No New Posts](style_images/1/f_norm_no.gif) |
Aftermarket exhaust manifoldHey 6gc Would this Aftermarket Manifold fit my celica gt4 St205 ? Or will this only fit the st185 model ? http://www.trademe.co.nz/Browse/Listing.aspx?id=883348204Thanks
Would this fit ?
|
11
|
hotgt4 |
5,139 |
June 9th, 2015 - 2:05 PM Last post by: hotgt4 |
![No New Posts](style_images/1/f_norm_no.gif) |
|
5
|
project_st |
4,407 |
June 2nd, 2015 - 10:34 AM Last post by: cardshark525 |
![No New Posts](style_images/1/f_norm_no.gif) |
Vacuum / Boost ManifoldHey guys. I have one of these. Has anyone fitted one to their car?Jhttp://www.full-race.com/store/accessories...oost-block.html
|
3
|
FunkySR |
3,990 |
May 29th, 2015 - 5:22 PM Last post by: CELL_PROTOTYPE_X |
![No New Posts](style_images/1/f_norm_no.gif) |
Assembling a 3rd Gen 3S-GTE EngineLets start with the block, freshly painted and honedHere are all the main components of the engine. This is after I removed them from the engine.Here are the old piston rings. Take one of them and bre...
|
11
|
Smaay |
6,920 |
May 27th, 2015 - 7:02 PM Last post by: doory100 |
![No New Posts](style_images/1/f_norm_no.gif) |
AN 10 fitting for turbo returnHey guys.I am in the process of turbocharging my UK Spec 3SGE. I have a spare sump pan (see pic) that I would like to drill for AN10 fitting.I have never used these fittings before. My question is can...
|
2
|
FunkySR |
3,429 |
May 26th, 2015 - 11:49 PM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
St205 Boost IssuesI bought a 94 Gt four wrc. It's has an aftermarket boost gauge and now that's I've owned the car for a while I'm learning and noticing something. I've read that in 1st and 2nd boos...
|
6
|
94gt4wrc |
4,544 |
May 21st, 2015 - 4:54 PM Last post by: antoine64 |
![No New Posts](style_images/1/f_norm_no.gif) |
High Intake Air TempAll stock ST205 except 2.5" exhaust and standalone ECU. The charge cooler is programmed to start at over 50% throttle or over 45C IAT.The intake temp starts at 5C and slowly rises to 50-55C. Outs...
50++
|
10
|
skogs |
4,672 |
May 4th, 2015 - 3:38 PM Last post by: Sunny |
![Closed](style_images/1/f_closed.gif) |
st205 stock exhaustI am currently running an aussie DP and Mongoose 2.5" exhaust, and i am really tired of the intense drone. I. Have a perfectly fine stock exhaust lyiing around, and with minor mods it can bolt st...
|
1
|
skogs |
4,717 |
April 23rd, 2015 - 10:10 PM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
CT20B Exhaust housing size?Hey guys im looking to get a turbo blanket for my car, but i am unsure of the exhaust housing size of the ct20b. I am not sure if its a t3, t3/t4(medium) or t4.
t3,t3/t4, or t4
|
1
|
4-eyed-freek |
3,306 |
April 22nd, 2015 - 11:36 AM Last post by: enderswift |
![No New Posts](style_images/1/f_norm_no.gif) |
5sfte with 2nd gen 3s injectors?I have a 95 GT and over the past 2 years ive acquired quite a few Things, enough to turbo the 5sfe.my question is, could i used 2nd gen 3sgte injectors to do this? I have the fuel rail and stock fpr a...
|
6
|
Arturio55 |
4,420 |
April 18th, 2015 - 3:01 PM Last post by: Arturio55 |
![No New Posts](style_images/1/f_norm_no.gif) |
My 5sfte Build. . . Almost There!I am finally getting close to finishing my 5sfte build. I started it in mid December a have all the parts in the car and working as of today. Here is what I started with. It was a stock 5sfe with a...
I am finishing up my 5sfte build. I have a few tuning issues. HELP
|
6
|
HardHead93 |
5,684 |
April 14th, 2015 - 11:59 PM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
7agte BP build ideasIve been kicking around the idea of going after a 7agte build. Using compression ratio calculator i wanted to find and stay at a low compression hence going turbo. I found with the stock 7afe's -1...
|
2
|
hdnseek |
3,033 |
April 12th, 2015 - 4:07 AM Last post by: Box |
![No New Posts](style_images/1/f_norm_no.gif) |
air in cooling system 3sgte 4th genHi there, I have a question, I've been getting pressure into my cooling system, I just finished doing a 5sgte swap with a 4th gen head. Before bolted the head on, I had a machine shop check for fl...
|
12
|
toy8490 |
6,545 |
April 10th, 2015 - 9:19 AM Last post by: toy8490 |
![No New Posts](style_images/1/f_norm_no.gif) |
|
10
|
Arturio55 |
6,364 |
April 5th, 2015 - 2:57 PM Last post by: Arturio55 |
![No New Posts](style_images/1/f_norm_no.gif) |
CT20 turbo overboostHow capable are these turbos at surviving pressure above 18psi. Ive heard "hot air" etc...but i have a water injection system....i can clamp the signal and tune beyond the 18psi fuel cut but...
|
10
|
Island_Racer |
5,869 |
March 29th, 2015 - 5:34 PM Last post by: lagos |
![No New Posts](style_images/1/f_norm_no.gif) |
Looking for cams for the 4th gen.I hear that GSC (iirc) 3rg gen cams will work AND the 4th gen cam sensor will bolt onto it without any issue. Is this true? Any experience with that?
|
2
|
x_itchy_b_x |
4,292 |
March 28th, 2015 - 10:38 AM Last post by: boostordie |
![No New Posts](style_images/1/f_norm_no.gif) |
Vacuum questionCan I pull vacuum from the throttle body for my blow off valve? I see two lines going to my charcoal canister, but am not sure if I can use those or not. The issue I'm having is that the tial valv...
Tial BOV fluttering
|
3
|
CELL_PROTOTYPE_X |
3,381 |
March 23rd, 2015 - 8:52 AM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
bov or turbo issues?i have a greddy type s on my 3rd gen 3sgte. when i first did the engine swap and add this bov the bov was pretty loud. it always used to make a high peak pshhhhhh!!!! no matter what wa...
|
5
|
diegohiga |
3,610 |
March 21st, 2015 - 11:47 AM Last post by: lagos |
![No New Posts](style_images/1/f_norm_no.gif) |
turbo beams?Hello all. I have a 97 celica st. Obviously I need to ditch the 7a. Last year I wanted to turbo the 7a and bought a bunch of parts. (Intercooler, mr2 turbo map sensor, blah blah) I soon acknowledged m...
to turbo or not to turbo? that is teh question
|
13
|
Arturio55 |
6,055 |
March 11th, 2015 - 9:43 PM Last post by: ricochet1490 |
![No New Posts](style_images/1/f_norm_no.gif) |
5sfe 2.2 turbo projectHey guys I am doing a 5sfe turbo project just for fun not lots of power. Now obviously the 5sfe ECU will not push enough fuel to feed turbo support. I was wondering, considering I am using a t26 turbo...
Budget fuel mapping
|
4
|
Cray89 |
4,835 |
March 11th, 2015 - 4:24 AM Last post by: 7afe_carina |
![No new](style_images/1/f_hot_no.gif) |
3sgte AWD ConversionI got a shipment in of all the parts I was missing to do the AWD Conversion on my ST. Now I am starting to put everything in with a lot of help from a friend of mine.Parts List 1Parts list 2Parts lis... 123» 8
Trying it anyway!
|
149
|
Green_MachToy |
143,250 |
March 7th, 2015 - 12:55 PM Last post by: DST94 |
![No new](style_images/1/f_hot_no.gif) |
fuel pump relay wiringok everyone says its easy but i cant get my fuel pump to turn on. Can someone please walk me through it and let me know where exactly you should put the relay and which wire should go where?? Im using... 12
going CRAZY!! please help
|
20
|
celicaGT96 |
17,051 |
February 16th, 2015 - 10:33 AM Last post by: Arturio55 |
![No New Posts](style_images/1/f_norm_no.gif) |
3SGTE engine swap GearBox questionHi guys. Lot more experience with 3sgte swaps over here I believe Mine went in, and initially was using a s54 box with SSI drive shafts. These got destroyed, the drive shaft box end had massive moveme...
|
14
|
digs |
7,778 |
February 12th, 2015 - 8:44 AM Last post by: Smaay |
![No new](style_images/1/f_hot_no.gif) |
Need help with vacuumCan anyone tell me where this goes and possible post real time pictures. At the moment I have a min air filter on it. The vacuum from this is so loud and I need to know either where it goes or if I sh... 12
Mystery pipe
|
20
|
Lil-Joe101 |
10,628 |
February 2nd, 2015 - 11:42 PM Last post by: Bitter |
![No New Posts](style_images/1/f_norm_no.gif) |
St205 CEL issuesOkay start off the car is a94 st205 jap import with light mods. now my issue is that the Check Engine Light is illuminating after a few minutes of driving the car but i believe it shouldn't be fl...
Random CEL Diagnostic not working
|
17
|
CDUB |
9,413 |
January 12th, 2015 - 5:13 PM Last post by: Jeebus |
![No New Posts](style_images/1/f_norm_no.gif) |
3rd gen 3S-GTE partsok so where can i get a new oil pump and water pump. and misc gaskets? i dont think this information is posted anywhere.perhaps we can start a database with part numbers and websites to get them.EDIT:...
|
3
|
Smaay |
3,566 |
January 10th, 2015 - 7:55 PM Last post by: Smaay |
|
|