| |
Topic Title |
Replies |
Topic Starter |
Views |
Last Action |
 |
GTFC's "What are these plugs" thread...people are gonna hate me after all this...i got my car out of the shop cuz they dont know what's going on. there's a lot of problems with the wiring and i want to get it narrowed down. let me...
Updated to Pics #2
|
58
|
gtfc115 |
49,129 |
October 15th, 2005 - 4:05 PM
Last post by: gtfc115 |
|
So close!So I finally get my clutch safety switch thing figured out, and then I find a loose wire that goes to my ignitor, so I solder that up then I give it another go. And nothing arrrrrrrrrrrrgggggggggggggg...
Anyone want to buy an unfinished 3s swap
|
21
|
Rjb23 |
21,574 |
October 14th, 2005 - 5:05 PM
Last post by: Rjb23 |
|
Ripp Mods SuperchargerAfter considering many options, and probably changing my mind at least 10 times, I have come to a final decision of getting the supercharger. It's expensive, but I think it will be just as nice as...
final decision
|
37
|
Jen |
29,719 |
October 14th, 2005 - 2:23 PM
Last post by: macavely |
 |
7afe/4age questionI have searched alot of the posts and still haven't found an answer yet--can you use the individual throttle bodie setup off of the 4ag on the 7afe if you can have someone weld the aluminium flang...
throttle bodies
|
12
|
dans_st |
4,062 |
October 13th, 2005 - 5:43 PM
Last post by: nik |
|
3sgte swapcan anybody tell what i need to swap a 3rd gen 3sgte for my st
3sgte swap for st
|
10
|
jman |
3,415 |
October 13th, 2005 - 9:14 AM
Last post by: Batman722 |
|
Turbo Specialties Extreme Turbo KitsI'm getting a loan for about 5,000 and I want to rebuild my engine and turbo my car, has anyone bought one of these kits and seen if it works alright?
Anyone have this?
|
19
|
d3monc3lica |
4,919 |
October 11th, 2005 - 11:34 AM
Last post by: d3monc3lica |
|
my post swap steering issuei thought id make a post about this, since a lot of people that know me, hear me bitching about this from day one.ever since my swap, my car would pull to one side anytime i would give it gas. im happ...
FIXED!
|
19
|
lagos |
4,349 |
October 11th, 2005 - 8:39 AM
Last post by: dustin15brown |
|
my progress of the swap.i have a few more to up load and ill plan on adding somemore tonight.now loading to the gunstig site...
few pics.
|
22
|
zipstrips |
21,667 |
October 11th, 2005 - 12:19 AM
Last post by: Dr_Tweak |
|
Wiring HelpI did the 3s swap and my car was an auto that I swaped to a manual and the car has power and all but will not crank. Has anyone done a 3sgte swap into a auto car before? What did you guys have to do t...
Lagos or Dr. Tweak
|
16
|
Rjb23 |
4,376 |
October 10th, 2005 - 10:07 PM
Last post by: Rjb23 |
|
Car Idleing problemWell after going down to the local drag strip at the weekend all the big names were there with there products so i got my self a baileys dump valve any ways i got back home last night and just had to...
|
2
|
Craig |
2,864 |
October 10th, 2005 - 8:50 AM
Last post by: Craig |
|
Jspecautosportshey i was just checking jspecs website and they show the 3sgte engine only having 204 hp i thought it was 251hp? Celica Turbo ST205 3S-GTE 94-99+ - Engine, 5-Speed AWD Transmission, ECU, Intercooler,...
3sgte
|
15
|
celica47 |
3,870 |
October 9th, 2005 - 9:39 PM
Last post by: lantz2121 |
|
turbo noob help!ok i got a question my friend is selling me a 14b from a dsm with the side mount intercooler and iwas thinking to turbocharge my celica 7afe . i search and notice that all the people that turbo...
14b????? t3????????
|
7
|
02bluerolla |
3,670 |
October 9th, 2005 - 1:35 PM
Last post by: 97sccelica |
|
What goes to these fuel lines?I think these are fuel lines, anyone with a 3s tell me what goes into this?Its bolted to the engine hook on the drivers side one end looks like it goes into the throttle body the other end I have no i...
Help!
|
25
|
Rjb23 |
25,327 |
October 9th, 2005 - 10:23 AM
Last post by: dustin15brown |
|
oil fitting where did you get yoursthe 2male ended pice, that go in to the block. For the oil feed to the turbo been looking for 1 for about 2 weeks, can you guys tell me where you got yours from???
5sfte guys
|
9
|
Punch |
4,305 |
October 8th, 2005 - 4:28 PM
Last post by: dans_st |
|
mr2 turbo transmission axlesalright ...i have done alot of search on the forums but they never really talk about ..what type of axles are being used with the mr2 turbo transmission ??.. plus the car has been sitting for 2 month...
make this clear for once...
|
25
|
st_celica_killer |
25,986 |
October 6th, 2005 - 9:03 PM
Last post by: Rjb23 |
|
fuel cuts off at 5PSI???ok so i made a new boost controller that works better and i got it to 6psi for the 1st time but some times around 4-5PSI it makes a funny thrthrthrthr sound and the car loses power. iam thinking its s...
|
4
|
StreetRacing10PSI |
3,976 |
October 6th, 2005 - 3:55 PM
Last post by: StreetRacing10PSI |
 |
FI FAQ turbo how tos swaps ectHere are some links to some of the most frequently asked questions here, most of these links are still open and postable in, lots with pictures, ect.enjoy!Completed Engine Swaps - Once youve comp...
READ THIS FIRST BEFORE POSTING
|
0
|
presure2 |
24,148 |
October 6th, 2005 - 7:57 AM
Last post by: presure2 |
|
TurboOk, i'm starting to do some research on turbo's because i want to turbo my 97 celica, and someone told me to get a alltrac turbo and exhaust manifold does it matter what year alltrac and does...
Which turbo?
|
1
|
celiracer |
4,092 |
October 6th, 2005 - 6:44 AM
Last post by: presure2 |
|
My setup 7AFTEWell, it was 2 years of planing parts gathering, different parts selling and buying new but now im finally finished.As for my setup here is the list of stuff i used:Turbo T3 garret 48/42Header - custo...
Picture and Videos added 2 page
|
40
|
doGGy |
47,515 |
October 5th, 2005 - 8:28 PM
Last post by: 02bluerolla |
|
turbo problem???ok, so my 7afte has been actin up latly and smokin a lil bit. i thought may b it was my head gasket cuz the smokes a lil white, but theirs no water mixed with the oil, thought may b i was runnin a lil...
|
2
|
StreetRacing10PSI |
3,497 |
October 5th, 2005 - 5:22 PM
Last post by: playr158 |
|
is this downpipe okay?DOWNPIPE ON EBAYI was just wondering if this downpipe would be okay to use for my 2nd gen 3sgte swap. I am swapping it into a 1997 5sfe celica. Its cheap looking, so I don't know what you guys h...
its cheap, but does it matter?
|
7
|
CelicaSTX02 |
4,172 |
October 5th, 2005 - 3:05 PM
Last post by: CelicaSTX02 |
|
boost limiterwow i didn't know that if you plug the second tube coming out of the waste gate of the ct26 your max boost is only 6 psi...well i didn't like that so i unpluged it so i could boost ten at stoc...
|
3
|
RUNNIN-LOW |
2,905 |
October 5th, 2005 - 12:27 PM
Last post by: RUNNIN-LOW |
|
5sfte: oil feedthe oil feed for the turbo what size fitting you guys use ??? & where did you get it???
what size fitting you guys use ???
|
12
|
Punch |
4,641 |
October 5th, 2005 - 11:25 AM
Last post by: Punch |
|
Safc 2I know the safc adjusts the fuel curve by tricking the ecu. But how does it repond to boost?If you have a boost controler, and you adjust it to zero boost will the safc still be dumping loads of fuel...
how it works?
|
1
|
Hanyo |
2,652 |
October 5th, 2005 - 6:03 AM
Last post by: presure2 |
|
Code 54 problem on the st205right peeps i think i might of sourced the problem out with my low boost just latley for the people that have not read my last thread here is a quick run down. first bought the car boost use to run a...
|
10
|
Craig |
9,109 |
October 5th, 2005 - 4:27 AM
Last post by: Craig |
|
CT26 turbo gaskethow much did you guys pay for your turbo gaskets turbo & downpipe??? & where did you get them...
where did you get yours???
|
9
|
Punch |
4,694 |
October 4th, 2005 - 11:21 PM
Last post by: Punch |
|
How much Psi??Just wondering what you guys think a turbo 4age (4agte?) would hold. I'm in the process of the 4age swap and am going to turbo it next summer. Interested in opinions!! Thanks!!!...
on a 4age
|
10
|
94silverst |
4,667 |
October 4th, 2005 - 4:32 PM
Last post by: soulshadow |
|
Waste gate probs?On the ct26 there are two vac pipes for the waste gate. the one that points to the turbo goes to the turbo and the on that points away gets capped off when on a 5sfte.When i cap mine off i cant boost...
ct26
|
9
|
urbandork |
4,264 |
October 4th, 2005 - 10:04 AM
Last post by: RUNNIN-LOW |
|
Wiring helpOk I have a few wires I don't know where they go to. 2 brown and 2 white with black stripes on the ecu side of the harness, they have matches on the other side but the colors and wires are exactly...
56k= instant death!
|
3
|
Rjb23 |
2,974 |
October 2nd, 2005 - 11:06 PM
Last post by: Dr_Tweak |
|
Turbo InstallIs it possible to install a turbo into a 00 Celica GT?Right now I dont have the money but I am looking for a good cost efficient way of getting a lot of power.
Is this possible?
|
4
|
kiryn |
3,833 |
October 2nd, 2005 - 5:54 PM
Last post by: Consynx |
|
Power Steering PumpDid anyone else have to remove their power steering pump to get their 3s to fit right?I had to remove mine because the pulley was hitting on my frame, I'm using the e153 tranny, the mr2 driversid...
|
14
|
Rjb23 |
6,487 |
October 1st, 2005 - 5:39 PM
Last post by: Rjb23 |
|
3S GZEwell i know this has been talked about before.. but it has been a while.. and just wondering if anyone has seen it done yet... or is planning on doing it soon.... if i lived in a perfect world my gt...
|
17
|
macavely |
6,844 |
September 30th, 2005 - 3:48 AM
Last post by: celi94 |
|
3sgte air filter on a 5sfe?my buddy is selling a blitz 3sgte air filter of his mr2 and i asked if it will bolt straight on a 5sfe.. he says if the AFM on the 3sgte is the same on the 5sfe, then it'll fit. can somebody conf...
will it work?
|
8
|
azian_advanced |
4,483 |
September 29th, 2005 - 10:51 PM
Last post by: azian_advanced |
|
Max horsepower for ST with CT-26i was "feeling" around on trd94cel's blue ST. he has the CT-26 turbo in it. i was wondering how much horsepower would that put out. and i was thinking also, i can swap my GT engine into...
just wondering
|
11
|
kman2010 |
6,200 |
September 29th, 2005 - 10:38 AM
Last post by: nik |
|
Sticky ActuatorRight guys ive got abit of a problem now and then the car will on produce half of the boost it should be runining at so wot i mean is it should run 1.2bar but over time this as gone down and down now...
|
7
|
Craig |
4,734 |
September 29th, 2005 - 8:41 AM
Last post by: Craig |
|
Swap Wiring Infoin an effort to help clear up the mystery about wring for the swap, i decided to start this thread. i plan to post any info that i find during my reaserch and would like to see the rest of you do the...   12
|
106
|
lagos |
91,129 |
September 28th, 2005 - 12:23 AM
Last post by: lagos |
|
big turbo problemalright my car is smoking like crazy.....its the white turbo smoke..what do you guys think is the problem....im so stressed out about my babe!!!!well let me know if anybody has a clue....
help me out
|
22
|
RUNNIN-LOW |
26,014 |
September 27th, 2005 - 5:09 PM
Last post by: zipstrips |
|
Nitrousfrist question .. is nirtous considred forced induction .. ? second qustions.. do you think the 5s could handle a 70 shot ..i think it can but want to hear other peoples thoughts on it ..
|
21
|
macavely |
23,496 |
September 27th, 2005 - 1:06 PM
Last post by: 94ST2 |
|
|
6
|
ST205RR |
3,547 |
September 27th, 2005 - 11:00 AM
Last post by: Craig |
|
Timing on JDM 3sHey guys I'm replacing the timing belt, and according to the manual when the hole in the crank pully is at 0 the marks on the cam shaft pulleys should be at the 12 o clock position. But the book I...
|
9
|
Rjb23 |
4,178 |
September 26th, 2005 - 5:51 PM
Last post by: Rjb23 |
|
Removing broken boltOk this really isn't for this forum, but it has to do with my 3sgte so if the mods wanna move it go ahead.Anyway the people that were messing up my car for cash, broke a pressure plate bolt in the...
|
11
|
Rjb23 |
4,926 |
September 25th, 2005 - 3:43 PM
Last post by: Rjb23 |
|
ct-26i bought a ct-26 turbo and parts but i want to know if my st can handle it at 9 psi at most? and want to know what auto boost controller i can use for the combo (st and ct26?)
turbo
|
3
|
yungazzdriver |
3,104 |
September 24th, 2005 - 9:58 AM
Last post by: Punch |
|
3sgte gasket setOk well I am going to replace all gaskets on my 3s before I finally install it. im not worried about a stronger headgasket for now the stock will be fine because I have a budget on this project.Ebay G...
EBAY! vs. other options
|
15
|
celicast3sgte |
4,647 |
September 24th, 2005 - 9:43 AM
Last post by: Punch |
|
|
22
|
97lestyousay |
21,014 |
September 23rd, 2005 - 8:43 PM
Last post by: 97lestyousay |
|
which blow-off valve?I was just curious which blow-off valve is good for the 3sgte engine? I've been hearing the HKS SSQV is the better of them but i want to hear from you guys?
|
18
|
team_omega |
5,671 |
September 23rd, 2005 - 5:40 PM
Last post by: shin |
|
What are these wires for? (3SGTE swap)ok so my 3sgte swap is SO close to being finished. i just need to know what a few wires are for. sorry for the bad pics, all i had was my phone.this first one is back next to the firewall, it comes o...
|
8
|
gtfc115 |
3,715 |
September 23rd, 2005 - 11:40 AM
Last post by: gtfc115 |
|
map sensor??????I don't know if anyone has asked this yet...But can I use a 2-bar 3SGTE map sensor on my 7AFTE, I have heard of HONDA guys that I know of using 1.2-2.0bar map sensors off of other vehicles on thie...
boost sensor swap
|
12
|
dans_st |
8,418 |
September 23rd, 2005 - 8:32 AM
Last post by: WannabeGT4 |
|
|
10
|
playr158 |
4,980 |
September 23rd, 2005 - 4:32 AM
Last post by: forkee |
|
3sgtedoes the 6 speed tranny from a celica gts match up with the 3rd gen 3sgte engine?
tranny
|
3
|
BLACKcelicaGT |
3,579 |
September 22nd, 2005 - 9:36 PM
Last post by: lagos |
|
Another 3sgte swap *PICS* threadlook how dirty she isfinishing up some wiring (in my other thread) and maybe some tranny issues and she'll be ready to fire up.Greddy FCD, Fidanza flywheel, ACT stg 2 Clutch, fmic, hks ssqv, safc...
90% finito
|
3
|
gtfc115 |
3,478 |
September 21st, 2005 - 7:14 PM
Last post by: lagos |
|
|
|
Forced Induction
« < 67 68 69 70 >
New Replies
Hot Topic (New)
Poll (New)
Poll (No New)
Moved Topic