![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Aug 8, '09 From Fiji Currently Offline Reputation: 0 (0%) ![]() |
Hello there friends.
![]() ![]() ![]() ![]() ![]() ![]() ![]() Then came time for it get a new paint job a few weeks after i bought it(also had to change one of the high beams coz it had a hole in it and a low beam too that had broken brackets): ![]() ![]() This was all that had been done to the celi till the last year of high school(2009) when i seeked help on this site(Thanks Rusty for the information)on changing the timing belt.Also got in some mild TODA race cams during the process that my brother brought from some place: ![]() ![]() ![]() The first exterior mod i got was a pair of JDM tails and the interior mods were that of a pair of 6.5' ministry of sound door speakers,a Kenwood head unit.V12 1400 watts amplifier and 2x 10' Bomber woofers: ![]() ![]() ![]() Then came the Fujitsubo Giken exhaust with a full 2.5' pipe conversion from front to back with a single 2.5' resonator(later added a 2 inch resonator too to save on fuel and to reduce ricer noise ![]() ![]() ![]() ![]() Got the rear suspension changed(was too stiff) with OEM ones,changed front stabilizer links and the had brakes serviced: ![]() ![]() ![]() With the mechanical and suspension taken care of,time for some more exterior and interior mods ![]() ![]() ![]() ![]() ![]() ![]() I had a cousin do some leather into the interior seats and door panel too ![]() ![]() ![]() ![]() The 2.0' resonator to kill sound,improve low end torque and save on fuel: ![]() ![]() The car as it is today with all the information i gathered from this site.Believe me people this is celica heaven,filled with a whole lot of information.Thanks a lot buddies,all this would not have been possible without your input.I'm looking forward to a V6 turbo(3VZ-FTE probably)swap in the future.Input on it will be highly appreciated =].For now,here's pics i took yesterday,Enjoy ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() This post has been edited by kavy: Sep 10, 2010 - 5:09 PM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Nov 18, '08 From Idaho Currently Offline Reputation: 1 (100%) ![]() |
jeeze man! Loving the interior! you're car looks amazing. that paint job is so trippy!
This post has been edited by mmmchocolate: Sep 5, 2010 - 11:43 PM -------------------- A work in (extremely slow) progress
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
I'm liking that interior. That shifter cover is something I've never seen before though.. it's weird to me lol. At least it's an auto and doesn't get in the way too much.
-------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
![]() Enthusiast ![]() Joined Aug 8, '09 From Fiji Currently Offline Reputation: 0 (0%) ![]() |
![]() thanks buddy,pity the painter passed away few months after he did it ![]() its SUPER RED IV paint.Got it done for real cheap.The entire car,inside and out(except engine bay) with rust guard type of thing that hardens into black tar stuff on the underside for $900!!! ![]() Thanks Hector(first time i saw one and went like "Auto Underwear!!!" ![]() yerp,it doesn't get in the way ![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Nov 5, '07 From New Zealand Currently Offline Reputation: 3 (100%) ![]() |
a very nice project thread you have here
-------------------- |
![]() |
|
![]() Enthusiast ![]() Joined Aug 8, '09 From Fiji Currently Offline Reputation: 0 (0%) ![]() |
![]() thanks rusty.now that the interior and exterior has been finished,i'm looking for the 3VZ swap thread.i remember some guy making a post about it here.can't seem to get the exact topic though...wonder if it the person got through with it alright..anyway,thanks guys ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) ![]() |
nice progress! loving the interior! Just need a manual conversion and your all set
![]() -------------------- |
![]() |
|
![]() Enthusiast ![]() Joined Aug 8, '09 From Fiji Currently Offline Reputation: 0 (0%) ![]() |
lol @ "nice progress! loving the interior! Just need a manual conversion and your all set
![]() in time to come ![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) ![]() |
Everything looks good. Keep it up. You can pick up a 3VZ-FE cheap. They came in many different Toyota models so they are easy to find and parts are easy to get. Stephen_Lee is doing a 3VZ swap right now, if you look in the Engine/Mechanical section of the site.
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
![]() 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() Joined Apr 11, '09 Currently Offline Reputation: 11 (100%) ![]() |
now that sir is one of a kind celica
|
![]() |
|
![]() Enthusiast ![]() Joined Aug 8, '09 From Fiji Currently Offline Reputation: 0 (0%) ![]() |
Thanks for the pointer richee3
![]() Thanks zfjohnson07 ![]() This post has been edited by kavy: Feb 13, 2011 - 8:26 PM |
![]() |
|
![]() Enthusiast ![]() Joined Aug 8, '09 From Fiji Currently Offline Reputation: 0 (0%) ![]() |
Went for a trip to Australia,got back a few goodies for the celica =D
![]() And to save on fuel (prices shot up to $2.37 a liter of 91 octane unleaded X_X) plus to add on some power(i'm not exaggerating by saying it adds power throughout the rpm range like never felt before), a MSD6A with a Tach adapter PN.8910-EIS : ![]() Also added a Direct Power System Version 2 by Exceed and Trusty which i managed to get locally. Gives a noticeable difference nonetheless.Not too much though, but the car does feel a bit quicker. Now I'm looking to do some work on the ACIS engage point as mentioned in the ACIS/BEAMS discussion but before all that,i'm bummed as to why there is a few hp difference between a manual transmission 3rd gen 3S-GE and one with a automatic transmission.I've read in this forum that the intake cams differ but shouldn't that affect the compression of the motor???For all i know,regardless of the transmission,the compression is the same...Anyone to shed some light on this?? This post has been edited by kavy: Feb 13, 2011 - 8:13 PM |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Nov 5, '07 From New Zealand Currently Offline Reputation: 3 (100%) ![]() |
3. Gen 3S-GE A/T
In: 240deg, 8.7mm lift (timing 7/53) Valve diameter: 33.5mm Ex: 240deg, 8.2mm lift (timing 53/7) Valve diameter: 29.0mm 3. Gen 3S-GE M/T In: 252deg, 9.8mm lift (timing 7/65) Valve diameter: 33.5mm Ex: 240deg, 8.2mm lift (timing 53/7) Valve diameter: 29.0mm Compression ratio (10.3 : 1) is still the same, my guess is different ECU tune. -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) ![]() |
Hey dude,
I'm interested in the MSD ignition system, how much does it cost, was it easy to install? Oh by the way you should be using a higher octane than 91 with a 3S-GE -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) ![]() |
-------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
![]() |
|
![]() Enthusiast ![]() Joined Aug 8, '09 From Fiji Currently Offline Reputation: 0 (0%) ![]() |
3. Gen 3S-GE A/T In: 240deg, 8.7mm lift (timing 7/53) Valve diameter: 33.5mm Ex: 240deg, 8.2mm lift (timing 53/7) Valve diameter: 29.0mm 3. Gen 3S-GE M/T In: 252deg, 9.8mm lift (timing 7/65) Valve diameter: 33.5mm Ex: 240deg, 8.2mm lift (timing 53/7) Valve diameter: 29.0mm Compression ratio (10.3 : 1) is still the same, my guess is different ECU tune. Thanks Rusty ![]() Anyone else think otherwise though??? Hey dude, I'm interested in the MSD ignition system, how much does it cost, was it easy to install? Oh by the way you should be using a higher octane than 91 with a 3S-GE The ignition system all together cost me $318AUD shipped to Ausi of-course.Got it off performanceonline.com though e-bay Yup,octane booster during fillups =] ROFL!!!Jeez!!!now that's a downer..lol.Mine's a different one from what's in the link.I got mine as F.O.C anyways ![]() But the car does feel a bit quicker(maybe its after installing the MSD where it aids in current flow or sumthing..idk,not a physics genius ![]() Here's a pic of it though: ![]() =] |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jun 2, '10 From Davenport, Florida Currently Offline Reputation: 0 (0%) ![]() |
nice ride
![]() -------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
im so jealous of your red colored celica. I wish mine was red!!
![]() -------------------- For Sale Items:
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Aug 5, '06 From San Luis AZ Currently Offline Reputation: 4 (100%) ![]() |
that meguiars stuff does wonders
![]() you are missing engine pictures,, would like to see what has been done to the heart of the beast nice ride bro -------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() Joined Aug 8, '09 From Fiji Currently Offline Reputation: 0 (0%) ![]() |
nice ride ![]() Thanks buddy =] im so jealous of your red colored celica. I wish mine was red!! ![]() Hehe.Next paintjob?? =] that meguiars stuff does wonders ![]() you are missing engine pictures,, would like to see what has been done to the heart of the beast nice ride bro Ah,it sure does.A few years back, right after the paintjob on the car(im guessing one of my fellow school students had a hand),the car had scratches(not too deep though.PHEW!) from what looked like someone had dragged a bag or something from the front drivers side of the vehicle all the way to the rear tail lights ![]() ![]() Hehe,i knew someone would ask. Will do so right after i do a little tidying up in the engine bay(not to mention all that greasy,dusty dirt that doesn't come off just by wiping..grr...lol). Thanks bro =] |
![]() ![]() |
Lo-Fi Version | Time is now: August 18th, 2024 - 11:08 PM |