![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) ![]() |
Thought about a progress thread for a while, but i should have started when i first got it, but i'll try my best to show most stuff anyway.
October 10, 2009. My 19th birthday. I woke up real bright and early, birthday morning, to drive 2 hours to sydney to look at a celica. Horrible condition, and i was dissapointed. Young P platers car which wasnt looked after at all. they knew i was coming early that morning, car was filthy, tail light broke, sh*t everywhere in the car, you could tell its been mistreated. The trek home was quite a sad one, i thought hey, a car for my birthday would have been sweet (even though i was paying haha). Once home, stopped by another for sale which was advirtised on ebay, and picked her up. Talked them down near $4000 off the price, so was a fair deal. Heres the first pics i took. ![]() ![]() ![]() 200k km's on the clock, but previously owned by only 2 older lady drivers, so i'd say its never hit 100, ![]() The first mod i chose to do was to remove those horrid hubcaps, and get wheels and 15% Tint. 17" CSA race rims, 205/45r/17 Tyres. ![]() At the same time i painted my calipers red. ![]() Around the same time as my wheels, i installed my sound system. I don't have a pic on here atm, but can get some if requested. Pioneer 3100 Headunit, 2x 6.5" Kicker Splits, 350w 2ch Kicker amp, 800w Slimline Kicker 12" Sub. The stupid spare wheel required me to either get a slimline, or make a new floor or remove the tyre, so i went the slimline, its decent enough for my liking atm. The next 'Mod' to my memory would be the Crystal clear side indicators, with silver bulbs. ![]() Followed by wolfies clear front indicators, and a cheap Mesh grill. ![]() Than through months of searching, looking for good deals, i found a set of JDM Tails. ![]() Removed the inner orange lens. ![]() A few months of saving, and contemplation of which suspension line i should go down, i finally chose a set of BC BR Racing Coilovers. 30 way adjustable damping, camber adjustable top mounts. ![]() It sat like this for a while, untill my slow ebay addiction kicked in, and i picked up a universal rubber lip. ![]() It didnt serve much purpose, nor did i try and cut it properly. It was a unique look, so i thought what the hell. When i took it off, there were scrape marks UNDERNEATH the lip, which was strange. Silly low cars. Than next, came one of the best additions.... the 6GC Sticker! Lovin it. ![]() Next came Projectors. Spent the day learning how to remove the front bumper for the first time, and wiring them up ![]() ![]() Whilst installing the projectors i picked up a SAAS pod filter and aluminium pipe. Pics upon request, bit of a qhetto setup though, haha. This is how she sat for a few months. I finnally got sick of the sucked in look in the wheels, and decided on some Spacers JJR 20mm in the fronts, and 25mm in the back Before ![]() After ![]() To make the spacers fit, i had to grind off say, 2mm off the studs, which i thought was an acceptable amount. First time with an angle grinder though..was an experience haha. I DO scrape a little when taking corners too fast, or have a car full. The rears are only JUST touching, so i shall get them rolled soon. For quite a while, i had liked the look of the euro splitters. One day i found a decent conditioned set, and got them shipped right away. A week of them being in my possession, painted and installed. ![]() A week later, my OEM sides arrived, also quickly followed by paint and installation ![]() ![]() And this is pretty much where it is currently at. I have a set of rear SS-III splitters to be painted in the next weeks and installed, but apart from that, i'm fair content. Continuously looking out for a few goodies that i may purchase, JDM sills, rear oem seat covers, new wheels ![]() But appart from that, im happy atm, and will now start looking into Headers/Exhaust/Performance mods. Heres a couple more pics for the lols. ![]() ![]() Hard to tell, but i added little key hole plugs ![]() ![]() ![]() P.s. As you can see my camera quality/skills have also progressed ![]() Cheers This post has been edited by Timmyface: Dec 22, 2015 - 5:16 AM -------------------- |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Feb 2, '06 Currently Offline Reputation: 3 (100%) ![]() |
Very simple and clean look but it looks AMAZING!!!
This post has been edited by NGHTKD: Jul 5, 2011 - 8:19 AM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) ![]() |
Camera skill progression > car mod progression.
![]() -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Oct 20, '08 From Seattle, WA Currently Offline Reputation: 5 (100%) ![]() |
Your car looks awesome! Love your choice of mods with the red.
-------------------- 2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Nov 29, '10 From Lake Havasu City, AZ Currently Offline Reputation: 31 (100%) ![]() |
Your car is now my favorite one here
![]() -------------------- ![]() 6gcHeroes:808hectortimmybatmandiegotigamak |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Mar 8, '09 From Westport, MA Currently Offline Reputation: 6 (100%) ![]() |
sexxxyyy
dude great progress with this car. -------------------- st205 powered ss3 coupe
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) ![]() |
Thanks guys
![]() The weather hast been the best atm, so the painting of my rear SS-III splitters are on hold. So i embarked on another project. My custom boot install. Here is how i was currently set up, minus the wires showing. ![]() And the main reason for doing is this, was because the spare tire sticking up was reallly bugging me. ![]() So i took out my carpet, and traced that onto my Particle board. After a few minor adjustments, i came up with this: ![]() The hole on the right is for my amp to sit in. The way i wanted my boot to look, was to have my sub laying down, and not vertical. The only way i could achieve this with my current sub was to lean it against the tyre and the seats, meaning there would need to be a hole for the sub to rest in. This is the result. ![]() I than added supports underneath to level out the new floor, and everything went together nicely. I than cut a second piece of MDF to sit over the sub to make it all flush, ill post other pics tomorrow, but this is how it is atm. ![]() Everything is sitting good, although since my sub isnt sitting ON the new floor, the floor is jumping when i go over bumps. So any pointers on a way to weigh it down or secure it would be great ![]() I'll be wrapping the floor tomorrow and show the finished product. -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) ![]() |
So heres my first attempt and wrapping with vinyl.
Might do a better job another day, but it looks okay for the moment ![]() ![]() ![]() -------------------- |
![]() |
|
Enthusiast ![]() Joined Feb 25, '10 From in A land Far Away Currently Offline Reputation: 0 (0%) ![]() |
Cracking effort there mate, top job......
|
![]() |
|
Enthusiast Joined Feb 6, '10 From mansfield, notts, uk Currently Offline Reputation: 0 (0%) ![]() |
looks awesome mate. so different to how it started!
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) ![]() |
Finally got some good weather, so operation Paint/Install rear splitters were a go.
![]() ![]() ![]() Came out really well. Had to modify them a bit to fit correctly, but was all simple stuff. Now to decide if i want to go SS-III on the front aswell. Hmm. -------------------- |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 18, '09 From Orlando Currently Offline Reputation: 8 (100%) ![]() |
Oh wow. I'm totally de-spoilering mine. Looks gorgeous.
-------------------- '97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
stop doing this too me. I hate you guys now I'm so jealous, so many progress threads with red celica's. The red on the celica is just drop dead gorgeous. I want my celica painted just like yours!!!!! very nice celica. I'm liking it a lot, it looks a bit better than manphibian's celica. I think it could be the shade of red that's a tad different, but I just can't put my finger on it.
![]() naw stay with your current front bumper and euro splitters they look awesome! This post has been edited by BonzaiCelica: Mar 3, 2011 - 2:37 AM -------------------- For Sale Items:
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) ![]() |
Haha, thanks bonzai. I've always loved manphibians car when i first got mine
![]() I am liking the euro splitters too, the only downfall is the difference between them and the skirts and splitters. SS-III would flow better..but.. >< I don't know anymore. And spoilerless all the way (Y) -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Oct 20, '08 From Seattle, WA Currently Offline Reputation: 5 (100%) ![]() |
I like spoilerless on some cars and on some I don't. I really like it on yours though. I Think your car would look AMAZING with ss-III splitters in the front.
edit: Oh yeah, looking at it again the second pic with ss-III front splitters would be soooooo awesome. This post has been edited by mak5603: Mar 3, 2011 - 2:53 AM -------------------- 2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) ![]() |
>< It sucks that i'm a very easily convinced type of guy. The smallest compliment can change my mind in an instant.
I have been contemplating it for QUITE a long time, as the only photos i have seen are from terbeau and recently suprakid, which have looked pretty good. Undoubtedly, someone will say the right words and put me into the buying mindset to get them ![]() -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) ![]() |
Haven't updated this in a while.
A while ago a re-routed my intake system. I'll try get some photo's but i have recently fractured my knee-cap ![]() Basically with the intake, i have a flexi pipe running inside the stock airbox, into the fender where the pod filter is. Looks stock, but not ![]() Recently i have: Got 2 new front tyres. Toyo Teo+'s. ![]() Changed my guages and clock to Blue - Although not 100% happy, i may go with Spree's LED's. ![]() ![]() My k's are starting to tick up ![]() ![]() Installed a 2 1/4" Catback exhaust system. ![]() ![]() Purchased a 6000k HID Kit which is on its way. Currently need 2 new rear wheel bearings ![]() Aaaaannnnddd, a little edit i done ![]() ![]() -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
Your car is one of the cleanest cars on this site
![]() -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) ![]() |
F*cking hot dude! I love every mod on that car!!!
-------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Nov 18, '08 From Idaho Currently Offline Reputation: 1 (100%) ![]() |
Thought about getting ss-III splitters in the front anymore?
-------------------- A work in (extremely slow) progress
|
![]() ![]() |
Lo-Fi Version | Time is now: August 22nd, 2024 - 8:23 PM |