![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Nov 5, '07 From New Zealand Currently Offline Reputation: 3 (100%) ![]() |
Sounds like you're splitting hairs 0.8PS (Pferdestärke) is 0.8HP or 0.588kw. Also 15-11=8.82 just stick to 1 form of measurement
Did you ever get your Celica dyno'd Bonzai to see what your base power is and go from there? So you know roughly what your gains are when you do buy & install some parts for your beams. When I installed the Tom's ecu I got a print out of the O2 readings from the exhaust. No since we have never had some sort of smog checking, I can't really compare my results to others locally. Would be interesting to compare - if it is comparable, to people in the States -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
Nope. I don't plan to do any dyno unless it's real cheap. And adding other engine parts isn't realistic. Got other plans. I was just putting the info so people know what to expect. With a full system.
Oh yea sorry. I just fixed that post This post has been edited by BonzaiCelica: Feb 10, 2016 - 2:28 PM -------------------- For Sale Items:
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
Not a new product or anything. But companies like technotoytuning and battle garage offer individual throttle body set up for beams motors that's actually compatible with 4age blacktop. Im just not sure if a whole kit is bolt on per say.
-------------------- For Sale Items:
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
Camshafts for 3SGE ACIS and Beams Redtop. someone from south africa told me it was $1200 + shipping, but came with springs and retainers.
http://www.catcams.com/engines/engine-sele...Manufacturer=26 Dry Sump Oil Pan for 5sfe and 3sge = $600 http://www.mr2.com/forums/threads/94399-dr...e-3sgte-as-well Wossner High Compression Pistons 12:4.1 = $1200. they have a branch here in Southern California.... https://www.ebay.com/itm/WOSSNER-FORGED-PIS...v-/140508110953 3SGE Beams ITB adapter plate $285, the problem is that i dont think straight trumpets will work. i think they have to be slightly angled @ 60 degrees to clear firewall..... https://xcessivemanufacturing.com/toyota/by...ge-itba-s1.html This post has been edited by BonzaiCelica: Nov 25, 2017 - 7:16 PM -------------------- For Sale Items:
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
updates on performance parts for 3SGE
This post has been edited by BonzaiCelica: Nov 25, 2017 - 7:11 PM -------------------- For Sale Items:
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
bump. for tuning parts....
-------------------- For Sale Items:
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
The camshafts that can be used while still retaining VVT-i are these.....
http://www.catcams.com/products/camshafts/...AMSETUP_id=2410 Please note that you have to check the lower valve seat if the lift is more then 11.2 mm Also check the clearance between the valve seal and the retainer like mentioned on the data sheet. You also have to change the springs and retainers to use this cams. -------------------- For Sale Items:
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
ok so i gathered some info from the beams redtop forums. all prices are American Dollars. Custom Independent Throttle Body Adapter Offered in 45mm, 48mm, and 50mm Made by TRD ![]() ![]() [color="#FF0000"][size=2] Pistons, Size = 86mm, 86.5mm, and 87mm Compression Ratio = 12.8:1 can be ran best with 98 RON = 93 Octane Fuel or 13.8:1 can be ran best at 100 RON = 94 octane Fuel Rings Included Wrist Pins Included ![]() [u]Rod and Rod Bolts $1236.90 8mm longer than Standard Rods Rod Ratio = 1.7 ARP Rod Bolts included ![]() Set of 4 Inlet Billet Cam $1030.75, Cams $412.30 Lift = 13mm Duration - 257 Intake Cam is VVT-I enabled ![]() Valve Springs $618.45 ![]() so Celica RA45 over in Australia is still making these parts to order for the redtop motor. head over to beams owners group forum on mr2 board if your interested This post has been edited by BonzaiCelica: Dec 15, 2022 - 12:32 PM -------------------- For Sale Items:
|
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Nov 5, '07 From New Zealand Currently Offline Reputation: 3 (100%) ![]() |
While over the ditch, NZ make these custom ones...
They can do 45mm, 48mm or 50mm ![]() ![]() Not sure on price. But gen 3 owners could use their lower intake runners, and possibly a small adaptor bracket between that and the itb's -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
I think this is a 120 degree angle, but only because it was fitted into a newer corolla that originally had an 1ZZ motor. While the one you picture looks like a 90 degree bend.
![]() ![]() ![]() ![]() pics of how cat cams come in the mail ![]() This post has been edited by BonzaiCelica: Dec 15, 2022 - 1:22 PM -------------------- For Sale Items:
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
Valve Clearance Spec for 3SGE Beams Redtop
Intake .17-27mm Exhaust: .32-.42mm upgrading your transaxle to the 1994-1995 E56 trans gearing and swapping out final drives from the 96-2000 RAV4: Increase in torque from 4.176 - 4.529 is 9.24%. Increase in torque from 4.176 - 4.933 is 18.14% Which means a 4.933 final drive in your E56 transaxle will gain 27 ft lb torque + 152 ft lb (engine torque) = 179 ft lb tq more details here in this video: https://www.youtube.com/watch?v=kb3F5238fco This post has been edited by BonzaiCelica: May 15, 2023 - 1:01 PM -------------------- For Sale Items:
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
MAF intake adapter
https://www.driftmotion.com/2JZGTE-VVTi-MAF...pe-p/dm3584.htm Manifold flange with enlarged exhaust ports for those that plan on doing proper cylinder headwork https://www.sq-engineering.com/product/3sge...1QQm4nx2w817u3o 3sge Beams motors have an intake manifold thermal spacer. something that is not found on Honda's B18C or K20A motors. Furthermore the Beams has an improved PCV system over gen 3 design. This allow crankcase pressure to remain much lower and not push as much oil out the valve cover. These improvements were carried over to the 4th gen 3SG-TE platform despite better PCV system. blow by still occurs and oil puddles inside the intake manifold. Would recommend an catch can set up. This post has been edited by BonzaiCelica: Sep 5, 2024 - 6:30 PM -------------------- For Sale Items:
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
someone is detailing the conversion of Altezza motor into a FWD setup. This was documented on the mr2 beams subforum while back ago but that site isnt functioning properly even though you can see the info in plain format.
I was told 70-72mm throttle body is a great addition to a set of more aggressive cams. however i have not seen any dyno graphs to confirm this. https://midshiprunabout.org/mk2/writeup-rwd...-or-vice-versa/ interested fact that the Caldina Greytop (auto spec only) was produced until 2002 This post has been edited by BonzaiCelica: Sep 5, 2024 - 6:29 PM -------------------- For Sale Items:
|
![]() ![]() |
Lo-Fi Version | Time is now: September 11th, 2024 - 3:05 PM |