|
Topic Title |
Replies |
Topic Starter |
Views |
Last Action |
Important Topics |
![No new](style_images/1/f_hot_no.gif) |
Sticky: The OFFICIAL 6GC FI Dyno chartsOk Guys, here it is, the official 6gc FI dyno registry.just to be clear, DO NOT post your "estimates" or guesses. this is for dynosheets, and runfiles if you have them. DO NOT POST UNLESS YO... 123
PLEASE post yours!
|
41
|
presure2 |
566,720 |
April 26th, 2014 - 9:42 AM Last post by: Hafkai |
![Closed](style_images/1/f_closed.gif) |
Sticky: The Forced Induction Thread. (turbo, supercharger, nitrous)The Forced Induction thread.(Also see The NA performance & Engine and transmissions maintenance thread.)Turbo Introduction Information about Turbo systems. Covering: Basic, Advanced & Expert....
Check this thread for great information first.
|
0
|
Rusty |
38,742 |
February 4th, 2011 - 9:32 PM Last post by: Rusty |
![Closed](style_images/1/f_closed.gif) |
Sticky: ALL MEMBERS PLEASE READI have noticed lately that people are not using the "Report this post" button as it was intended.If you see a post you feel is disrespectful, or not on topic, or ANY reason you feel it viola...
Please use the "Report this post" button
|
0
|
presure2 |
69,335 |
February 17th, 2008 - 9:26 AM Last post by: presure2 |
Forum Topics |
![No New Posts](style_images/1/f_norm_no.gif) |
|
3
|
empite |
3,825 |
June 23rd, 2023 - 3:15 PM Last post by: Sicilian_Celica |
![No New Posts](style_images/1/f_norm_no.gif) |
3sgte HelpBought a 96 GT with an incomplete 3SGTE swap and am having trouble determining the generation. Best way/place to find that information?
Need accurate way to determine generation
|
1
|
xRaveNx |
58,318 |
July 27th, 2022 - 10:45 PM Last post by: slavie |
![No new](style_images/1/f_hot_no.gif) |
7A-FTE made in GermanyHi, after over a year of gathering parts my Celica finally is in the garage and gets her custom header, exhaust and some other stuff.Yesterday we fitted the big Evo9 intercooler, i had to get the ST20... 123» 9
|
167
|
Hafkai |
270,070 |
June 19th, 2022 - 6:02 PM Last post by: madk4speed |
![No New Posts](style_images/1/f_norm_no.gif) |
JDM 3rd Gen 3SGTE Closed Loop Lean Misfire / Poor IdleAbout 6-8 months ago, I installed an EBC solenoid for the already-wired in Greddy ProFec B Spec II in my ST205 front clip conversion (JDM 3SGTE, 3rd Gen, stock ECU) 1996 GT. During the week I had it...
Engine Goes to Closed Loop EFI, it Coughs, Stumbles, and Misfires
|
7
|
J3rkyBoy |
17,600 |
March 1st, 2021 - 11:22 PM Last post by: slavie |
![No New Posts](style_images/1/f_norm_no.gif) |
3sgte swap on fwdHi. I wanted to do engine swap on my st202 and I've tried to gather a lot information about it all around the internet and only got lots of inaccurate and uncertain information about it. The stuff...
Title says it all
|
5
|
ZarkMuckerberk |
14,551 |
February 12th, 2021 - 4:12 PM Last post by: block |
![No new](style_images/1/f_hot_no.gif) |
MS3PRO EVO on 4th Gen 3sgteI just got my MS3PRO EVO in for my conversion to standalone on my 4th gen 3sgte. I am planning on taking my time with this install to make sure all the wiring is correct and clean looking. To help w... 1234
|
66
|
HardHead93 |
110,968 |
November 28th, 2020 - 7:25 AM Last post by: Lindsley |
![No New Posts](style_images/1/f_norm_no.gif) |
7afe Hybrid BuildLooking into turbocharging my 7afe ST, performance parts are rare for this engine so I need to get creative with my build. I plan on running a B16 header with a 7afe flange, MaxSpeedingRods forged con...
|
3
|
SaulGoodman |
29,685 |
October 1st, 2020 - 3:18 AM Last post by: BonzaiCelica |
![No New Posts](style_images/1/f_norm_no.gif) |
|
4
|
EdinR-DrugB |
13,095 |
April 16th, 2020 - 10:48 PM Last post by: EdinR-DrugB |
![No New Posts](style_images/1/f_norm_no.gif) |
3sgte swapI’ve recently decided it would be in my best interest for what I’m wanting is to swap the 5s out. Luckily I’ll get a little more life out of it so I can take my time and build the new motor. (Sweethea...
Just got one question.
|
8
|
Jakest2 |
15,527 |
March 8th, 2020 - 4:45 PM Last post by: toyotatech3 |
![No New Posts](style_images/1/f_norm_no.gif) |
3sgte intercooler optionsHello just curious alot of people say to run front mount intercooler for the swap do to better cooling and more breather room just curious I have a vis racing carbon fiber hood with vents for my 97 Ce...
Carbon hood
|
9
|
Tmiller |
16,496 |
March 2nd, 2020 - 3:33 PM Last post by: marco2002 |
![No New Posts](style_images/1/f_norm_no.gif) |
Caldina Top Mount IntercoolerHey guys. I have 2 questions please with regards to my ST202.I was going to use a barrell chargecooler and water pump set up etc got my Gen 3 3SGE. Now I've seen Caldina top mount intercooler are...
|
7
|
FunkySR |
15,665 |
March 2nd, 2020 - 3:25 PM Last post by: marco2002 |
![No New Posts](style_images/1/f_norm_no.gif) |
3rd gen 3sgte turbo upgradeWhat's a good direct upgrade to the ct20b?..just ordered link g4 and getting my car tuned sometime soon..i have basic bolt ons and looking at 330whp. Any recommendation on turbos? thanks
|
2
|
Dude25 |
12,918 |
January 22nd, 2020 - 11:34 PM Last post by: chacha |
![No New Posts](style_images/1/f_norm_no.gif) |
3sgte 3rd genOkay here it goes... I've been laying low for a long time researching, learning and trying to get my swap compete. I am no mechanic and I have zero help. I tried very hard to search and figure ev...
PLEASE help me finish my swap!!
|
16
|
celicaGT96 |
21,044 |
November 6th, 2019 - 2:00 PM Last post by: J3rkyBoy |
![No New Posts](style_images/1/f_norm_no.gif) |
supercharging the 5sfeanybody have any info on how to go about supercharging the 5sfe with the 4agze supercharger?i think i can get a hold of one and would really like to fabricate it to the 5sfe. Has anybody done this?...
using a 4agze
|
11
|
spunky393 |
19,204 |
October 23rd, 2019 - 12:47 PM Last post by: njccmd2002 |
![No New Posts](style_images/1/f_norm_no.gif) |
Wastegate ActuatorWhy does the stock st205 wastegate actuator have 2 top ports? One connects to the cold side of the turbo but where does the other one go? Please help thanks
|
1
|
Akira |
15,764 |
May 28th, 2019 - 8:42 PM Last post by: CDUB |
![No New Posts](style_images/1/f_norm_no.gif) |
Charge Cooler Pump... Alternatives??I've already asked once on my project thread and on the FB group but couldn't hurt to get more exposure. Does anyone know of any PnP alternatives to the oem charge cooler pump? My cars in limp...
Need to replace my Charge cooler pump
|
7
|
96graygt4 |
16,222 |
May 10th, 2019 - 3:37 PM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
St246 gen5 3sgte swapJust thought I'd mention I have my gen5 3sgte running on the stock ECU. I have the immobilizer issue fixed. I've wired a further 11 mr2s for people along with one st165.So, in other words, t...
|
8
|
mr220v |
17,689 |
April 8th, 2019 - 8:35 PM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
High flow/volume oil pumpHas anyone upgraded their 2nd Gen 3SGTE oil pump to the units from the newer 5SFE Camry? I'm reading that it fits, but a part of me is kind of skeptical about it.
From a new '99-'01 Camry?
|
4
|
NgoFcukinWay |
15,524 |
January 15th, 2019 - 2:03 PM Last post by: NgoFcukinWay |
![No New Posts](style_images/1/f_norm_no.gif) |
Getting 300hp out of an st205 3sgte reliably?So I'm gonna be doing some work to my st205 swapped Celica over the winter and I'm wondering how much I'd be spending to make 300hp reliably (I'm running a fwd setup). Can this be done...
|
9
|
Wannabesupra |
16,981 |
December 22nd, 2018 - 3:29 AM Last post by: hotgt4 |
![No New Posts](style_images/1/f_norm_no.gif) |
Lagging your TMIC - Need dimensionsFollowing in the steps of everyone with their TMIC, I'm planning to lag my cooler and plan to use gold foiled tape.http://designengineering.com/reflect-a-gol...flective-sheet/My main concern is if...
Looking to see what materials work best in terms of longevity
|
0
|
96graygt4 |
13,192 |
October 7th, 2018 - 8:22 PM Last post by: 96graygt4 |
![No New Posts](style_images/1/f_norm_no.gif) |
Whats the most psi someone has ran on a stock 7afe motor?Hi guys im thinking about going turbo, i have a stock 7afe motor, im currently running a 3 row all aluminum radiator and a big transmission oil cooler with an electric fan on it. I have a brand new to...
Whats the most psi someone has ran on a stock 7afe motor?
|
17
|
rapid36 |
20,519 |
October 1st, 2018 - 8:53 PM Last post by: trd94 |
![No New Posts](style_images/1/f_norm_no.gif) |
5SGTE custom piston.Hi all.So basically I'm considering doing a 5sgte build however as I am based in the UK I'm struggling to find good pistons, there is a few in the USA however import tax, delivery etc makes th...
|
8
|
rhodesyboy |
15,208 |
October 1st, 2018 - 8:48 PM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
Car dies after boostI tried looking but didn't see what I was looking for. I have a 1995 Celica GT with a 3rd gen wrc 3sgte. Drives well and takes off on my BIL's Evo but theres just one issue: car stalls afte...
|
7
|
block |
14,751 |
September 29th, 2018 - 7:54 AM Last post by: block |
![No new](style_images/1/f_hot_no.gif) |
ST185 swap fuel/air ratioHey 6GC Members,I hope you all are doing well.My name is Manu and I am new to this site, so I apologize if this has been discussed else where and I couldn't find it. If there is already a thread,... 12
Getting black smoke from my exhaust
|
20
|
ManpreetS512 |
37,865 |
September 24th, 2018 - 9:36 AM Last post by: ManpreetS512 |
![No new](style_images/1/f_hot_no.gif) |
I am just going to run low boost. . . yea right!This is a cautionary tale to anyone who thinks they are going to slap a turbo on a high mileage engine and run low boost. DON’T DO IT! In December of 2014 despite all the posts that say, don’t b... 123» 11
A warning for anyone who wants to boost a 5sfe
|
203
|
HardHead93 |
203,539 |
September 19th, 2018 - 12:06 AM Last post by: OREOX714 |
![No New Posts](style_images/1/f_norm_no.gif) |
5sfe turboI have an opportunity to get a turbo kit off of a 5th gen 5sfe for cheap. I was wondering if the ecu from it would work on my 95? If not what ecu should I get? I only want 4 psi max for some more fun,...
|
2
|
95chameleonGT |
17,634 |
July 13th, 2018 - 7:55 AM Last post by: NgoFcukinWay |
![No new](style_images/1/f_hot_no.gif) |
94 Celica GT ST215 Transmission AdviceFirst off, my names Kevin. I’m new to the forums over here. I’ve owned my st215 swapped gt for about 2-3 years now. It was stock when I bought it, the turbo went so I slapped a ctx15b 58mm on there an... 12
|
22
|
Kevchek |
38,252 |
May 23rd, 2018 - 11:46 PM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
3sgte 4th gen wiringThe 4th gen requires custom wiring as far as I know, where can I have the wiring done for my Celica?
|
1
|
95chameleonGT |
14,282 |
April 26th, 2018 - 5:27 PM Last post by: richee3 |
![No New Posts](style_images/1/f_norm_no.gif) |
CT15 Wastegate SettingsI just got my CT Sweet 16 turbo upgrade back from ATS racing. It is a CT15b turbo from the Gen 4 3sgte with an upgraded billet wheel.CT SWEET 16-2CT SWEET 16-3CT SWEET 16-1I got the billet wastegate...
|
6
|
HardHead93 |
14,700 |
March 18th, 2018 - 11:42 AM Last post by: 4-eyed-freek |
![No New Posts](style_images/1/f_norm_no.gif) |
3sgte 4th gen wiringI am trying to do the wiring on my 5sfe to the 3sgte 4th gen need some help !
Trying to do the wiring on the 4th gen to a 97 gt celica 5sfe
|
6
|
Tmiller |
16,030 |
January 30th, 2018 - 11:29 AM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
3sgte 4th gen swapCan anyone help me figure out the part number for the serpentine belt ? On the gen 4 please iv been looking and I thought I found the right one but I ordered it and it wasn't even close .. if anyo...
Help !
|
2
|
Tmiller |
13,554 |
January 5th, 2018 - 11:20 PM Last post by: Smaay |
![Closed](style_images/1/f_closed.gif) |
|
3
|
Tmiller |
15,576 |
January 2nd, 2018 - 9:04 PM Last post by: HardHead93 |
![No New Posts](style_images/1/f_norm_no.gif) |
7A-FE Turbo buildOk so i have read the write up by nik , ive read it a few times in fact but there seems to be some information missing , What ecu did he use? what size injector and also what is the hose with what loo...
7A-FE Turbo build
|
2
|
7afecarib |
14,139 |
December 30th, 2017 - 4:24 PM Last post by: puretone |
![No New Posts](style_images/1/f_norm_no.gif) |
3rd gen 3sgte in OBD2 carAs the title states, I have a 1996 OBD2 vehicle with a GEN3 swap, and I need to get it inspected. The shop tried plugging in to the OBD2 port, but it would not communicate with the state software. W...
Need help with NJ state inspection
|
7
|
JamesNYC |
15,467 |
December 20th, 2017 - 8:35 PM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
5sfe to 3sgte (3rd gen)Hi my name is Mark, and I have recently blew my rods in my daily 1992 Celica GT. I took this as a sign that its time for me to start building experience and experimenting so I can grow and better myse...
Engine swaps
|
1
|
RELICelica |
14,104 |
November 5th, 2017 - 9:46 PM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
Gen 4 3sgteHello I know I have been making alot of threads but thanks to you guys I now have the 3sgte in my celica ! With a few more things and it's done ! Just curious what's the best way to ru...
Opinions
|
2
|
Tmiller |
13,924 |
November 5th, 2017 - 9:43 PM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
help me!I just recently bought a 94 celica gt with a ct26turbo 460cc injectors...the guy said he bought it from a guy on here who built itIt came wit a SAFC-II and i know i really cant mes with this without a...
|
3
|
petertohen |
15,254 |
October 19th, 2017 - 8:57 PM Last post by: Smaay |
![No New Posts](style_images/1/f_norm_no.gif) |
Gen 4 3sgte turbo map sensorDo I 100% need a turbo map sensor the one that is plugged into the intake ? I was told I can just go away with it and do it direct
Opinions
|
1
|
Tmiller |
13,966 |
October 15th, 2017 - 8:31 AM Last post by: HardHead93 |
![No new](style_images/1/f_hot_no.gif) |
3sgte 4th gen swapI have the 3sgte 4th gen engine on the way and getting things ready to go! Looking for help and ways to get it going ! Right now I have done alot of research and talked to tons of people. I wa...
Hello I am trying to swap my Toyota Celica 97 gt to a 3sgte 4th gen
|
19
|
Tmiller |
21,141 |
September 23rd, 2017 - 12:08 AM Last post by: richee3 |
![No new](style_images/1/f_hot_no.gif) |
5sfe to (rev3) 3sgte Wiring ExplainedDue to the number of questions surrounding this portion of the wiring job when installing a 3sgte engine I decided to make a little how-to of my personal experience. Manny's thread is a great sour... 12
Just wanted to create a How-to due to the amount of ?'s on this.
|
28
|
bsamps4 |
55,635 |
September 21st, 2017 - 7:25 PM Last post by: richee3 |
![No New Posts](style_images/1/f_norm_no.gif) |
7A-FE turbo buildhey guys, i recently bought a clean stock 95 celica with the 7A-FE engine and im wanting to add on a turbo build.ive never messed around with turbos so i might say some stupid stuff. but i have a few...
|
5
|
lolfluffy32 |
26,785 |
September 20th, 2017 - 11:43 AM Last post by: njccmd2002 |
![No new](style_images/1/f_hot_no.gif) |
Building a diypnpI have been having nothing but trouble with my AEM FIC on my 5sfte set up. I have a 97 Celica GT Convertible with a newly rebuilt engine and a 16G CT-26 turbo set up. The ECU is not working well wit... 123
Standalone harness wiring
|
48
|
HardHead93 |
488,000 |
September 3rd, 2017 - 3:12 PM Last post by: HardHead93 |
![No New Posts](style_images/1/f_norm_no.gif) |
New impeller wheel balancing?Hi, basically I have got the inlet housing off the turbo to clock it and in a bit of frustration I may have chipped the edges of a few of the impeller blades So basically I'm just wondering if I...
|
2
|
rhodesyboy |
24,445 |
August 18th, 2017 - 6:40 AM Last post by: rhodesyboy |
![No New Posts](style_images/1/f_norm_no.gif) |
Exhaust for 3sgte swap?I plan on doing a gen4 3sgte swap later in a few months and I just want to know if there any exhaust that are made for st202 or st205 celi that will fit st204 celi?? I want hks hi-power exhaust, but d...
|
6
|
6GCeli95 |
16,468 |
August 13th, 2017 - 9:59 PM Last post by: HardHead93 |
![No New Posts](style_images/1/f_norm_no.gif) |
7A-FZE Supercharged EngineHi everyone! Me and my team are building a 7A-FZE on a 1995 Celica ST. I just brought a MERCEDES OEM Supercharger, SLK and E200 derivation. Any advice on the building? The car has 237.000 km, and...
|
3
|
Emanuele_Celica_TRD |
14,320 |
July 11th, 2017 - 1:22 PM Last post by: njccmd2002 |
![No New Posts](style_images/1/f_norm_no.gif) |
3sgte gen 3 running wastegate pressure onlyGood day guysAloha from South Africa from a fellow toyota and 3sgte enthusiast, even although it is found in an sw20.I have a small problem, after i did the gen 3 swap to my 91 jdm mr2 i am enjoying b...
|
1
|
otius |
14,481 |
June 26th, 2017 - 3:03 PM Last post by: Mr_Tee |
![No new](style_images/1/f_hot_no.gif) |
3SGTE with auto trannyI've looked through all the stickies and did some searching so NO BASHING.It seems like everyone who has a 3sgte has a manual tranny. I'd like to know why. Is it because of the whole manual... 12
Is it as easy as bolting on?
|
32
|
desertwolf300 |
98,459 |
June 14th, 2017 - 2:12 PM Last post by: WannabeGT4 |
|
|