 5sgte rwd conversion |
  |
 Apr 16, 2014 - 6:34 PM
|
 
|
|
Enthusiast  Joined Nov 15, '10 From ABERDEEN WA Currently Offline Reputation: 3 (100%)  |
well i've started what most people dont have time for. I'm in the middle of building my 5sgte and Rwd conversion,
I have a couple pictures to start with. If you have any question, just ask.   I'm using a 88 toyota truck rear end 2wd. This rear end is harder to find, because it uses the 8 inch center section. And that comes with 30 spline axles. I'm not using the third member. I went with a toyota v-6 4x4 3rd member, that will allow you to buy a supra lsd that will bolt into the v-6 housing. I'm going to be using the stock v-6 gears that comes with 4.10 gears, It may be a little high, but i'll run those for a little bit. Also when i have the lsd out, i'm install a WEIR MAXGRIP LSD Kits It increases the locking force of the clutches. So i'll be posting pictures as i go. This post has been edited by toy8490: Apr 16, 2014 - 6:43 PM |
|
Apr 16, 2014 - 7:18 PM
|
|
|
Enthusiast Joined Nov 15, '10 From ABERDEEN WA Currently Offline Reputation: 3 (100%) |
Fitting the engine and transmission, Dont worry, this is not the block i'll be using, lol. this one has a hole in the side of the block
|
|
Apr 16, 2014 - 7:25 PM
|
|
|
Enthusiast Joined Nov 15, '10 From ABERDEEN WA Currently Offline Reputation: 3 (100%) |
I'll be using a 1990 ford mustang rack and pinion, because, they use front steering racks.
|
|
Apr 16, 2014 - 8:03 PM
|
|
 Enthusiast Joined Nov 30, '04 From Atlantic City Currently Offline Reputation: 21 (100%) |
looking forward to this build, awesome work thus far!
-------------------- |
|
Apr 16, 2014 - 8:36 PM
|
|
 Enthusiast Joined Mar 6, '12 From Brisbane, Australia Currently Offline Reputation: 6 (100%) |
Wow, that's awesome!!! 
--------------------  SOLD :( 1997 ST204 Celica ZR -----> See it here on 6GC! 2013 October Celica of the Month XD Now: '00 NB8B Mazda MX5 -----> See it here in off topic! |
|
Apr 16, 2014 - 8:57 PM
|
|
 Enthusiast Joined Nov 29, '10 From Lake Havasu City, AZ Currently Offline Reputation: 31 (100%) |
Should be awesome. Definitely going to watch this thread.
--------------------  6gcHeroes:808hectortimmybatmandiegotigamak |
|
Apr 16, 2014 - 9:05 PM
|
|
|
Enthusiast Joined Jan 12, '09 From State College, PA Currently Offline Reputation: 1 (100%) |
At least she'll have a low center of gravity
 Enjoy! |
|
Apr 16, 2014 - 9:18 PM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
if you're using the 5sfe block, what transmission do you plan on using?!
|
|
Apr 16, 2014 - 9:28 PM
|
|
 Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
subscribed!
--------------------  *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
|
Apr 16, 2014 - 10:59 PM
|
|
|
Enthusiast Joined Nov 15, '10 From ABERDEEN WA Currently Offline Reputation: 3 (100%) |
QUOTE (cheela @ Apr 16, 2014 - 10:28 PM)  subscribed! I'm using a 1990 Toyota pickup 5speed v-6. All the bolts line up but 1. So I had 1 bolt hole relocated and welded into place while it was bolted to the block. |
|
Apr 16, 2014 - 11:04 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
i believe that is an R154 transmission or is it the W58?
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Apr 17, 2014 - 1:19 AM
|
|
 Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
R154 was in the Supra Turbo, W58 was in the non turbo Supra. If I had to take a guess W58.
-------------------- 2001 Miata LS 5-speed
|
|
Apr 17, 2014 - 2:12 AM
|
|
 Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
Nice. A 5sgte that's something uncommon and especially a rwd conversion. This is going to be unique build.
-------------------- |
|
Apr 17, 2014 - 8:12 AM
|
|
|
Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
W58 requires a 2s bell housing to mount to the 5s/3s block?
Would love to know exactly what is being used. I'm interested in this ordeal This post has been edited by playr158: Apr 17, 2014 - 8:14 AM |
|
Apr 17, 2014 - 9:04 AM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
this is finally happening. RWD conversion... YAY
like to see pics of the mounting of the rear axle. SweeT.. -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Apr 17, 2014 - 9:40 AM
|
|
|
Enthusiast Joined Nov 15, '10 From ABERDEEN WA Currently Offline Reputation: 3 (100%) |
The transmission is very close to a r154. The transmission is a r150. still just a strong as the supra transmission. It just has different gearing.
I'll be getting some pictures of the rear end suspension set up soon, I used most of a toyota previa van rear suspension. This post has been edited by toy8490: Apr 17, 2014 - 9:44 AM |
|
Apr 17, 2014 - 9:47 AM
|
|
|
Enthusiast Joined Oct 26, '09 From Florida Currently Offline Reputation: 2 (100%) |
NICE! pictures of rear from underneath?
|
|
Apr 17, 2014 - 12:03 PM
|
|
 Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
Now this is something I might have to do in the far future....
Looking forward to see more pictures! |
|
Apr 17, 2014 - 1:29 PM
|
|
|
Enthusiast Joined Nov 15, '10 From ABERDEEN WA Currently Offline Reputation: 3 (100%) |
Heres a picture of the suspension, Not very bright. I'll have more later.
|
|
Apr 17, 2014 - 2:08 PM
|
|
|
Enthusiast Joined Oct 3, '10 From Lansing, MI Currently Offline Reputation: 2 (100%) |
If you're going through all that effort, why stick with the 4-Cyl,. my future RWD project is hoping to be a Straight Six, or a full V8, not that I won't be watching like crazy to see how yours turns out!
Keep the pics coming, I'm super excited to see this. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 14th, 2024 - 3:43 PM |