Enders swap, Update 11/29/19 Options

[enderswift]

I'm ready

This post has been edited by enderswift: Nov 29, 2019 - 6:58 PM

[beams78]

nice engine hoist now put it to work lol

[enderswift]

nice engine hoist now put it to work lol

Soon. I take delivery next week

This post has been edited by enderswift: Aug 12, 2011 - 6:53 PM

[cheela]

I can sense the epicness already

[delusionz]

must be a late model 96 or 97, mines 205-0011162

[azian_advanced]

that's a close guess. it's a january 97 production model.

I can sense the epicness already

x2 i love these 3sgte progress threads.

[str8thugginit4ya]

In curiosity, is that the clip they were selling on Ebay? With the rear diff & everything?



-Ryan

[enderswift]

Hey everyone,

today was the big day. I finally took delivery of my st205 front clip. I am beyond happy at the moment as this is the culmination of four years of buying tools, working hard, and saving money. During that time I had to live out my love for cars vicariously through the many awesome 6gc threads and through all the projects my friends took on. But now its my turn

Before I go on I want to give credit where its due and tell everyone about my experience with JDMengineworld http://jdmengineworld.com/. This shop is based in New York and has been open since February. I was originally nervous about the fact that these guys were so new and their lack of forum feedback. However after buying this clip I have nothing but good things to say. Everyone I spoke with was courteous and professional and more than accommodated my requests. I asked for compression test videos and got them in 45 min. I asked for specific photos numerous times and received them right away; which is saying a lot considering they have to pull the clip off the shelves each time. My calls were always returned, all of my questions were answered, and they put up with my nit picking when other places (osaka) started to get annoyed. These traits made them stand apart from the other importers and were what ultimately motivated me to take the risk and go with an unknown shop. So as far as customer service is concerned, they are top notch. But that's not all, my clip was very well packaged, arrived in 3 days, and was just as they described. It even came with bonus jdm tails

So if anyone else is looking to buy stuff, then call them up and ask for Jack.

And now the pictures:


I was standing there just waiting for the clip to fall off haha.



I didn't post any unpacking photos, but everything was stacked and packed with care. Quality stuff

I am absolutely amazed at the condition of this engine, you really cant tell its 13 years old

I love the gt4 bumper, and I cant wait until next summer to get it all painted and installed



The hood needs a little attention from when it was damaged in Japan, but its all small stuff so I'm not worried.

Finally, my project begins...

[enderswift]

I'm planning on breaking this project down into phases so as to avoid rushing anything. I want to do this swap properly, and that means taking my time. So between finishing up my engineering degree, and my job, I expect the first phase to take about a year.

Phase 1. Pull motor, rebuild it completely, and swap into my celi with the s54

Phase 2. convert the e154f to fwd with a Quaife ATB LSD, prepare superstrut for for LHD, swap into car

Phase 3. Convert e154f back to awd and weld-in the rest of the drivetrain.

I cant wait.

This post has been edited by enderswift: Sep 12, 2012 - 10:05 PM

[beams78]

awesome clip dude that thing looks like its been babied for all its life ill keep that shop in mind when the time comes for me to do a swap on mine out of curiosity how much did this cost anyway?


This post has been edited by beams78: Aug 17, 2011 - 1:38 AM

[BonzaiCelica]

NICE. The Superstrut Suspension will help reduce torque steer and wheel hop. You'll definitely need it with that massive increase of torque you'll get from the swap. your going to use that heavy transmission that came with the engine!?? I heard that things weighs twice as much as the s54.

This post has been edited by BonzaiCelica: Aug 17, 2011 - 1:58 AM

[enderswift]

NICE. The Superstrut Suspension will help reduce torque steer and wheel hop. You'll definitely need it with that massive increase of torque you'll get from the swap. your going to use that heavy transmission that came with the engine!?? I heard that things weighs twice as much as the s54.

Well, I think the weight difference is made up for by the longer gear ratios and added strength. Plus I want to take on the challenge of converting the transmission. If it works then I'll put together a comprehensive thread detailing the process. If it doesn't work then I really wont lose anything.

Got the clip started!


Spent a good amount of time last night tracing and tagging all of the fuel and brake lines on the clip. Then I spent today taking apart the rear seats to reach the fuel pump. I had to do some investigating with the multimeter, but I eventually identified the power wires and confirmed their polarity. After that I attached fuel hoses to the pump and ran them to the corresponding lines on the clip. Next I wired the fuel pump directly to the battery and fired the beast up. Observe:

http://s74.photobucket.com/albums/i277/sub...=Firststart.mp4


It started like a champ, and I was amazed to find no engine codes. The whole point of this was to make sure that all the electronics were functioning. The startup confirmed that, and I was happy. Next step was to run proper compression test on a warmed up engine. So I let it run for 15 minutes before testing out my bonus turbo timer. Long story short I found 164 psi across all cylinders, which is simply perfect.

At this point my buddy asked me why I was even bothering to rebuild the engine at all, and I could see his confusion. My reasoning was that good compression numbers aren't everything; even a leak down wont tell you the whole story. For all I know this engine could be an oil burner that was beat on its whole life. Furthermore its going on 13 years old. I'd rather tear it down and start with a clean slate.

Plus rebuilding is fun

so the next order of business is to label EVERYTHING before taking various parts off and cataloging them. I plan to make a very detailed log of all the parts with pictures, notes, and hand drawn diagrams. I also have a million boxes from work just to keep everything labeled and organized. That way I wont get lost when I try to put this thing back together. Organization is key with a project like this.

anyway, tell me what you guys think and stand by for the next update

This post has been edited by enderswift: Sep 10, 2014 - 7:07 AM

[jordisonjr]

You sound super organized.
What do we think?
I think you should swap my car when you're done

[rave2n]

Sexy clip you have there.

Eager to see progress!

[Batman722]

looks like you're doing things right

nice job !

[mkernz22]

Wow, that thing really does look babied! Even the body panels are almost mint! I think I know where to go when I want to do my swap after college haha
If you don't mind me asking, how much did it cost in total with shipping? You can PM me if you don't feel like posting on here.

[4-eyed-freek]

awsome!!!!

[enderswift]

Wow, that thing really does look babied! Even the body panels are almost mint! I think I know where to go when I want to do my swap after college haha
If you don't mind me asking, how much did it cost in total with shipping? You can PM me if you don't feel like posting on here.

I paid $3500 for the clip and $750 for shipping to Chicago from New York with a quality shipping company. I'm pretty happy with that price point

This post has been edited by enderswift: Aug 18, 2011 - 12:44 PM

[mkernz22]

That is a really good deal man!

[Stambo]

did i finally give you some motivation!?