Project: I dunno yet ('99 GT), NOW with pictures & video [IN COLOR]! (Update BOTTOM of pg.5) |
Project: I dunno yet ('99 GT), NOW with pictures & video [IN COLOR]! (Update BOTTOM of pg.5) |
Sep 21, 2023 - 7:58 PM |
|
Enthusiast Joined Aug 17, '09 From Millard, Omaha, Nebraska Currently Offline Reputation: 1 (100%) |
Oh... forgot to mention... It looked like the sensor had been replaced before. As 2 of the locating tabs were ground off to fit the connector. The locking tab (south) & the one exact opposite (north) were ok but the (east & west) tabs were ground off.
Not sure what might be the exact issue with the cruise control... but after adjusting the cable, setting cruise it will accelerate 5mph past, then slowly decel & keep a few mph above set speed. And it seems the few times I used the decel on the cruise stalk it wanted to accelerate! I only tried cruise a few times so not sure exactly what's happening. I might try & take a video, will probably make more sense there. Bison are the coolest!! Especially when they attack people that get to close to them in national parks, LMAO. Definitely will do that next time! |
Sep 23, 2023 - 10:06 AM |
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
The cable adjustment is probably just donked up.
Service info just says less than 10mm free play, so shoot for 5mm free play on the cable adjustment for that and see how it does. There's a list of symptoms and possible causes but I'm not sure any of those would be helpful. -------------------- |
Sep 24, 2023 - 8:08 PM |
|
Enthusiast Joined Aug 17, '09 From Millard, Omaha, Nebraska Currently Offline Reputation: 1 (100%) |
Yeah I did see some of the service info. Just need more motivation to work on it again, lol.
|
Mar 29, 2024 - 9:29 AM |
|
Enthusiast Joined Aug 17, '09 From Millard, Omaha, Nebraska Currently Offline Reputation: 1 (100%) |
Kinda a dumb question... Any recommendations for fog light bulbs (H3 style)? I want amber/ yellow color.
|
Lo-Fi Version | Time is now: November 4th, 2024 - 8:04 PM |