![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 20, '09 From Winnipeg Currently Offline Reputation: 5 (100%) ![]() |
How the HECK did you get an ST sway bar for 37 dollars?! Also, waaaay back in the journal, how did you manage to get the gtfour bumper fit with the stock hood without a gap? ![]() I have no clue why it was so cheap. I bought it at $37 on amazon and checked on it the next morning to give 6gc a heads up and it had jumped back up to normal price. About the bumper. I didn't do the work, a local body shop installed it. But i believe he had to mold/flex the bumper about an inch for it to work. Sorry not much help lol No Worries, I was just curious what made it fit, whether it was the bumper that was modded or the hood, cause neither appeared to have been modded. I also thought it may just have been the angle of the photo, but it looked great. I wish I coudl find a sway bar for that cheap. Where abouts on amazon were you looking? I didn't even realize they sold parts there. -------------------- -Protection mode, For when your amp tries to blow its load. 1995 Toyota Celica GTS - Daily Driver 1999 Chevy Cavalier - Winter Beater 1994 Honda Civic CX Hatchback - Dead My Celica! |
![]() |
|
Enthusiast ![]() ![]() Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) ![]() |
How the HECK did you get an ST sway bar for 37 dollars?! Also, waaaay back in the journal, how did you manage to get the gtfour bumper fit with the stock hood without a gap? ![]() I have no clue why it was so cheap. I bought it at $37 on amazon and checked on it the next morning to give 6gc a heads up and it had jumped back up to normal price. About the bumper. I didn't do the work, a local body shop installed it. But i believe he had to mold/flex the bumper about an inch for it to work. Sorry not much help lol No Worries, I was just curious what made it fit, whether it was the bumper that was modded or the hood, cause neither appeared to have been modded. I also thought it may just have been the angle of the photo, but it looked great. I wish I coudl find a sway bar for that cheap. Where abouts on amazon were you looking? I didn't even realize they sold parts there. I just searched the model: ST Suspension 51200. I ended up selling it for a little more then what I paid for it tho. You can find all kinds of stuff on amazon. I've found some hard to find parts by going to the manufacturers sites and getting the model numbers. Search by the model cause search by description is garbage on amazon. The bumper looked good without the hood and it flowed great. I've had several people ask me how it was done but the guy who did it for me was no longer at that shop. |
![]() |
|
Enthusiast ![]() ![]() Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) ![]() |
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
Oo rotors for the track
-------------------- For Sale Items:
|
![]() |
|
Enthusiast ![]() ![]() Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) ![]() |
|
![]() |
|
Enthusiast ![]() Joined Jan 9, '15 From Freeport, NY Currently Offline Reputation: 1 (100%) ![]() |
did you get the calipers and brackets powder coated? they look awsome
|
![]() |
|
Enthusiast ![]() ![]() Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) ![]() |
did you get the calipers and brackets powder coated? they look awsome Thanks! Nope, I just cleaned them up really good with a wire brush and brake part cleaner, then painted them with caliper paint and threw on a TTE decal. Turned out a little better than I expected tbh. |
![]() |
|
Enthusiast ![]() Joined Jan 9, '15 From Freeport, NY Currently Offline Reputation: 1 (100%) ![]() |
did you get the calipers and brackets powder coated? they look awsome Thanks! Nope, I just cleaned them up really good with a wire brush and brake part cleaner, then painted them with caliper paint and threw on a TTE decal. Turned out a little better than I expected tbh. he GT backing plate, plus bracket, caliper and brake lines? i was thinking just getting the whole spindles from a yard and putting those in with lines. This post has been edited by LtSolid: Oct 13, 2015 - 2:15 PM |
![]() |
|
Enthusiast ![]() ![]() Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) ![]() |
did you get the calipers and brackets powder coated? they look awsome Thanks! Nope, I just cleaned them up really good with a wire brush and brake part cleaner, then painted them with caliper paint and threw on a TTE decal. Turned out a little better than I expected tbh. he GT backing plate, plus bracket, caliper and brake lines? i was thinking just getting the whole spindles from a yard and putting those in with lines. You will also need the parking brake cables attached to the backing plate. You have to get underneath the car and disconnect them behind the exhaust cover. For some reason this was hardly mentioned so it took me a while to figure out before I found it. This is for the rears. You can just swap the spindles as well but it seemed harder that way, at least for me since i didn't have tools to remove those really have bolts and I want to say the control arm is usually seized, which involves having to cut it. I found it much easier to take off parts individually since I was gonna clean, paint and swap the hardware anyway. This post has been edited by jesse09: Oct 13, 2015 - 3:58 PM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jan 26, '09 From Los Angeles Currently Offline Reputation: 1 (100%) ![]() |
Those calipers came out really nice! Brake upgrades ftw!
![]() -------------------- |
![]() |
|
Enthusiast ![]() ![]() Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) ![]() |
So I didn't expect the EBC green stuff pads to be THIS GREEN. Ya i know that sounds crazy. It doesn't look bad just personally not about the colorful look. I'm gonna dump them and pick up a set of TRD pads for the front and OEM Toyota pads for the rear. Unfortunately cars going to have to sit for about a week until they arrive
![]() Here's a comparison photo of the old cheapo ST rotor vs the slotted EBC GT rotor. ![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) ![]() |
|
![]() |
|
Enthusiast ![]() Joined Jan 9, '15 From Freeport, NY Currently Offline Reputation: 1 (100%) ![]() |
did you get the calipers and brackets powder coated? they look awsome Thanks! Nope, I just cleaned them up really good with a wire brush and brake part cleaner, then painted them with caliper paint and threw on a TTE decal. Turned out a little better than I expected tbh. he GT backing plate, plus bracket, caliper and brake lines? i was thinking just getting the whole spindles from a yard and putting those in with lines. You will also need the parking brake cables attached to the backing plate. You have to get underneath the car and disconnect them behind the exhaust cover. For some reason this was hardly mentioned so it took me a while to figure out before I found it. This is for the rears. You can just swap the spindles as well but it seemed harder that way, at least for me since i didn't have tools to remove those really have bolts and I want to say the control arm is usually seized, which involves having to cut it. I found it much easier to take off parts individually since I was gonna clean, paint and swap the hardware anyway. |
![]() |
|
Enthusiast ![]() ![]() Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) ![]() |
did you get the calipers and brackets powder coated? they look awsome Thanks! Nope, I just cleaned them up really good with a wire brush and brake part cleaner, then painted them with caliper paint and threw on a TTE decal. Turned out a little better than I expected tbh. he GT backing plate, plus bracket, caliper and brake lines? i was thinking just getting the whole spindles from a yard and putting those in with lines. You will also need the parking brake cables attached to the backing plate. You have to get underneath the car and disconnect them behind the exhaust cover. For some reason this was hardly mentioned so it took me a while to figure out before I found it. This is for the rears. You can just swap the spindles as well but it seemed harder that way, at least for me since i didn't have tools to remove those really have bolts and I want to say the control arm is usually seized, which involves having to cut it. I found it much easier to take off parts individually since I was gonna clean, paint and swap the hardware anyway. I just ordered the pads so hopefully they come in next week. They're unavailable at the local dealer but I called another one and they had some in stock. I'll upload some when they come in, until then I'm gonna have to ride on some autozone pads |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
But those vibrant colors really add flare and awe to your whip in the JDM, seem haven't you seen?
-------------------- For Sale Items:
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined May 10, '14 From Tulsa, OK Currently Offline Reputation: 5 (100%) ![]() |
|
![]() |
|
Enthusiast ![]() ![]() Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) ![]() |
But those vibrant colors really add flare and awe to your whip in the JDM, seem haven't you seen? I don't think i've seen it. I wouldn't mind a little green cause I thought the shims would cover up most of it. But it turns out these don't come with shims and installing them isn't recommended. so the green is fully exposed |
![]() |
|
Enthusiast ![]() ![]() Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) ![]() |
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined May 10, '14 From Tulsa, OK Currently Offline Reputation: 5 (100%) ![]() |
Awesome. Yeh that does looks cool especially with the front spoiler! Thanks very much.
|
![]() |
|
Enthusiast ![]() ![]() Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) ![]() |
So the TRD pads were discontinued as expected. I went ahead and kept the EBC green stuff pads on there and have now put about 200 miles on the new front brake upgrade.
Overall a very good improvement over my factory setup so far. It's not too much or too little. Smooth with hardly any noise but there is a moderate amount of dust that has accumulated. Hopefully I'll have times for rears this week |
![]() ![]() |
Lo-Fi Version | Time is now: August 25th, 2024 - 5:15 AM |