New Addition to Our Family, Painted page 7!!! |
New Addition to Our Family, Painted page 7!!! |
Oct 18, 2009 - 3:16 PM |
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
Really cool swap. I like how the red engine went in the red car. So who's faster? The turbo st or this thing? btw, is it me, or is that a little air duct on the alternator? we haven't had the chance to race...yet but it's gonna be fun when we do it's not an air duct it's just a little heat sheild, there's even a heat shield on the clutch slave cylinder I need some type of shield on mine. I think heat keeps killing my alternators as they last about a year before crapping out. A low profile one like that would be nice. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Oct 18, 2009 - 6:07 PM |
|
Enthusiast Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) |
haha we never had a 5sfte after driving for a day the idle is just fine, actually perfect. today we changed the rear sway bar bushings, installed the rear strut bar, set the radio stations and drove that thing hard It feels like normal until about 3.5-4K rpms then it gets going and keeps going. It pulls right until 7200 and is quick. next we're going to do suspension (endlinks, ball joints <-toasted, new struts, springs, tie rods) hopefully before winter, then next spring body work, paint, and wheels. The color we picked is gonna be incredible on a 6gen where can i find the sway bars for the front and rear for my celica? -------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
Oct 18, 2009 - 6:21 PM |
|
Enthusiast Joined Apr 23, '08 From boston MA Currently Offline Reputation: 5 (100%) |
sorry not to thread jack but when are we doing my car?
|
Nov 13, 2009 - 8:43 PM |
|
Enthusiast Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) |
Some new upgrades for our new car...
JDM tails, 5000k HID lows, and a new plate -------------------- |
Nov 14, 2009 - 1:23 AM |
|
Enthusiast Joined May 1, '09 From Guilford Ct Currently Offline Reputation: 0 (0%) |
sorry not to thread jack but when are we doing my car? i seconed that! how much did the swap cost? motor and install? -------------------- 94 st
|
Nov 14, 2009 - 2:39 AM |
|
Enthusiast Joined Jan 29, '07 From Hoyt Lakes, MN Currently Offline Reputation: 11 (100%) |
When is the exhaust going to get fixed. It looks as if the muffler is tilted towards the ground. Unless thats what you like.
-------------------- 98 Celica gt red- totaled deer
94 Celica st black DD (bad weather beater)- totaled deer 95 Celica gt silver- chassis sold 88 Celica All-Trac (Burned to a crisp) 94 Celica gt white (sold) In need of a rust free chassis!!!! |
Nov 14, 2009 - 7:12 AM |
|
Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
When is the exhaust going to get fixed. It looks as if the muffler is tilted towards the ground. Unless thats what you like. i think its just the angle of the pic will. lookin good guys, now it just needs some bodywork and paint! -------------------- Former Team 5SFTE pro member ;)
13.6@108MPH, 5SFTE Powered |
Nov 25, 2009 - 11:23 PM |
|
Enthusiast Joined Oct 30, '07 From Raleigh, NC Currently Offline Reputation: 0 (0%) |
Have you had the chance to get it on the dyno?
I'm hoping to do a Beams swap at some point in time. Always seems like others things come up though. |
Nov 27, 2009 - 1:27 PM |
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
cool looking plate, i have got some goodies coming over for me.
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
Nov 28, 2009 - 1:23 AM |
|
Enthusiast Joined Jan 29, '07 From Hoyt Lakes, MN Currently Offline Reputation: 11 (100%) |
When is the exhaust going to get fixed. It looks as if the muffler is tilted towards the ground. Unless thats what you like. i think its just the angle of the pic will. lookin good guys, now it just needs some bodywork and paint! lol... silly of me to think that you guys would mess up on the exhaust. I totally missed out on the first page.. Nice work on the exhaust Manny. -------------------- 98 Celica gt red- totaled deer
94 Celica st black DD (bad weather beater)- totaled deer 95 Celica gt silver- chassis sold 88 Celica All-Trac (Burned to a crisp) 94 Celica gt white (sold) In need of a rust free chassis!!!! |
Nov 29, 2009 - 1:30 AM |
|
Enthusiast Joined Nov 18, '08 From Idaho Currently Offline Reputation: 1 (100%) |
what color is the car? it looks like a dark red? yah. stock? probably. just wondering.
-------------------- A work in (extremely slow) progress
|
Nov 29, 2009 - 9:52 AM |
|
Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
last night, i finally got to drive dustin and steffs beams powered celica for the first time.
i figured i'd try and do i quick write up of my impressions of it, to try and give the guys (and gals!) that dont know what to expect, or are trying to decide if the beams is for them an idea what it feels like. first off, the car is VERY behaved around town, in low throttle, low load situations. it feels pretty much like a 5s if you keep the revs low, under 4k. it drives just like stock, and since they used a stock clutch, the driveability of it is just like a stock car. fantastic. once you start to get higher up in RPM range, the motor REALLY comes to life, and where the 3sge shines, IMO. it just loves revs. the longer you stay in gear, the faster it gets, right up to the 7250 redline. once you hear that motor sing @ 7k RPM, you just wanna keep downshifting. with a 5s, you tend to want to shift a little early, to stay in the meat of the powerband. the 7a, even more so. the 3sge is the exact opposite, it just begs to be reved up to redline. when you mash the throttle down, the intake note comes up, and that motor just sounds amazing as it rips up the RPM band, screaming its way to redline. i found myself downshifting into 3rd on the highway, and doing redline pulls just to hear the motor sing. the car feels strong, and pulls well. if your looking for brute power, or neck snapping torque, then you want a 3sgTe, because thats not what this motor does. power delievery is VERY linear, but still to me seemed to have a nice jump in power from ~5000rpm to redline. IMO this motor would be absolutly awesome for autocross. the higher redline of the 3sge makes the short gearing of the tranny alot more useable, and the LSD works fantasticly. i love the way it allows power delievery from mid corner to exit, where the car normally wants to just push out the LSD really helps pull the car out of the corner straight. overall, if you like a high reving, performance based n/a motor, that can act like a 5s, and be great around town and daily driving, you'll love the beams 3sge. -------------------- Former Team 5SFTE pro member ;)
13.6@108MPH, 5SFTE Powered |
Nov 29, 2009 - 9:57 AM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
I had a feeling thats exactly what it was a better version of the 5s. do you think you can get a 5s to a beams equiv if you get cams, headers, exhaust, wires, plugs, intake, port polish, rebuild? naaa not even close. maybe only like 160 at most appr.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Nov 29, 2009 - 10:40 AM |
|
Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
I had a feeling thats exactly what it was a better version of the 5s. do you think you can get a 5s to a beams equiv if you get cams, headers, exhaust, wires, plugs, intake, port polish, rebuild? naaa not even close. maybe only like 160 at most appr. no. the head design on the 5s is meant for low end torque and economy, the ge head is performance based. the 1000rpm diffrence in rev limit is huge, and the powerband of the 2 motors are totally diffrent. -------------------- Former Team 5SFTE pro member ;)
13.6@108MPH, 5SFTE Powered |
Dec 27, 2009 - 5:39 PM |
|
Enthusiast Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) |
next for the Beams
-------------------- |
Dec 27, 2009 - 11:11 PM |
|
Moderator Joined Nov 5, '07 From New Zealand Currently Offline Reputation: 3 (100%) |
nice write up manny about the 3sge
so what colour are they going to? -------------------- |
Dec 28, 2009 - 4:03 AM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
ya i heard the beams one time in a mr2 that was crashed, he revved it and it sounded so GOOD!!
Im glad you did that little write up. Cant wait till i get mine. Nice choice for the gt-s rims color. This post has been edited by BonzaiCelica: Dec 28, 2009 - 4:03 AM -------------------- For Sale Items:
|
Jan 2, 2010 - 11:00 AM |
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
the wheels are gonna be powdercoated white
added a TRD strut bay ya ! -------------------- |
Jan 2, 2010 - 11:31 AM |
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
oh man that engine bay is gorgeous!!
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
Jan 9, 2010 - 8:34 PM |
|
Enthusiast Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) |
More about the wheels
Before two had some curb rash, one was very bad. the other two were just fine... Dustin stripped the paint off all of them, I didn't do it very well Then I did some filing and sanding, globbed on some aluminum putty... did even more sanding and filing and sanding again... I just need to do a little more overall sanding on two of them and they will be ready to go for powder coating... I bought the powder from powderbuythepound.com, they shipped extremely fast Color will be Super Durable Wet White: ULTRA SMOOTH FINISH WITH THE HIGHEST GLOSS LEVELS !! PROVIDING LONG TERM RESISTANCE TO CHALKING AND LOSS OF GLOSS USING HIGH-PERFORMANCE PIGMENTS TO PROVIDE LONG TERM COLOR STABILITY ~ SUPER DURABLE WET WHITE ~ POLYESTER~GLOSS LEVEL 95+5% ~ CURE TIME = 400F/10 MIN -------------------- |
Lo-Fi Version | Time is now: November 12th, 2024 - 4:10 PM |