Disc brake swap, would this work? Options

[NEVERSTOP]

Would you be able to swap the supra disc brakes, calipers and **** with the 6th gen ones both usdm and Jdm specs??



edit: I am planning on putting 19" rims on so rotor size doesnt really matter
these are the rims


This post has been edited by NEVERSTOP: Jan 19, 2003 - 9:40 PM

[1_Winged_Angel]

are those exel rims?

[ghostdog]

No, I don't think the Supra parts will work. However, I heard SC300/400 calipers (mb discs as well?) will work, you might want to check that out.

[NEVERSTOP]

the rims are the Axis "muse" rims here is the link.

Thanks ghost dog I will check that out and see if it would work.. I am not sure if it would work with my rear end but might on the USDM 6th gen one

[Charlie97L]

QUOTE (NEVERSTOP @ Jan 19, 2003 - 7:18 PM)

Would you be able to swap the supra disc brakes, calipers and **** with the 6th gen ones both usdm and Jdm specs?? edit: I am planning on putting 19" rims on so rotor size doesnt really matter these are the rims

i'm pretty sure mk4 supras won't work at all, but possibly mk3 ones would work. if you have the JDM hubs, you should just get the JDM Celica GT4 brakes, those are totally sweet... they have "CELICA" written on the caliper. i've been looking into this extensively, and i think sc300 is our best bet... also a possibility are the mr2 turbo brakes.

This post has been edited by Charlie97L: Feb 2, 2003 - 11:58 PM

[Charlie97L]

actually, mk4 supras and mr2 turbos have different wheel offsets, so the discs will not go on our hubs... and i checked the gt4 brakes, and if you don't have the axles, the spindles won't match.

[FallenHero]

Will the rotors from the 7th gen work on our cars?