Stiffen it up,, HOW??, eliminate body roll Options

[t96f]

OK I already have springs and struts. But what else can i do to eliminate body roll.. theres hardly any now but I want as little as possible.. Thinkin about polyurathane bushings,, what do you think,, and is there a rear brace available for our car?? Have a front (stck) gonna beef it up.. Fanx

[3TST]

RS*R rear brace and Suspension Techniques Anti-Sway Bars.
That should fix it!

[BlackBeauty]

Take off the suspension and put iron bars in instead (sorry)

Err.....chamber the tires and put stiffer springs in. Wider tyres too while you're there.

[Mynzeyes]

front and rear strut tower bars, and front and rear sway bars. i would not mess w/ camber, as that will wear your tires if you mess w/ it too much...that would be more for a racing application. seeing as how you already have springs, i can't suggest the ground control coilovers, they are quite nice...so, just check out the parts guide on the home-page of this site, and check out the sway bars and strut tower bars.
-John-

[1_Winged_Angel]

All of your answers can be found here

[Andyman]

QUOTE

front and rear strut tower bars, and front and rear sway bars. i would not mess w/ camber, as that will wear your tires if you mess w/ it too much...that would be more for a racing application. seeing as how you already have springs, i can't suggest the ground control coilovers, they are quite nice...so, just check out the parts guide on the home-page of this site, and check out the sway bars and strut tower bars.  -John-

What's the difference between tower bars and sway bars?

[Coomer]

QUOTE (Andyman @ Feb 8, 2003 - 5:16 PM)

QUOTE front and rear strut tower bars, and front and rear sway bars. i would not mess w/ camber, as that will wear your tires if you mess w/ it too much...that would be more for a racing application. seeing as how you already have springs, i can't suggest the ground control coilovers, they are quite nice...so, just check out the parts guide on the home-page of this site, and check out the sway bars and strut tower bars.  -John- What's the difference between tower bars and sway bars?

The Strut tower bars go inside the engine bay and hatch area, and the sway bars go beneath the car. Performance-wise, I know they both help increase stiffness and decrease body roll, but I'm not sure exactly what each one does.

[Andyman]

ok thanks

[t96f]

Anyone use poly urethane bushings?? did they help ?? what do we think??