Your next (or current) projects, What are they? Options

[Akimbo]

Well, what's everyone's next/current projects? Keep it real and not dreams please.
Right now, I'm working on getting together with some friends to get my Tein S-tech springs on. After than I'm going to be putting on my lip kit and getting it painted, vice versa actually. Then I need to find a spoiler. Also, I'm working on buying some 7th gen GTS rims. And, I'm waiting to get my Street Glow gold series neons working cuz a tube got shattered. Pretty soon my car should look like the little manga car I drew in paint with the spoiler. Today I will be tinting my tails.

Next?

[playr158]

i'm in the process of putting kyb gr-2's on the rear, plans to make a rear lip, tint the tails, and an OPTIX LED under car kit

[chucho]

Gotta get my car painted. As soon as thats done I'm going to do the NA power thing. Get my head worked on and buy this block. And get the cams done. Should give me alittle more speed & keep the car reliable.

After i finish my celica and move out the house, which i should not b spending money and just concentrate on this, i'm going after some old school big block power. I may buy my friends falcon w/ a 351 in it. And make it a drag car but i dont know. I think i'm going to need a bigger block than that. We'll just have to wait and see what i can get ahold of.

[Kwanza26]

I'm currently working on: One AE86 SR5 to GTS conversion (built smallport 4AGE), two GTS motor swaps (one 87 AE86 and one 90 AE92, replacing a siezed motor and one with rod failure), tranny replacement for an EK9 hatch. I have like 4 4AGE's around the shop, a 4AC, a K20A3, a Civic D16 tranny, and we just recently finished a DA6 (for the third time) and a JDM B16B swap into an EG6...

As for the Celica... de-tuning her down a bit for daily driving. I'm also looking to buy/trade for an JDM ST202 from a dude in WA, which might turn into something, but I'm not gonna hold my breath on that one. I'd soooo love to build a 3SGE powered 6th gen... but options are limited... aside from that... juggling 2 jobs and awaiting school...

This post has been edited by Kwanza26: Jul 23, 2004 - 11:52 PM

[Consynx]

simple and plain:
finish up exterior styling w/ little susp work:
Tint, JDM Projectors, Gunmetal Wheels w/ reg. lip, Tein SS Coil-overs, License Plate Shaved, Tail Light Covers.

[boosted_K2]

its no celica but:

1. finish the current project and get it running again
2. New exhaust (possably custom dual exhaust with 2 veilside or blitz cannisters)
3. New seats and steering wheel (most likely sparco for both)
4. Massive turbo upgrade project.

[mikew04]

New axles! Yay!
Then saving money. School is expensive.

[madmods]

Well this sunday, I am going to start putting on the pakfiefer rear end thats made for a hatchback on my coupe. I thought for now I will use rivets since I can grind them off easy and warp the panels with my heat gun until they stay in place. I will then mold it in and fabricate(make them longer) the sides a la "neverstop". Im trying to trade my playstation 2 for my ex's camera. I need the camera so I can take pics.

[tufy]

now i am plannin to make my custom hand brake and shift knob.. i ll let you know in a few weeks. and plannin to re paint roll cage. which colour do you think will be the best?

[Drocay]

1. install my gt4 hood that came in and start my fg trunk
2. order rest of gt4 parts
3. get whole car repainted

[97sccelica]

also non celica

280zx turbo engine swap into 1973 240z with 5spd trans(next week hopefully)

up pipe and gauges for my WRX(right after the engine swap)

turbo back exhaust for my WRX(when it comes in after i order it on monday)

[pxcr440]

as soon as i finish turbo my celica i am gunna be looking for a project car for school this fall , " collision repair and refinishing " , i am looking for a 70-72 chevelle ,

[moltar]

Well, the car is waiting to go in for paint on the 26th to get the TRD wing, 'rare' ViS sides, and OEM extensions installed/painted. Once it gets home, hopefully around the 28th if all goes as planned at the paint shop it'll be time to do some suspension work. I already have new struts for all four corners (KYB GR-2s), and Ground Control coilovers ready to go on. Haven't decided if I'm going to try and tackle the task myself, or just let my mechanic do it. I think it'd be a good experience and that I have to start somewhere, so I'm looking into buying some nice jacks and the rest of the necessary tools. After the suspension is on, I have wheels to take care of. I already bought a set of MSR mesh wheels off of LatinKraze. He had said that one tire was flat but it turned out the rim was cracked, so I just got the rim repaired (on a side note, LatinKraze is a great guy, when I told him about the crack he actually PAYPALED me the money to cover it) and they're waiting to go on. Along with the strut installation I'm putting on the cusco rear strut brace. Once all the stuff I have (all that is mentioned above) is installed I plan on working on brakes/suspension some more. Looking at investing in some suspension techniques sway bars, along w/ doing the rear disk brake conversion (my car is an ST). Hopefully get a DG_Performance front strut brace, and then I'll go from there. Maybe next summer an engine swap or something, we'll see.

[reborn0323]

right now i'm saving up for my next project cuz it's gonna be a big one - i've decided to do everything at once next:

- tein coilovers
- strut brace
- sway bars
- 3sgte swap - either xatracing or local shop
- paint job

[celimanST]

I am still purchasing equipment for my audio install.

I still need to get:

2 8" kicker subs for the doors
1 capacitor
2 10" audiobaun subs(dont rag me I cant affor what I want)


then once I have purchase these things I will do some fiberglassing, some cutting and some drilling to make my enclosure. But first I am going to sound deaden my doors and trunk area. I will also be making a false floor to where one of my after market will be visible.

IT WILL BE SWEET WHEN I AM DONE


After this I think my suspention will need to be upgraded I am thinking KYB GR2 and Aerospeed coilovers. Also some stuff from DG so that my handling will be greatly improved this will prolly be in December sometime or when ever I get to to it.

I have hood scoop that I want put on but before I do that I need a new front bumper(C-one replica). Then some side skirts and a rear lip. Then finally a paint job either blue or yellow I have not figured out which one but I am leaning toward yellow.

William

[tysO]

oh wow tein coils i really really want that..

well im getting my sides and front this week and i already got rear extentions..so i'll be posting new pics soon!

[moltar]

[97Celica]

Well.. I was going to trade my Celica for a Delorean...and go back to the future...ahaha...
J/k..
Current List:
1.Paintjob (just finished my exterior:new wing,Z3 fenders,Invader kit,Rims,Tint)
2.Put in my T-25 Turbo
3.Race every gay civic for money and when I save up enough buy every "hooked up" civic aka civics with fart can exhausts and vtec stickers and drive them off a cliff one by one.
4.Maybe chrome my GT-S rims in BLACK.

[Phat_99CeliGT]

im in the process of trying to get my car back this week.
does that count??

other then that, i quit with the celica till winter.

[FAQdaWorld]

I'm still workin on trying to get the 4agze in? Other than that i just wanna get the celica back and running