6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Did a 1/4 mile drag session today, WOO HOO
post Sep 5, 2004 - 1:10 PM
+Quote Post
kevstir



Enthusiast
**
Joined Jul 5, '03
From Scotland , Uk
Currently Offline

Reputation: 0 (0%)




WOO HOO best time i got was 15.716 with a speed of 90.4 mph only mods are a decat and a k&n induction kit, me well chuffed


--------------------
post Sep 5, 2004 - 1:17 PM
+Quote Post
Digndoug



Enthusiast
*****
Joined Aug 20, '03
From Annapolis, Md
Currently Offline

Reputation: 5 (100%)




Was, that with the 17's on there?? cause thats pretty good
post Sep 5, 2004 - 1:17 PM
+Quote Post
o8poa8o



Enthusiast
**
Joined Jun 11, '04
From Wake Forest, NC
Currently Offline

Reputation: 0 (0%)




sounds good, can you get ssIII's in the u.k.? i kno you can get gt4's...
post Sep 5, 2004 - 1:18 PM
+Quote Post
lagos



Enthusiast
*****
Joined Aug 31, '02
From Philadelphia, PA
Currently Offline

Reputation: 8 (100%)




im guessing you have the 3sge motor and not the 5sfe, right?


--------------------
15PSI - 30MPG - Megasquirt Tuned
post Sep 5, 2004 - 1:19 PM
+Quote Post
kevstir



Enthusiast
**
Joined Jul 5, '03
From Scotland , Uk
Currently Offline

Reputation: 0 (0%)




Yeah m8 thats with my 17's on, tried a few runs without the gt4 spoiler but made no difo


--------------------
post Sep 5, 2004 - 1:19 PM
+Quote Post
kevstir



Enthusiast
**
Joined Jul 5, '03
From Scotland , Uk
Currently Offline

Reputation: 0 (0%)




QUOTE (lagos @ Sep 5, 2004 - 11:18 AM)
im guessing you have the 3sge motor and not the 5sfe, right?

yeah 3s-ge m8


--------------------
post Sep 5, 2004 - 1:38 PM
+Quote Post
Digndoug



Enthusiast
*****
Joined Aug 20, '03
From Annapolis, Md
Currently Offline

Reputation: 5 (100%)




oh thats with the 3s-ge .... isnt that a lil slow??
post Sep 5, 2004 - 2:12 PM
+Quote Post
urbandork



Enthusiast
*****
Joined Jul 16, '04
From Los Angeles
Currently Offline

Reputation: 8 (100%)




awww it wasnt a 5sfe for a while i thought there was was hope for my car lol.
post Sep 6, 2004 - 3:42 AM
+Quote Post
kevstir



Enthusiast
**
Joined Jul 5, '03
From Scotland , Uk
Currently Offline

Reputation: 0 (0%)




QUOTE (Digndoug @ Sep 5, 2004 - 11:38 AM)
oh thats with the 3s-ge .... isnt that a lil slow??

well there was 3 of us there with gen 6 gt's with the 3s-ge and the next fastest was 15.94secs, 89.1mph then 16.05 so i recon it was good , considering it was my first time doing a quater mile im happy, next time i'll give it a go im putting my standard 15" alloys on the front which are a good bit lighter than my 17's also taking the spoiler off and the spare wheel out , with that done im hopeing for 15.5 smile.gif


--------------------
post Sep 6, 2004 - 3:13 PM
+Quote Post
SlowCelica94



Enthusiast
*****
Joined Sep 28, '03
From Bloomington, IN
Currently Offline

Reputation: 0 (0%)




whatd you launch at? 60 foot time?

This post has been edited by SlowCelica94: Sep 6, 2004 - 3:14 PM


--------------------
NASA/SCCA RX-7....currently under the knife
92 Civic hatch B16 - Sold
10th anniv RX-7 - RIP
The Slow Celica - Sold...and then crushed crushed due to street racing.

Quote from Seinfeild: George's Boss reading a magazine: "People magazine's most beautiful people. Oh and a Celica...nothin wrong with that!"
post Sep 6, 2004 - 4:11 PM
+Quote Post
o8poa8o



Enthusiast
**
Joined Jun 11, '04
From Wake Forest, NC
Currently Offline

Reputation: 0 (0%)




3SGE's aint got to much torque, so for a 1/4 you'd have to launch pretty high rpms..... what did you launch at?
post Sep 6, 2004 - 6:36 PM
+Quote Post
kevstir



Enthusiast
**
Joined Jul 5, '03
From Scotland , Uk
Currently Offline

Reputation: 0 (0%)




Reaction time 0.317

60foot 2.587 sec (best of the day was 2.436sec)

mph 90.4

et 15.716

I found the best rpm to launch was between 2500 and 2800

All my times can be seen here guys

http://www.crailraceway.co.uk/select_run.a...unDate=20040905

Here u will find some videos of the day , all the one im in are the ones with kevstir and the en route one as well ...
http://www.andytt.co.uk/Crail_5_Sept/


This post has been edited by kevstir: Sep 6, 2004 - 6:43 PM


--------------------
post Sep 6, 2004 - 7:41 PM
+Quote Post
Kwanza26



Enthusiast
*****
Joined Dec 27, '03
From Nor Cal
Currently Offline

Reputation: 0 (0%)




QUOTE (kevstir @ Sep 6, 2004 - 11:36 PM)
Reaction time 0.317

60foot 2.587 sec (best of the day was 2.436sec)

mph 90.4

et 15.716

I found the best rpm to launch was between 2500 and 2800

All my times can be seen here guys

http://www.crailraceway.co.uk/select_run.a...unDate=20040905

Here u will find some videos of the day , all the one im in are the ones with kevstir and the en route one as well ...
http://www.andytt.co.uk/Crail_5_Sept/

improve your 60 footers and you'll definately improve your time...

I've thrown down some 1.8-2.1 (on slicks) 60 footers that put me in the flat 16's...


--------------------
"It's ok to be naked girl... I'm an artist!"

1995 AT200 Celica ST: stocked out daily driver...

1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies...

1991 SW2x MR2 n/a: bare bones hardtop model soon to be...
post Sep 6, 2004 - 10:30 PM
+Quote Post
SlowCelica94



Enthusiast
*****
Joined Sep 28, '03
From Bloomington, IN
Currently Offline

Reputation: 0 (0%)




I pulled a 2.3 60". Your 60s are horrible. But that's a good thing. Mean you can improve big time. Try launching around 3,500 and drop the front tire psi by 5, and stip out the spare


--------------------
NASA/SCCA RX-7....currently under the knife
92 Civic hatch B16 - Sold
10th anniv RX-7 - RIP
The Slow Celica - Sold...and then crushed crushed due to street racing.

Quote from Seinfeild: George's Boss reading a magazine: "People magazine's most beautiful people. Oh and a Celica...nothin wrong with that!"
post Sep 7, 2004 - 5:36 AM
+Quote Post
kevstir



Enthusiast
**
Joined Jul 5, '03
From Scotland , Uk
Currently Offline

Reputation: 0 (0%)




Cheers for the advice guys will give your tips a go the next time, , before i do it the next time i should have had it rolling roaded,some new leads dizzy cap and rotor arm too as there still the original 10 years old stuff lol
it was my first time doing that so im happy getting in the 15's , im not going to get myself all worked up about a couple off miliseconds its not worth it if u ask me


--------------------
post Sep 7, 2004 - 9:35 AM
+Quote Post
Blakout16

Enthusiast
*****
Joined Jul 3, '04
From Yakima, WA
Currently Offline

Reputation: 1 (100%)




what kind of psi you runnin on the turbo


--------------------
the 1/4 doesnt have patience for a ST.... so we make them ST-T's so atleast we'll sound good going slow.
post Sep 7, 2004 - 9:42 AM
+Quote Post
kevstir



Enthusiast
**
Joined Jul 5, '03
From Scotland , Uk
Currently Offline

Reputation: 0 (0%)




QUOTE (Blakout16 @ Sep 7, 2004 - 7:35 AM)
what kind of psi you runnin on the turbo

Not got a Turbo m8 just the 3s-ge engine with k&n induction kit and a de-cat pipe


--------------------
post Sep 7, 2004 - 9:43 AM
+Quote Post
khye



Enthusiast
*
Joined Apr 17, '03
From Cork, Republic of Ireland
Currently Offline

Reputation: 0 (0%)




QUOTE (Blakout16 @ Sep 7, 2004 - 7:35 AM)
what kind of psi you runnin on the turbo

Non turbo dude!
post Sep 7, 2004 - 9:45 AM
+Quote Post
khye



Enthusiast
*
Joined Apr 17, '03
From Cork, Republic of Ireland
Currently Offline

Reputation: 0 (0%)




Nice one Kev
post Sep 7, 2004 - 3:03 PM
+Quote Post
PaulGT



Enthusiast
**
Joined Nov 8, '02
From Bel Air, MD, USA
Currently Offline

Reputation: 0 (0%)




My Time At the track STOCK 5sfe was a 16.379 but my 60 foot time was 2.37 .....My Goal is to get at least 15.9 now with the work i have done to it!

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 1st, 2024 - 2:43 AM