Decent price for gt-4 hood/bumper Options

[ScoobyDooCruiser]

Hey,
I'm finally getting around to doing the gt-4 hood and bumper combo. I got quoted $1,200 from jeff at toyota world, plus $759 for the projectors and high beams, plus he said about $150 for shipping. My question: Is $2,110 a good price for the whole setup? I'm guessing it will cost me another $600 to get it all painted (plus a couple of bucks to cut the crash bar down). Is this about right for what other people have paid for this?

Also, has anyone done the procedure to cut down the USDM crash bar to make it fit in the gt-4 bumper? If so, could you give me some tips on how to do this. Thanks!

[fastgt]

hey scooby hows 330 for the hood and 180 for the bumper sound?
and you live in cali so local pickup ....and your original crash bar should work on the gt4 bumper

and i can get you both low beam projectors for 470

This post has been edited by fastgt: Aug 18, 2004 - 4:26 PM

[Mynzeyes]

the projectors alone are 470 normal price...and fastgt, where are you getting the hood/bumper for that price? (and please don't just say "connections" . )

-John-

[fastgt]

haha john your making me give my secret away....anyways i can get toyota parts jdm and usdm at cost a local toyota dealership...i wont say which one tho

[BlackCelicaGT94]

U got a little bit more to buy if ur looking for the whole set up


GT4 rear spoiler posts
GT4 rear splitters
GT4 front splitters
dont know if u have sideskirts or not already


Natalie

ive roughly paid around 1800 - 2000 for my whole set up but i dont have high beam projectors!

[OCU_Celi]

[st202gt]

damn that cheap for the hood.........is the hood brand new or use.....email at typer301@yahoo.com I have been look for it a long time.

[Guest_DJMC_Celica_*]

[BlackCelicaGT94]

yes it does! ive done it with my car! fits fine. u just have a bit of a gap for a few months till everything hood and bumper settles

[fastgt]

sorry im late for posting ....busy...everything is brand new and oem- meaning toyota parts

This post has been edited by fastgt: Aug 23, 2004 - 7:03 PM

[Manta5x]

whats the deal with the crash bar?

[fastgt]

if u mean the oem crash bar...it should work with the gt4 front...if im wrong someone please correct me

[trdevelopment]

hey fats gt how much can you get the whole projector setup for?

[wind]

fastgt

how much would it cost me to get the hood and bumper up to canada?

[fastgt]

you should pm me or else i may not see your post...and ill pm you with a price

[presure2]

the OEM crash bar has to be modifyed to fit the GT-4 bumper, you basicly have to cut it lengthwise in half.

[1bwilson]

Can you have parts ordered and shipped to another toyota dealership? Maybe toyoya-toyota would be free shipping?

[fastgt]

doubt that

[lagos]

take the part number to your local dealer...ask the parts place to match that price for you. toyotaworld is a regular toyota dealership. they can sometimes get hard to find stuff because one of the guys that works there has contacts in japan, but the hood and bumper, any dealer can get for u.

just like pressure2 said, you have to cut your crash bar becasue the stock one is too thick.

[shin]

anyone here could hook me up with a link to get the projector low beams and high beam heaglights please? been searching everywhere for it..