6th Gen Swap Options

[Coomer]

As far as mounts, you can use your stock ones. the 4A-GE just bolts up. Wiring involves quite a bit of work. I'm using a highly-modified AT200 harness in my car, but I think Colin is using the AE101 harness for his swap.

[ty708]

Yea i figured it will be quite a bit of wire splicing and putting together. Does anyone know where i can find 4age and 7afe wiring diagrams?

[Consynx]

i think most people bought books on both models, the C_ _ _ _ _ book and the other one i can't even think of...could be wrong on that though

(bump)

[Coomer]

Good luck finding an English book for the AE101 Corolla with the 4A-GE. If you do, let us know, because pretty much everyone in North American with a 20V would like to get their hands on one of those.

You'll pretty much have to modify the harness based on information and diagrams sourced online or from shops that have done the swap before. Wiring is a major pain, and is by far the hardest part of the swap.

[ty708]

ok it looks like im finally going to be starting on this swap soon and am still stuck on the wiring. If im correct the motor will bolt up no problem but the wiring is where ill hit my problems. So for those few of you who have done the swap please help me if you can.