WTB - 94 GT Coupe Passenger fender Options

[Supersprynt]

Mines demolished, need new.

[NEVERSTOP]

If you are reffering to the front one I have one that I am not using but it does have a dent in it but It could easly be pulled out by a bodyshop - not on ne major body lines. you can view the fender in my proflie the dent is just below the stock sidemarker. let me know if you interested I would need probably 50 plus shipping for it.

Otherwise you can get a new one from Accutate auto glass for 170 or so but be careful with them because I had to send back my driver side one twice to get one that wasnt dented worse than the ones I was replacing. the number for them is 1.800.934.4722

If ur interested in mine I would need a shipping address for a price quote on shiping. email and let me know

This post has been edited by NEVERSTOP: Apr 16, 2003 - 12:00 AM

[Supersprynt]

I'm looking for soemthing that hasnt been hit or w/e, but i am interested in the swap u've done - im doing one now and if you have any tips, things to look out for i'd greatly appreciate it.

[NEVERSTOP]

sandwich bags..... lots of them!
index cards...........lots of them!
nice cool place to work at

AND HAVE ALL PARTS BEFORE YOU START!!!!

And ditch ur transmission use the 3sge on if you gonna do front wheel drive only.

Also if you havnt gotten your motor yet make sure that the place you get it from doesnt just cut the wiring harness wires. make sure that they unplug it COMPLETLY from the ECU and that its one piece - some places just sawzall the harness instead of taking 5 extra mins to undo a few bolts so the can keep the harness in one piece... granted you will have to cut apart the harness newayz to lenghen it but its alot easier to do it if everything comes connected instead of trying to figure it out by your self.

Also buy all the books you can relating with the 6th gen and the 5th gen all trac, cuz its the closest thing you can get your hands on to the JDM version of the 3sgte. check in general discussion forum for a topic I posted about manuals there is a number in there to get the manuals CHEAP! ne other questions email me

[Supersprynt]

I got the engine, with an uncut harness, i got the 5sfe disc and 3sgte pressure plate, havent gotten the flywheel yet. I have the ECU and i have ALOT of bags already. And my transmission, wont hold? Cuz i thought it would be ok up until 250, or until I have enuf money to buy another tranny. Where would be a good place to get the 3sge tranny?