jdm SIDEMIRROR wiring INFO, attention NEVERSTOP, CTCAT2049 Options

[NEVERSTOP]

batman.. I might be interested if it has all the parts.. could always use an extra set

[Defgeph]

his are missing the relay, I was biding on those but backed out when I found out I needed the relay.

[Batman722]

I emailed the guy I outbid and it looks like he will take them. Unless anyone here wants them. Let me know

[turboinduction]

NOTICE TO ALL:

I suggest that unless you are very good at electronics, DO NOT bid on Power Folding mirrors until one of the 5 of us figure out if they will work.

1. Has to figure out wiring
2. Has to figure out movement or glass transfer so I can see out of them

Of course, if you want to buy them go ahead.... but better safe than sorry. Any updates guys?

-Ti

[playr158]

yo if you have that relay box i want it NOW....lol
but i need that since i gues you have to have it

6gc PIMPS

[Batman722]

TI, is there a part # on that relay box ? That would be the key to everything...

[NEVERSTOP]

[playr158]

yea if i can get a part numer i will love you forever once i have that its a matter of a few hours till we can hook them up

[NEVERSTOP]

okay... think where in luck with the mirror swap.. I opened up my pass side JDM and USDM.. you basially have to use a flat screwdriver and pop off the glass... stick the screwdriver on the underside of the mirror (bottom) and pop it off. You need to remove 3 screws and the motor assembly for the mirror will come out.. there are 3 wires that have to be cut. luckily there red, black and brown on both JDM and USDM.. so hopefully there the same function for both. I will finish putting the USDM mirror in the JDM housing in a few mins and let you guys know if it can move still like the USDM one.

Here are a few pics of the USDM one:

[BenMMellor]

Looks like us BRITS will have to help you guys out YET AGAIN !!!!!




http://www.celica-club.co.uk/cgibin/phpbb2...pic.php?t=20810

[Batman722]

This is nice the site doesn't mention the relay. Only the control unit ( which is the part on the door panel, right ?

edit : the pic


This post has been edited by Batman722: Nov 2, 2004 - 3:39 PM

[NEVERSTOP]

KICKA$$ ben once agian you have been nothing but helpful

just wish I had time at the moment to read the whole howto

as for the mirror swap... WORKED PERFECT! no probs at all and even got to retain the JDM glass! and we all know how important that is

Like 5 extra HP just in the glass

The only prob I had is when I spliced together the wires I tried to use posilocks.. which where too big to fit into the allowed space for the wires.. you'll see what I mean when you open them up yourselfs.. TO get around this I just used electircal tape and then heat shrinked over it... worked perfect... its nice to be able to see outta my pass mirror agian

Gonna do the drivers either later tonight or tomorrow - dont expect ne probs with it but will post results regardless

[turboinduction]

since I love you all

I'm not sure of the part number but heres whats written on top. I assume it is, but no flaming if its not.

Toyota Mirror Control
12V
87989- [20030]

The 20030 is raised up

Hope that helps

-Ti

But from that write up it looks like you dont need the relay as your stock one will do. YEAH US!

[playr158]

hmmmmmm site bookmarked for when i get the celi back and running i foundly found a reason why the brits are usefull;)

[turboinduction]

wait maybe not

Playr heres your pic



just like mine........

We have a Pink (Light Red) wire in the upper right. They have a Red/Yellow and a Blue/White wire.... how do we overcome this?

-Ti

This post has been edited by turboinduction: Nov 2, 2004 - 4:44 PM

[BenMMellor]

once again I can't take the credit.. one of the UK club members sorted it out.. all kudos goes to him.. I just like to share information out.

[turboinduction]

I just looked..... I have a Red/Yellow and a Blue/White wire on my relay though...

[playr158]

hmmm i could have gotten different reactions on my set because i didn't have the relay(the box) so that could have made things different i say go with that site cause the box changes alot

[turboinduction]

I would go with the site

BUT!

That site has 9 wires in the control unit

Mine only has 8

Instead of the Red/Yellow and Blue/White - I have a Pink

-Ti

[Batman722]

I will have my mirrors in about a week or so. A few days after that I will have them hooked up and working properly. Honestly, I don't really care if they can't be adjusted with the switch, just as long as they fold in and out

I will try to wire them without the relay like on that site and have them work 100% normally. If not I will order the relay. I have wired plenty of things before and I will be able to figure these out when I get them.

NEVER, if you are able to get the stock relay let me know.