Cabin filters.. |
Cabin filters.. |
Nov 3, 2004 - 4:04 PM |
|
Enthusiast Joined Nov 3, '04 From Colorado Currently Offline Reputation: 0 (0%) |
I know 7th gen's have them.. Do we?
|
Nov 3, 2004 - 4:28 PM |
|
Enthusiast Joined Jul 3, '04 From Yakima, WA Currently Offline Reputation: 1 (100%) |
cabin filters?
-------------------- the 1/4 doesnt have patience for a ST.... so we make them ST-T's so atleast we'll sound good going slow.
|
Nov 3, 2004 - 5:19 PM |
|
Enthusiast Joined Jun 29, '03 From canoga park , ca Currently Offline Reputation: 0 (0%) |
yea... i belive most cars made after 1980 do but im not sure. newbie what part of co are you in?
This post has been edited by shadycrew31: Nov 3, 2004 - 5:20 PM |
Nov 3, 2004 - 7:07 PM |
|
Enthusiast Joined Aug 21, '04 From New York City Currently Offline Reputation: 0 (0%) |
what's a cabin filter?
-------------------- |
Nov 3, 2004 - 7:10 PM |
|
Enthusiast Joined Aug 29, '02 From New York City, NY Currently Offline Reputation: 1 (100%) |
A cabin filter works much like the filter used with your furnace and/or air conditioning system in your home. A cabin filter traps close to 100% of airborne contaminants before they enter the interior of your vehicle through the heating and air conditioning system.
|
Nov 3, 2004 - 8:59 PM |
|
Enthusiast Joined Jun 29, '03 From canoga park , ca Currently Offline Reputation: 0 (0%) |
i wouldnt say 100% or even close
more like 70% |
Nov 4, 2004 - 1:24 AM |
|
Enthusiast Joined Nov 3, '04 From Colorado Currently Offline Reputation: 0 (0%) |
Well, I want to know if it exists. If so, then I would like to know where it is..
Another is, where can I get this EGR valve filter thingie? Or can I make it out of something else? |
Nov 4, 2004 - 8:39 AM |
|
||
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
we dont have a cabin filter like they do. egr is already part of you usdm engine, its for emissions. jdm motors dont have it and there is no way to add it on. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
||
Nov 4, 2004 - 12:09 PM |
|
||
Enthusiast Joined Aug 20, '03 From Annapolis, Md Currently Offline Reputation: 5 (100%) |
I would think you could make it out of filter cloth or panle used from like home-depot.. it dosnt look like much. but you can just clean it out. I used carb an choke cleaner, and then just socked it an let it dry a few times... |
||
Lo-Fi Version | Time is now: January 11th, 2025 - 5:37 AM |