im going to paint my brake caliper, and drum in the back... what paint? Options

[x_itchy_b_x]

what paint should i use to properly get the job done and stay looking nice.
i mean no chiping or burning off. thx

[boosted_K2]

well to be able to spray it and forget about it, get the actual caliper paint, they got it at alot of autostores and at like nopi etc... i use engine enamel and just some automotive clear coat, it works fine! alot cheaper also, i used lime green at 1st but w/o the clear coat, it started wearing away and looked like a pea green, kinda hideus... i then stripped em and painted em a dark blue and used clear coat, looks great and never had to repaint em yet. i probably will after winter...

[JWalk1818]

Well I just used 500 degree paint for them , but you can get up 1200. I need to do mine againg but they have lasted 2 years!

[x_itchy_b_x]

i did it taday i use engine enamel that is for 500 degree so that worked good i did two coats.

[boosted_K2]

i used 500 the 1st time, 1200 the second, decided i really didnt wanna mess with it again for a while...

[JWalk1818]

Yea if I ever do mine agian im gogin to use 1200 degree, but it really hasent burnt off jsut chipped from peeps hititng it!

[CDNSLEEKA]

i only used engine enamel 500... worked fine..clearcoat is a good idea!!

[NEVERSTOP]

Be sure that you are using automotive primer... will help with the chipping

[Phr0z3n664]

I used the Engine Enamel and sprayed about 5 coats, w/ no clear coats and it's perfect, only thing is that my calipers are bright green and they happen to attract the brake dust.