 Eibach and TRD Springs, Which are the comparable springs? |
  |
 Nov 22, 2004 - 9:58 PM
|
 
|
|
Enthusiast Joined Jul 3, '04 From So Calif Currently Offline Reputation: 0 (0%)  |
I've read in this forum that the TRD springs are made by Eibach. Since the TRD springs are said to lower the car 1 to 1.5 inches, which Eibach spring is it, the Pro-Kit or Sportline? Thanks.
|
|
Nov 22, 2004 - 10:06 PM
|
|
 Enthusiast  Joined Oct 22, '02 From irvine Currently Offline Reputation: 3 (100%) |
trd springs are a more expensive, rebadged version of the eibach prokit (1in)
--------------------  |
|
Nov 22, 2004 - 11:40 PM
|
|
|
Enthusiast Joined May 19, '03 From NJ Currently Offline Reputation: 0 (0%) |
May be spring rates are different I mean some of them are less bouncy
|
|
Nov 23, 2004 - 3:15 PM
|
|
 Enthusiast Joined Nov 16, '04 From UK Currently Offline Reputation: 0 (0%) |
My TRD springs and topmounts should be here in about 10 days.
-------------------- JDM ST205
Blitz Spec NUR Exhaust, somewhere over $1000 Needing another one 18000 miles later, bloody annoying. |
|
Nov 24, 2004 - 7:45 AM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
like azn said, the TRD springs are made for TRD by eibach. theyre basicly the pro kit rebagged.
-------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
Nov 30, 2004 - 9:50 PM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
Popular wisdom says that the TRD spring only lower your car 1 inch. I can say without a doubt this is total BS. My car was lowered 1.75" all around. Looking at pics of my car against those with sportlines show they are almost identical in drop. As for being more expensive, it depends on where you get your TRD's...
-------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
|
Dec 1, 2004 - 10:16 PM
|
|
|
Enthusiast Joined Jul 3, '04 From So Calif Currently Offline Reputation: 0 (0%) |
QUOTE(jgreening @ Dec 1, 2004 - 2:50 AM) Popular wisdom says that the TRD spring only lower your car 1 inch. I can say without a doubt this is total BS. My car was lowered 1.75" all around. Looking at pics of my car against those with sportlines show they are almost identical in drop. As for being more expensive, it depends on where you get your TRD's... [right][snapback]214927[/snapback][/right] Sounds to me like the TRD springs are more like the Eibach Sportlines, not the Pro-Kit. Anyway, are you happy with your drop? Looks like the front has more of a gap than the rear in your pics. |
|
Dec 1, 2004 - 10:17 PM
|
|
|
Enthusiast Joined Jul 3, '04 From So Calif Currently Offline Reputation: 0 (0%) |
QUOTE(Mr_E @ Nov 23, 2004 - 8:15 PM) My TRD springs and topmounts should be here in about 10 days. [right][snapback]211032[/snapback][/right] Please give us your feedback when you install them! |
|
Dec 2, 2004 - 12:59 PM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
QUOTE Sounds to me like the TRD springs are more like the Eibach Sportlines, not the Pro-Kit. Anyway, are you happy with your drop? Looks like the front has more of a gap than the rear in your pics. You are correct. They are more like the sportlines in terms of drop. I am happy with the drop. The front does have a bit more of a gap because thats the way it is stock. There is a 1/2" difference in gap in a stock car. The TRD's dropped the car 1.75" all around so the front still has a little bit of a gap. If you want something that looks even, you might want to try the Tein S-Techs. They drop the car .9" in the back and 1.4" in the front for a nice even look. You will actually get a little more of a drop than that once it settles. Also, they are cheaper and people seem to be happy with them. -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 28th, 2024 - 4:06 PM |