 cutting the license plate ???, is it leagal? |
  |
 Dec 1, 2004 - 11:46 AM
|
 
|
 Enthusiast  Joined Aug 20, '03 From Annapolis, Md Currently Offline Reputation: 5 (100%)  |
I was wondering, if cutting the bottom of the license plate off would be illgeal? It would be right after the numbers, therefore only cuttin off usless 2 inch's of blank space. I know, it might very from state to state, but any body have some input?
|
|
Dec 1, 2004 - 12:17 PM
|
|
 Enthusiast Joined Feb 25, '04 From Wisconsin Currently Offline Reputation: 0 (0%) |
I was wondering this myself for the front plate. Why do I need 2 inch's on white space blocking airflow into my car. And then, why do I have to broadcast that i'm from Wisconsin on the front when its clearly visible on the back. The numbers are whats important anyway, and if I just had numbers, no extra, then the front plate wouldn't be too bad. I'd just tuck it a little under the lip and have a 1&1/2 inch plate of just numbers. Just a thought. I have no clue whether its legal or not. My brother is a cop and I plan to ask him. I've known many people who have bent the plate after the numbers so its not so .... blockable. I'll let you know. WOW I TYPED ALOT.
-Ti This post has been edited by turboinduction: Dec 1, 2004 - 12:18 PM |
|
Dec 1, 2004 - 12:48 PM
|
|
 Enthusiast Joined Mar 4, '03 From Kirkland, Washington Currently Offline Reputation: 0 (0%) |
yes - my friend got pulled over for it!
-------------------- Cruisin down the street in my Infiniti...always lookin for my next trip to Sin City
|
|
Dec 1, 2004 - 1:02 PM
|
|
 Enthusiast Joined Nov 13, '02 From So Cal Currently Offline Reputation: 3 (100%) |
i wouldn't do it. its like cutting off the unprinted edges of a dollar bill. vending machines wont take it, and cashiers will look at u funny.
 --------------------  |
|
Dec 1, 2004 - 1:29 PM
|
|
 Enthusiast Joined Oct 1, '02 From Seattle, WA Currently Offline Reputation: 0 (0%) |
yes, its is very very illegal. It doesnt vary with state... altering anything that is federal or state issued to the point where it not still in its original form is illegal.
-------------------- Its Orville's Celica, i just drive it... |
|
Dec 1, 2004 - 1:31 PM
|
|
 Enthusiast Joined Aug 30, '02 From Michigan Currently Offline Reputation: 0 (0%) |
anything resticting view of the ENTIRE plate is illegal, TECHNICALLY by the word of the law you can get pulled over for license plate covers. nor can you paint or tint a plate.
--------------------  Believer, you'll leave her, in leaving them all No but I don't buy it Like anything you do, as anyone you are Cause I'm... Ten Speed, of God's Blood & Burial |
|
Dec 1, 2004 - 2:12 PM
|
|
 Enthusiast Joined Mar 11, '04 From Oakdale, MN Currently Offline Reputation: 3 (100%) |
Yes it is illegal. You can bend it but just don't get caught
-------------------- -Brad
95 GSX: Stock motor, fp3065, corn = 10.9 @ 140 06 R6: Strappd and sprocketed = 11.0 @ 127 01 a4: daily 94 Celica: totaled - someday have another celica thats fast instead of looks cool |
|
Dec 1, 2004 - 2:19 PM
|
|
 Enthusiast Joined Oct 22, '03 Currently Offline Reputation: 0 (0%) |
I dont use the front license plate. I do carry it in my car just in case I do get pulled over, I can tell them that one of the bolts came undone and it was just hanging there, so i took it off. Hope it works.
|
|
Dec 1, 2004 - 2:24 PM
|
|
|
Enthusiast Joined Mar 4, '03 From Kirkland, Washington Currently Offline Reputation: 0 (0%) |
ha i carry mine in my trunk so i can say im driving to a friends house to have him put it on for me - cuz i can get away with that cuz im a girl! :-D
-------------------- Cruisin down the street in my Infiniti...always lookin for my next trip to Sin City
|
|
Dec 1, 2004 - 2:34 PM
|
|
 Enthusiast Joined Mar 23, '03 From New Orleans Currently Offline Reputation: 5 (100%) |
QUOTE(BlackCelicaGT94 @ Dec 1, 2004 - 2:24 PM) ha i carry mine in my trunk so i can say im driving to a friends house to have him put it on for me - cuz i can get away with that cuz im a girl! :-D [right][snapback]215317[/snapback][/right] thats great |
|
Dec 1, 2004 - 3:33 PM
|
|
 Enthusiast Joined Mar 18, '04 From Portland OR / Vancouver WA Currently Offline Reputation: 0 (0%) |
I thought WA state doesnt require the front plate Natalie?? I dont carry mine w/ me. Then again maybe you are talking about the back plate hmmm
--------------------  |
|
Dec 1, 2004 - 3:42 PM
|
|
 Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
QUOTE(amysmojo @ Dec 1, 2004 - 12:33 PM) I thought WA state doesnt require the front plate Natalie?? I dont carry mine w/ me. Then again maybe you are talking about the back plate hmmm [right][snapback]215362[/snapback][/right] They do...I've been pulled over a few times for those times when I didn't have the front plate on. One time I asked the officer if I could cut the plate to make it fit in the grill, and he said that'd be fine. So it's been cut for a while...cops around here don't care if it's cut it seems, because they never harass me over that. 6GC.net window stickers, on the other hand, are big trouble and could cause severe accidents(according to cops.) 
-------------------- New Toyota project coming soon...
|
|
Dec 1, 2004 - 3:46 PM
|
|
|
Enthusiast Joined Oct 22, '03 Currently Offline Reputation: 0 (0%) |
The itty bitty window stickers? Wow, i better take mine off before i cause a multi car pile up.
They just try and get us for anything.
|
|
Dec 1, 2004 - 3:47 PM
|
|
|
Enthusiast Joined Aug 20, '03 From Annapolis, Md Currently Offline Reputation: 5 (100%) |
I was more talking about the rear plate. I dont have to front one on. I have it in my car, but I havnt used one in Md for over 2 years. never had a problem. I might not cut it anyways, What i was thinking, might just look a lil funny. I was gunna make a retractable arm that would sit right under my rear bumper. but i think even with cutting it, its going to sit to low. I think im just going to mold it into the bumper without cutting, thats guys for the feed-back though.
|
|
Dec 1, 2004 - 3:52 PM
|
|
|
Enthusiast Joined Oct 22, '03 Currently Offline Reputation: 0 (0%) |
I have an idea. What if u use plexi glass for the rear panel and smoke it? Have your plates behind the plexi with some strong light so its visible while the car is on. No? n/m
|
|
Dec 1, 2004 - 5:10 PM
|
|
|
Enthusiast Joined Jul 3, '04 From Yakima, WA Currently Offline Reputation: 1 (100%) |
i so want one so bad
 i'd love to get a 6gc.net sticker, ne one got a picture that i can steal to go to a local vinyl shop?
-------------------- the 1/4 doesnt have patience for a ST.... so we make them ST-T's so atleast we'll sound good going slow.
|
|
Dec 1, 2004 - 5:14 PM
|
|
|
Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
QUOTE(Blakout16 @ Dec 1, 2004 - 2:10 PM) i so want one so bad i'd love to get a 6gc.net sticker, ne one got a picture that i can steal to go to a local vinyl shop?[right][snapback]215431[/snapback][/right] 
-------------------- New Toyota project coming soon...
|
|
Dec 1, 2004 - 5:26 PM
|
|
|
Enthusiast Joined Jul 3, '04 From Yakima, WA Currently Offline Reputation: 1 (100%) |
thanks coomer.
-------------------- the 1/4 doesnt have patience for a ST.... so we make them ST-T's so atleast we'll sound good going slow.
|
|
Dec 1, 2004 - 5:27 PM
|
|
|
Enthusiast Joined Oct 22, '03 Currently Offline Reputation: 0 (0%) |
QUOTE(Blakout16 @ Dec 1, 2004 - 2:26 PM) thanks coomer. [right][snapback]215442[/snapback][/right] Dude, I have a white one if you want it. |
|
Dec 1, 2004 - 7:18 PM
|
|
 Enthusiast Joined Jun 26, '04 From Bay Area, California Currently Offline Reputation: 0 (0%) |
QUOTE(LatinKraze @ Dec 1, 2004 - 3:27 PM) QUOTE(Blakout16 @ Dec 1, 2004 - 2:26 PM) thanks coomer. [right][snapback]215442[/snapback][/right] Dude, I have a white one if you want it. [right][snapback]215443[/snapback][/right]  lemmie get it please? oh man u would b my hero, :lives for the day when he can sport a 6gc sticker on his celi:
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 24th, 2024 - 9:39 AM |