6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> 168bhp uk3S-GE Tuning up to 174bhp, Differences between 1996 and 1997- 3SGE
post Nov 22, 2004 - 5:37 PM
+Quote Post
racingmcfly

Enthusiast
*
Joined Jun 14, '04
From Wimborne Dorset England
Currently Offline

Reputation: 0 (0%)




Hi there, ive just bought a 1997 Celica GT with the 168bhp 2 litre 3SGE engine. I used to have an 1995 MR2 which had the earlier 3SGE engine less the emision control with 174bhp which seemed to be a lot faster than the celica. Does anyone know the diffences between these engines? What can i do to increase the power back to the earlier model. Would an older ECU work?

Can i strip of the emisiion control stuff?
post Nov 22, 2004 - 6:00 PM
+Quote Post
celicaspeed

Enthusiast
**
Joined Aug 22, '04
From kitchener,Ontario
Currently Offline

Reputation: 0 (0%)




In england do you need your egr?If not strip it off and you should take off the cat and resonater and run free flow and that will free up some horse power.Is that a stock engine because I have never heard of that engine in a 6th gen before?
post Nov 22, 2004 - 6:11 PM
+Quote Post
fastgt



Enthusiast
*****
Joined Feb 13, '03
From California
Currently Offline

Reputation: 2 (100%)




yes our 6th gens come with the second and third gen 3sge....beams....ooooohhh nice


--------------------
2011 Spice Orange Mini Cooper
2011 Alpine White BMW E92 M3

gone but not forgotten
2008 Space Grey BMW Z4 ///M
2009 Black Honda Civic LX Coupe
2006 Magnetic Black Nissan 350Z
2007 Crimson Red BMW 335i Coupe
post Nov 22, 2004 - 7:08 PM
+Quote Post
racingmcfly

Enthusiast
*
Joined Jun 14, '04
From Wimborne Dorset England
Currently Offline

Reputation: 0 (0%)




The CAT is a reqirement for the MOT (Ministry of Transport Test) which is performed yearly, so i can strip of the CAT as long as I keep it to put back in once a year. Probably get away without the EGR, gonna have to take a look how it is all connected! Maybe it just needs a good blow out, its been driven gently by a woman for the last year and not really been driven hard at all.
post Nov 23, 2004 - 3:18 PM
+Quote Post
Mr_E



Enthusiast
****
Joined Nov 16, '04
From UK
Currently Offline

Reputation: 0 (0%)




You need the cat for the MOT, yes.

There's not a lot of easy stuff to do with a 3S. It's kicking out 90bhp/litre already, so you're not doing badly.


--------------------
JDM ST205

Blitz Spec NUR Exhaust, somewhere over $1000
Needing another one 18000 miles later, bloody annoying.
post Nov 23, 2004 - 10:36 PM
+Quote Post
lagos



Enthusiast
*****
Joined Aug 31, '02
From Philadelphia, PA
Currently Offline

Reputation: 8 (100%)




even with the same motor inside, the mr2 will probably feel faster because of the rear wheel mid engine design


--------------------
15PSI - 30MPG - Megasquirt Tuned
post Nov 24, 2004 - 1:20 PM
+Quote Post
racingmcfly

Enthusiast
*
Joined Jun 14, '04
From Wimborne Dorset England
Currently Offline

Reputation: 0 (0%)




Ah maybe so, might be just my imagination, from what i could find out though the celica is 100kg lighter than the MR2
post Nov 25, 2004 - 2:44 PM
+Quote Post
Digndoug



Enthusiast
*****
Joined Aug 20, '03
From Annapolis, Md
Currently Offline

Reputation: 5 (100%)




I would def say its the midengine/rearwheel .. My old fiero felt faster then most cars i have driving, but then again it was lighter then all and still had 140hp.
post Dec 5, 2004 - 6:11 PM
+Quote Post
racingmcfly

Enthusiast
*
Joined Jun 14, '04
From Wimborne Dorset England
Currently Offline

Reputation: 0 (0%)




Just had her rolling roaded today. Havn't done any mods yet, standard power is 168bhp, mine was pussing 171bhp. Was happy with that!!!!! Wanna get a de-cat now, and if i can find one a 4-2-1 exhaust header/manifold. Problem is they seem to be a bit rare!!! Anyone know who does em? 3SGE
post Dec 8, 2004 - 6:26 PM
+Quote Post
kevstir



Enthusiast
**
Joined Jul 5, '03
From Scotland , Uk
Currently Offline

Reputation: 0 (0%)




Hi m8 head over to http://www.celica-club.co.uk a send stevenc1603 a pm he's thinking of getting rid of his performance header so he might do a swap plus some cash ..

Power wise get youself a Tune a Car decat pipe and K&N 57i induction kit and u will feel a huge increase in low end tourge biggrin.gif , the decat is the best mod iv done to the car engine wise biggrin.gif

Kev

This post has been edited by kevstir: Dec 8, 2004 - 6:27 PM


--------------------
post Dec 23, 2004 - 12:59 PM
+Quote Post
D4W5

Enthusiast
*
Joined Dec 15, '04
From newcastle england
Currently Offline

Reputation: 0 (0%)




i fancy a 4" slash cut stainless system[£430] manifold-silencer["4],the dudes who do this can take the cat away,they also do mot and will pass mine without puting it back on,so that seems the best way,get to know some paople
post Dec 23, 2004 - 2:27 PM
+Quote Post
kevstir



Enthusiast
**
Joined Jul 5, '03
From Scotland , Uk
Currently Offline

Reputation: 0 (0%)




if that includes the manifold thats a very good price m8 biggrin.gif , personaly i would still want the option to put a cat on, having it all one peace is the best way for power but if you get pulled into one of those roadside emission sites there going to say something about it , if you have a decat in there then you can say you forgot to take it off after a track day, that way they will usualy just give you a 7 day slip to put the cat back on ..

Kev


--------------------
post Dec 24, 2004 - 9:46 AM
+Quote Post
D4W5

Enthusiast
*
Joined Dec 15, '04
From newcastle england
Currently Offline

Reputation: 0 (0%)




good point,i wont get the manifold in the deal,to be safe i might leave the cat,changet the manifold and get a stainless system cat -back,more expensive solution but i'll get about 15 bhp from it!! ??,keep on changin the cat seems alot of faff,may be worth it though ,how much to keep swappin it?
post Dec 24, 2004 - 3:53 PM
+Quote Post
kevstir



Enthusiast
**
Joined Jul 5, '03
From Scotland , Uk
Currently Offline

Reputation: 0 (0%)




cost me £10 to get a kwik fit monkey to swap m8 , thing is if you get the new system you will be able to swap it yourself as its only 4 bolts , the only reason i got kwik fit to do it the first time was because the bolts were far to rusty to get off(been on for 10 years lol) , he burned them out lol, this year i will just change it over myself as the bolts should be ok after 1 year ..

Not dissing 6gc.net in anyway but i recon you would get on better over at http://www.celica-club.co.uk for engine related stuff, the reason i say this as 99% of peeps on here are from the US and they didnt get the 3s-ge , asking about decats here most people tend to say they make no difference , maybe to the 1.8 and the 2.2 they dont but our 3s-ge gets some healthy gains from it biggrin.gif ..

Kev

This post has been edited by kevstir: Dec 24, 2004 - 3:57 PM


--------------------

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 23rd, 2024 - 4:51 PM