Need Help designing, 2 subs 1 amp Options

[94silverst]

Hey, Anyone have some cool ideas for a custom enclosure in our trunks? I was going to work with wood, plexi glass and leather material to upolster over the wood. I'm having a tough time comming up with a design, but I want to do something really trick, with 2 Alpine 12" subs and 1 Amp, also could incorporate one or two neons. So if some one with a cool idea could post it on here it would be a great start to my project! Thanks guys!

[Clipsetuner]

http://img.photobucket.com/albums/v175/Cli...m94silverst.bmp[

so it wegdes in between the too sides, do it in FG, and fold down the back seats and there be a window. you can get all kinds of crazy, the designs and what I am working on are gonna be one of the best.
DTE

[creis]

I'll post a pic of my fiberglass box for my 2 10's, when its done, its molded into the driver side of the trunk, my amp and cap are gana be in my fiberglass trunk cover (hatchback lift cover thing) there suspended/encased so that the only thing you can see of them is the knobs and where the wire's go in/out (and the amp fan has to hole as well.)

[DamDirtyApes]

im thinking of doing one to but im not really sure where to start. but it will end up being painted red

[94silverst]

Thanks for the advice! Keep it comming!!

[DamDirtyApes]

iv heard to shape it using expanding foam can help

[playr158]

ok make a mold of of the trunk......the back of the seats the bottom the sides...

then make 2 12" mdf rings to mount the woofers to, then use dowl rods to hodl teh rings out and angled as desigered.... then glue the rings into place...staple a t-shirt to all the sides and then the rings....resin the t-shirt then fiberglass over that.... cut out the t-shirt inside the rings mount your sub

[Digndoug]

This is what im doing, im not finished.. an i also changed my side panle to a sold molded peace. heres some pics.

[Digndoug]

or try somthing with this,

[C3L1CA]

Just an idea, and yes I know they are sony but I don't care they were a present