Feeler FS: celica intercooler package, making a list of who wants one Options

[nik]

I'm starting to order parts and i just want to know who all wants one.

fill this out

1. FULL PACKAGE yes/no
2. Intercooler piping yes/no
3. powder coat yes/no
a. piping size #(2" 2.25" 2.5")
b. intercooler yes/no if no i need dimesions

4. GT , ST, and 3sgte swap
5. ABS or no ABS
6. where the turbo is sitting and where the filter is going


price
1. $530+ shipping FULL PACKAGE
2. $350+ shipping PIPE KIT+P.C
3. $300+ shipping PIPE KIT


PC=powder coating pm me for color section
ALL KITS COME WITH COUPLERS AND HARD WARE

Piping: ((most of the piping will be welded smoothed and coated))


INTERCOOLER:


Core size: 25 wide X 5.875 tall X 2.75 deep

Overall: 30 from outside of end tank to outside of end tank X 6.5 tall X 3.125 at the thickest

Standard Piping: 2.5 OD X .065 wall X 2 long (2.25" OD available at an extra cost)

There are nine cooling rows and eight fin rows on this intercooler.

The cooling rows on this intercooler are internally finned.

The end tanks have a brushed finish.

The threaded mounting points are steel. There are three inserts in the top and three inserts in the bottom.

This post has been edited by nik: Jan 10, 2005 - 6:17 PM

[doGGy]

Nic, how much only for intercooler? and could you get some pics of it?

[nik]

Nic, how much only for intercooler? and could you get some pics of it?
[right][snapback]230330[/snapback][/right]

PICTURES

doggy i'll PM you a price for just the intercooler

[nik]

ok i have already had a bunch of questions who ever has a question or wants a kit can you please fill out the form like this

EXAMPLE:

fill this out

1. NO
2. YES
3. powder coat YES color__
a. piping size 2.5"
b. bov NO
c. intercooler YES
4. GT
5. NO ABS
6. where the turbo is sitting and where the filter is going

then i will PM you an amount.

[Supersprynt]

Do you want a form filled out for questions like: what kind of piping (metal type), who makes the intercooler, is it bar and plate or tube and fin? What path would you be taking on a 3sgte swap?

[nik]

ANSWERS

this has a few answers

metal 16ga

[nik]

I'm still trying to iron out all the bugs this porject is in the baby steps
for the 3sgte swap piping
7afte : are good to start
5sfte : few weeks out with 3sgte manifold
5sfte : after market manifold good to go

Intercooler manufacture N/A for now i'm only getting 10% off working on better price.

IC piping Metal 16 guage

path on the 3sgte pipe route would be on the driver side for both turbo and manifold

[biglipzit]

Hmmm how much would piping, intercooler and P.C cost?? I think i would rather buy a greddy Type S BOV.

[blackbullet]

how much is it for just the intercooler?...

[nik]

Hmmm how much would piping, intercooler and P.C cost?? I think i would rather buy a greddy Type S BOV.
[right][snapback]230805[/snapback][/right]

if you can it would be best to send me your flange so i can weld it on and powder coat all the piping.

This post has been edited by nik: Jan 10, 2005 - 6:18 PM

[nik]

how much is it for just the intercooler?...
[right][snapback]230960[/snapback][/right]

PM sent

[nik]

bump

[Doge]

Just a few questions Nik. Your plans look great so far. I'm definately interested but would like to know more about the setup before I seriously consider.
What intercooler are you going to use? You say the price range will probably be $450 to $550, correct? Could you possibly Itemize the "full package" and give pricing for all the extras (bov, pouder coat, etc.) You say the 3s-gte fab is still in the works correct? If so I would be willing to come up and let you take measurements if you want. That way I could see your stuff in person and get a better idea. Let me know if you're intrested. Thanks!

Steve

[nik]

Just a few questions Nik.  Your plans look great so far.  I'm definately interested but would like to know more about the setup before I seriously consider. 
What intercooler are you going to use?  You say the price range will probably be $450 to $550, correct?  Could you possibly Itemize the "full package" and give pricing for all the extras (bov, pouder coat, etc.)  You say the 3s-gte fab is still in the works correct?  If so I would be willing to come up and let you take measurements if you want.  That way I could see your stuff in person and get a better idea.  Let me know if you're intrested.  Thanks!

Steve
[right][snapback]235978[/snapback][/right]

ya that would be great if you could come up for some measurements i'll send you a list of how it broke down.

[nik]

bump