7AFTE DYNO RESULTS, video inside Options

[nk_pimpin18]

those are some good a$$ numbers. i wish i had enough money to buy your kit.

[dstrbcelica]

nice vids too.

-dstrb

[initialdrift55]

haha sweet very very nice...you gave me hope and i happened to get lucky and we just finished turbo-ing my friends civic hatch and he had 2 intercoolers so he gave me one of them...so that saved me some money..its a johnnyracecar intercooler....

JohnnyRaceCar

[nik]

haha sweet very very nice...you gave me hope and i happened to get lucky and we just finished turbo-ing my friends civic hatch and he had 2 intercoolers so he gave me one of them...so that saved me some money..its a johnnyracecar intercooler....

JohnnyRaceCar
[right][snapback]243952[/snapback][/right]

yeah i have one of there older ones (intercooler) good stuff

[Mike431635]

Hmm, makes me want to do the 1.8L 20V turbo build in my 5th gen even more

[nik]

Hmm, makes me want to do the 1.8L 20V turbo build in my 5th gen even more
[right][snapback]243997[/snapback][/right]

i though about that a 20v black top swap with a turbo but i think the 7agte would produce some good power ray hall got 300

[Digndoug]

didnt that one guy get around 390hp with the 20v ? i lost the link.

[Nemises]

Luv it! Good Job! If you change the internals it would be hot to see that car a 6 speed

[nik]

Luv it! Good Job! If you change the internals it would be hot to see that car a 6 speed
[right][snapback]244032[/snapback][/right]

7agte with a 6 speed pushing around 300whp that would be nice

[97sccelica]

ok guys i'm starting to gather parts it my take awhile for the 7agte

things i need
4agze head, wiring harness, and ecu
gze pistons 8.0:1
4age manifold intake (bigger throttle body) i think gotta check again
jgstool 4age manifold for turbo ( i might go custom )
t3 t4 turbo
cam gears
radiator after market
rods ( not sure if i'll use stock or go after market )
i think thats most of the main stuff
[right][snapback]243936[/snapback][/right]

if you are going to do that much work, why not get an aftermarket ems?

it has to be easier than dealing with making a hybrid harness.

wiring the SDS system in my friends Z took a day, and it started on the first try. the hardest thing about it was drilling 4 holes in the crank pully for the Hall sensor setup.

[Nemises]

Luv it! Good Job! If you change the internals it would be hot to see that car a 6 speed
[right][snapback]244032[/snapback][/right]

7agte with a 6 speed pushing around 300whp that would be nice
[right][snapback]244036[/snapback][/right]

And I believe an advantage that the GT guys cant do

[StaticKnotX]

Think you could shoot a vid of you under hard acceleration? wouldnt mind seeing how quick your car is with accelerating

[easternpiro1]

the nick listed: for teh 7a

things i need
4agze head, wiring harness, and ecu
gze pistons 8.0:1
4age manifold intake (bigger throttle body) i think gotta check again
jgstool 4age manifold for turbo ( i might go custom )
t3 t4 turbo
cam gears
radiator after market
rods ( not sure if i'll use stock or go after market )
i think thats most of the main stuff

im thinking this would be cheaper than getting a 3sgte...but around how much?

[nik]

Think you could shoot a vid of you under hard acceleration? wouldnt mind seeing how quick your car is with accelerating
[right][snapback]244386[/snapback][/right]

like out on the street yeah i can do that. give me a a few days and i'll have a video up.

[nik]

the nick listed: for teh 7a

things i need
4agze head, wiring harness, and ecu                                                $700
gze pistons 8.0:1                                                                            $200
4age manifold intake (bigger throttle body) i think gotta check again  $75
jgstool 4age manifold for turbo ( i might go custom )                          $250
t3 t4 turbo                                                                                  $300-1000
cam gears                                                                                  $100-400
radiator after market                                                                    $200
rods ( not sure if i'll use stock or go after market )                          $350-700
i think thats most of the main stuff                                  total $2175-3425

im thinking this would be cheaper than getting a 3sgte...but around how much?
[right][snapback]244391[/snapback][/right]

i missed a few parts but 2000-3500 in parts you can get some of this stuff cheaper but then you have labor if you dont do it yourself as for me i'll be doing 90% of the work

[StaticKnotX]

Think you could shoot a vid of you under hard acceleration? wouldnt mind seeing how quick your car is with accelerating
[right][snapback]244386[/snapback][/right]

like out on the street yeah i can do that. give me a a few days and i'll have a video up.
[right][snapback]244392[/snapback][/right]

awesome man, you rock. Could you do it with a somewhat high psi too? wanna see what hard drive looks like Thanks...will help me decide if I wanna turbo the car or save up for a new car

This post has been edited by StaticKnotX: Feb 10, 2005 - 4:10 PM

[nik]

bump for anyone that didnt see it

This post has been edited by nik: Feb 17, 2005 - 11:36 AM

[Irishflame27]

i wanna see the vid!

[Ethnykceli]

i wanna see it too

[nik]

I'm bringing this back to show the number that this kit got beacuse its for sale