Odd clutch noises..., Help? New clutch, making noises... |
Odd clutch noises..., Help? New clutch, making noises... |
Feb 17, 2005 - 4:16 PM |
|
Enthusiast Joined Sep 30, '04 Currently Offline Reputation: 0 (0%) |
Good afternoon, ladies and gentlemen.
I post to ask for your help in deciphering a mystery on my 6th gen celica. Two weeks ago, I had a Centerforce Dual-Friction clutch installed onto my vehicle. I have driven approximately 150 miles on this new clutch and I've noticed an odd noise coming from the clutch. When the vehicle is in neutral (engine idle, stick in neutral, clutch out) there is a whining/scratching noise coming from the clutch. When I depress the clutch (engine idle, stick still in neutral, clutch in) the noise promptly stops. When I release the clutch (engine idle, stick neutral, clutch out) the noise whines up (as if it is spooling up with the clutch) and remains steady. Anybody have any similar experiences with new clutches? Specs: 1996 Celica GT 2.2L Engine 81k miles Centerforce Dual-Friction clutch |
Feb 17, 2005 - 4:18 PM |
|
Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
throw out bearing.
-------------------- Former Team 5SFTE pro member ;)
13.6@108MPH, 5SFTE Powered |
Feb 17, 2005 - 4:18 PM |
|
Enthusiast Joined Sep 30, '04 Currently Offline Reputation: 0 (0%) |
Oh, and here's the link to my previous topic on the clutch install:
http://www.6gc.net/forums/index.php?showtopic=20475 Thanks, Ed |
Feb 17, 2005 - 4:19 PM |
|
Enthusiast Joined Sep 30, '04 Currently Offline Reputation: 0 (0%) |
What about the throw-out bearing?
Anything wrong? Normal? Imminent engine implosion? |
Feb 17, 2005 - 5:29 PM |
|
Enthusiast Joined Nov 16, '04 From UK Currently Offline Reputation: 0 (0%) |
Thrust/Release bearing is not right.
Did they fit a new one when the clutch went in? -------------------- JDM ST205
Blitz Spec NUR Exhaust, somewhere over $1000 Needing another one 18000 miles later, bloody annoying. |
Feb 17, 2005 - 7:44 PM |
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
when you install the bearing there are a few places where you have to apply grease to it and the fork.
if you are lazy, you can turn the clutch pedal height adjuster untill the sound goes away. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Lo-Fi Version | Time is now: December 2nd, 2024 - 7:11 PM |