 Give Away: New Suspension Techniques Sway Bar, California Resident Only |
  |
 Mar 1, 2005 - 6:33 PM
|
 
|
|
Enthusiast  Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%)  |
I have been in contact with Suspension Techniques over the last several weeks. They have redesigned the ST front sway bar for our cars to eliminate the rubbing. They have asked me to find one person close to the Fresno area who would be willing to leave their car with them for two days for test fitting. The person would get a FREE sway bar. PM me if you are interested. Preference will be given to those that are willing to do this soon and those that have been nice to me.
 I will tell you that aside from my 3s (  ), adding these sway bars was the biggest performance difference I have done to my car. The cornering is top notch with these babies.
This post has been edited by jgreening: Mar 1, 2005 - 10:23 PM -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
|
Mar 1, 2005 - 7:02 PM
|
|
 Enthusiast Joined Dec 25, '02 From Pittsburgh/Clairton, PA Currently Offline Reputation: 1 (100%) |
you tease!
--------------------  |
|
Mar 1, 2005 - 7:03 PM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
This deal is like a sore penis - Can't beat it!
-------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
|
Mar 1, 2005 - 8:01 PM
|
|
 Enthusiast Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) |
Just a front bar? Whatabout a pair? I'd prefer to just run a rear bar than just a front... ;] I'll do it for both front and rear... but just one isn't tempting enough.
-------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
|
Mar 1, 2005 - 8:55 PM
|
|
 Enthusiast Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) |
What happens if you have an uninstalled front? Can we get a swap?
-------------------- |
|
Mar 1, 2005 - 9:04 PM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
QUOTE Just a front bar? Whatabout a pair? I'd prefer to just run a rear bar than just a front... ;] I'll do it for both front and rear... but just one isn't tempting enough. Its just a front. You could buy a rear too and have a set for about $100. QUOTE What happens if you have an uninstalled front? Can we get a swap? I would imagine they would swap it out for you super. They are swapping mine out for free. But, I suggest that no one contact them until the fitment issue is resolved. I don't want to scare them away from finishing this project by tons of people calling them. Once, its done and they have given me mine, I think they would be hard pressed not to replace the bar for others. -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
|
Mar 1, 2005 - 9:42 PM
|
|
 Enthusiast Joined Aug 20, '03 From Annapolis, Md Currently Offline Reputation: 5 (100%) |
ROAD TRIP!.... only if i had time..
 but this is good to know.. cause i was thinking around summer getting a set. |
|
Mar 1, 2005 - 10:21 PM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
-------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
|
Mar 1, 2005 - 11:07 PM
|
|
 Enthusiast Joined Jul 21, '04 From Fresno, CA Currently Offline Reputation: 1 (100%) |
Im from Fresno, Cali. are they in Fresno?... but yeah...i dont trust leaving my car at places i dont know... if i take it there and they try it on and bring my car back when they are done with it..its kool with me.. Fresno is not really a good place to leave your car out somewhere or anywhere...but if they're in fresno let me know... ill try to find someone if i can.. i know a couple of guys...
--------------------  |
|
Mar 2, 2005 - 12:49 AM
|
|
|
Enthusiast Joined Aug 19, '04 From Berkeley Currently Offline Reputation: 0 (0%) |
I'll do it!
This post has been edited by soltrain: Mar 2, 2005 - 12:53 AM |
|
Mar 2, 2005 - 1:24 AM
|
|
|
Enthusiast Joined Feb 7, '05 From Fresno, CA Currently Offline Reputation: 0 (0%) |
Fresno represent i live there where is the place located exactly?
|
|
Mar 2, 2005 - 3:12 AM
|
|
|
Enthusiast Joined Aug 16, '03 From Bay area Currently Offline Reputation: 0 (0%) |
shoot, i'm willing to go there..
where is there exact locations? |
|
Mar 2, 2005 - 6:25 PM
|
|
 Enthusiast Joined Jan 17, '03 From Fresno, CA Currently Offline Reputation: 0 (0%) |
I AM DEFENITLY FROM FRESNO TOO.........THEY ARE LOCATED ON THE SOUTHEAST PART OF FRESNO ON CALIFORNIA STREET JUST OUTSIDE DOWNTOWN... I PAST COUPLE TIME THROUGH THERE..JUST GO TO THERE SITE AND THEY WILL TELL U THE DIRECTION........BUT I THINK THEY ONLY MADE THE FRONT AND BACK OR JUST THE SUSPENSION BAR IN THE REAR.......
IT BEEN A LONG TIME COMING OUT SOMETHING NEW FOR OUR CAR. |
|
Mar 2, 2005 - 6:28 PM
|
|
|
Enthusiast Joined Jan 17, '03 From Fresno, CA Currently Offline Reputation: 0 (0%) |
HERE ARE THERE NEW LOCATION
Suspension Techniques, Inc. 1075 North Avenue Sanger, CA 93657 Phone: Tollfree US: 800.595.7016 California and outside US: 559.875.8883 Telefax: 559.875.9883 Internet: http://www.stracing.com |
|
Mar 3, 2005 - 12:12 AM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
Soltrain is getting the free piece guys. Again, for those of you with the old units, I recommend not contacting the company until the piece is finished and they have sent me mine. Once they do, they will have a hard time justifying not replacing it for other folks - particularly those that have purchased it recently. I just don't want to see them bombarded while they are essentially doing a favor for us. So far, they have been great to work with.
This post has been edited by jgreening: Mar 3, 2005 - 3:47 PM -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
|
Mar 3, 2005 - 11:20 AM
|
|
 Enthusiast Joined Sep 28, '03 From Bloomington, IN Currently Offline Reputation: 0 (0%) |
QUOTE(st202gt @ Mar 2, 2005 - 11:25 PM) I AM DEFENITLY FROM FRESNO TOO.........THEY ARE LOCATED ON THE SOUTHEAST PART OF FRESNO ON CALIFORNIA STREET JUST OUTSIDE DOWNTOWN... I PAST COUPLE TIME THROUGH THERE..JUST GO TO THERE SITE AND THEY WILL TELL U THE DIRECTION........BUT I THINK THEY ONLY MADE THE FRONT AND BACK OR JUST THE SUSPENSION BAR IN THE REAR....... IT BEEN A LONG TIME COMING OUT SOMETHING NEW FOR OUR CAR. [right][snapback]252340[/snapback][/right] SIRYOURCAPSLOCK IS ON!!1111EVLEVEN!!! -------------------- NASA/SCCA RX-7....currently under the knife
92 Civic hatch B16 - Sold 10th anniv RX-7 - RIP The Slow Celica - Sold...and then crushed crushed due to street racing. Quote from Seinfeild: George's Boss reading a magazine: "People magazine's most beautiful people. Oh and a Celica...nothin wrong with that!" |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 30th, 2024 - 9:41 PM |