Sunroof Switch?, How to Wire Options

[sapperk]

What a pain in the A$@.. I was working on my head liner, and well im relocating the dome light, mirror, and sunroof switches. What a pain. I bought some chrome window sitches that are going to look sweet on the center console for the sunroof controls. But heres the problem. On the switch is 6 prongs to hook up wires, On the sunroof control switch there are only 5 wires. Trial and error until i get it right. An advice or info feel free to teach me.

[946thGenGT]

What a pain in the A$@..  I was working on my head liner, and well im relocating the dome light, mirror, and sunroof switches.  What a pain.  I bought some chrome window sitches that are going to look sweet on the center console for the sunroof controls.  But heres the problem.  On the switch is 6 prongs to hook up wires,  On the sunroof control switch there are only 5 wires.  Trial and error until i get it right.  An advice or info feel free to teach me.
[right][snapback]280170[/snapback][/right]

Well 5 wires seems to me like one ground wire, one for open, one for close, one for up, one for down (if it's one of those 4-way sunroofs)...

[Coomer]

White/black is ground.
Pink is open.
Green/yellow is close.
Red/white is down.
Red/yellow is up.

Ground signals are sent from the switch to the movement wires, which then connect to the moon roof control relay, which is in the front of the roof.

Here's a link to the wiring diagram for the moon roof.

http://www.6gc.net/misc/moonroof_circuit.gif

[sapperk]

This is really kicking my butt...

[sapperk]

Thanks Coomer, I finally got it. There was no pink wire though, it was gray.

Now once i get the fiberglassing done ill install my new switches in the center console..