T3 Turbo in a 7afe anyone have pics? Options

[slipgun]

I’m just curious what everyone’s exhaust manifold and how they fit the tubing to the intercooler ect was run just to give me a bit better idea how it all fits... If anyone has any I would greatly appreciate it. Thanks!

[vangSTa_celica]

Here's nik's (former) setup.

EDIT: Or, you could just take a look at this

http://www.6gc.net/index.php?action=howto&itu=128

This post has been edited by vangSTa_celica: May 4, 2005 - 4:25 PM

[nik]

thanks vangSTa_celica that saved me a little time

[slipgun]

... Wow... Ok... ive been a member for 2 years and never saw that article... must be new... sorry I dint notice it I feel really stupid now... thanks vangSTa_celica and Nik for making it
The purple part is your blow off valve right? I have an external waste gate... looks like there is just enough room for the flange... but it might connect to the rubber coolant hose and it is probobly too hot for that.. and you cant offset the turbo anymore to the left without covering the window washer liquid hole can ya?

This post has been edited by slipgun: May 4, 2005 - 4:43 PM

[nik]

... Wow... Ok... ive been a member for 2 years and never saw that article... must be new... sorry I dint notice it I feel really stupid now... thanks vangSTa_celica and Nik for making it
The purple part is your blow off valve right? I have an external waste gate... looks like there is just enough room for the flange...  but it might connect to the rubber coolant hose and it is probobly too hot for that.. and you cant offset the turbo anymore to the left without covering the window washer liquid hole can ya?
[right][snapback]282541[/snapback][/right]

i put that up about a year ago or so and yes the purple part is my greddy type S bov you can offset it just depends on where you weld your turbo flange at also you can get or make a custom pipe for the filter so it goes around the washer fliud lid also i just sold my whole kit to Streetracing10psi about a week ago i miss boost but i'll be happy once my 7agte is done

[slipgun]

Aye I know you sold the kit, and I remeber you buying the kit from Zip, just put off my plans to turbo untill now just got the T3 turbo bov and wastegate gona get the manifold and a second engine next.

[nik]

Aye I know you sold the kit, and I remeber you buying the kit from Zip, just put off my plans to turbo untill now just got the T3 turbo bov and wastegate gona get the manifold and a second engine next.
[right][snapback]282560[/snapback][/right]

cool if you have any questions just pm me also i would get a jgstools manifold with there waste gate flange and your set

[slipgun]

I get the feeling im the first one to try the external wastegate on the 7afe... I looked at that site looks nice but 250 for a not fully functional manifold seems steep?

This post has been edited by slipgun: May 4, 2005 - 9:08 PM

[nik]

I get the feeling im the first one to try the external wastegate on the 7afe... I looked at that site looks nice but 250 for a not fully functional manifold seems steep?
[right][snapback]282686[/snapback][/right]

the first no give me a sec and i'll find a link