LED Windshield Nozzles, (Not the same as the other post!) Options

[JoKeRkId613]

I just got some Eurolite Windshield Washer LED nozzles. I put them in the little holes and stuff now I just have to wire it to my side markers. The thing is, the wire wont reach all the way down there. Is there a better way to get to it or what? Does anyone have pictures of exactly how you would do this and using what wires? Thanks!

[playr158]

ground wires attach to the bolts that the hood uses
take the power wires and run into the fuse box where the sidemaker fuse is and wire it there

[JoKeRkId613]

Thanks a lot playr! Why didn't I think of that? Just one question...which one's the sidemarker fuse and how do I wire it up? Thanks!

[red94celicagt]

grab your owner's manual, theres a section in the back that shows exactly which fuses go to what, not quite sure which one is the side marker, but it wll say in there, just tie the wire around one of the fuse prongs, it will pass electricty through that wire whenever the bumper light is on.

[JoKeRkId613]

I wish I had an owner's manual. I'm not the original owner of the car and I don't have the manual. Can someone with a manual please help me out. Thanks.

[playr158]

open the fuse box
look at the cover there is a diagram in there

[Hanyo]

i would only hook up these thing to the car alarm.

cuz they are illegal in california..