pics from weekend. 56K beware, dent done Options

[Valo666]

So i spent about 3 hours in the burning hot sun and 34 degree weather (celcius..remember im a canuk) workin on the celi. I did my s2000 antenna, took my dent out pretty much, and did some minor inteior and engine bay painting.

Before pics..




and After, before painting



http://memimage.cardomain.net/member_image...782_35_full.jpg


and the engine bay, now with painted intake


and yea its not exterior styling but inside painted too...

[Akimbo]

I have a dent very similar to that. What'd you do to get it out?

[Valo666]

pretty much took my trunk plastic, carpet, spare tire, every thing from that side of the car out, then spent about 2 or 3 hours with a hammer and a block of wood and a cut broom handel knocking it out...it came out like that..but now i gotta mold the metal back to the original shape, so thats the plan for saturday before i go to the local show and shine.

oh yea..ur gonna have to take ur atenna out, like the whole assembly to get the wood in..if its on the drivers side.

This post has been edited by Valo666: Jun 27, 2005 - 1:45 PM

[Akimbo]

sounds difficult

[Valo666]

not really..u just gotta du a few taps on a peice of 2x4 and then check what it looks like.

[Batman722]

nice job, looks new

[dustin15brown]

nice job man, hope it comes out good

[celicagurl152003]

he he he looks formiliar good job though, it looks good

[Valo666]

it still needs some roughwork and paint..im gettin a pint of paint this weekend to use in a spray gun. $25 for a pint. So body work will fully be done, bondo, rust work and paint..it will be pretty sick when its done.

and ty christina:P

This post has been edited by Valo666: Jun 27, 2005 - 9:24 PM

[celicagurl152003]

your welcome