Making HowTo for Projector Conversion/Installing, Is it still usefull or not. Options

[Kadett]

Since i finally have the money for it. I am gonna get the JDM Headlights for my car.
But since all the info about converting the Projector for a LHD is scattered around the Exterior Styling Forum. Maybe its usefull for somebody to do a Full Detail How To about the swapping and installing.

Since i am gonna do installing the lights in about 2 weeks (time for the lights to get here and time for the installing) Maybe i will do a complete How to from beginning to end.

But i just want to know if it has still sense. Since most of the guys here already have them (the active poster anyway).
Just want to know everyone opinion about it.

This post has been edited by Kadett: May 6, 2005 - 1:10 PM

[Manta5x]

yeah it would be greatly appreciated by many

[Mike]

i agree

[madmods]

I actually was going to do it, and took detailed pics, but it was so easy to do I didn't post them. For example the high beams are just a direct replacement-thats it. The low beams need to be wired in, and that would be useful for most people. Details on the connector cap needed. Its just 2 wires.

This post has been edited by madmods: May 6, 2005 - 4:17 PM

[Drocay]

madmods, he's talking about making a how to on turning the RHD reflector to LHD, doggy put up instructions on doing it a while back.

[Guest_DJMC_Celica_*]

I'll Fith that motion!

[Kadett]

Gonna have to wait for another week. Cuz by the time they arrive here i am at a LAN party for a full weekend. BTW Could not get the JDM/USDM Side Skirts directly from local toyota dealer. Something about contacting the main parts office in the Netherlands. It just think they didn't try hard enough. But maybe me contact for my projectors can help me out. Keep you guys updated.

[doGGy]

Ehm...

http://www.6gc.net/forums/index.php?showtopic=19182&st=40

Check this out, i already helped one guy Hope this gonna help you too, so if you have time, take pics while converting and then write everything as it suposet to be

Hope it helps

[Kadett]

I just made the how to. Has to be reviewed i guess.
Its real simple if you do it correctly and take your time. Which i didnt and resulted in 1 melted housing (tried oven methode) the other one went fine (with water methode)

But still the How to need to be reviewed first. There are some mis-typings in the how to.

BTW been away from the internet for a while but now back strong !!!!

[d-roCk]

i plan to get some projectors in the future and i would prolly find it very helpful!

[Kadett]

Still not reviewed. But just PM or Mail me for further info. I will help ya out!