 Suspension tecniques sway bars |
  |
 Jul 10, 2005 - 5:17 PM
|
 
|
|
Enthusiast Joined Mar 19, '05 Currently Offline Reputation: 0 (0%)  |
thinking of getting a pair of these. do any of you with them recomend them. is it necesarry to get an adjustable one or will a standard one do. is it only the rear that needs uprating or is it best to do both. are these thicker than the standard ones??? cheers
|
|
Jul 10, 2005 - 5:46 PM
|
|
 Enthusiast  Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) |
I dont know how they are adjusable but they're a good upgrade, def. feel the difference.
-------------------- |
|
Jul 10, 2005 - 5:55 PM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
the back bar is adjustable. I have mine on the softest setting and it is still a substantial improvement over stock.
-------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
|
Jul 10, 2005 - 6:16 PM
|
|
|
Enthusiast Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) |
Oh the 2 holes, that doesnt seem like to much of an adjustment.
-------------------- |
|
Jul 10, 2005 - 7:12 PM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
QUOTE(Supersprynt @ Jul 10, 2005 - 6:16 PM) Oh the 2 holes, that doesnt seem like to much of an adjustment. [right][snapback]310888[/snapback][/right] The holes nearest the ends are for the softer setting. The warning in the instructions scared me about unwanted oversteer on the firm setting so I just went with the soft setting. -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
|
Jul 10, 2005 - 9:51 PM
|
|
|
Enthusiast Joined May 5, '03 From Toronto Currently Offline Reputation: 3 (100%) |
if you get them, make sure you have money set aside for new links, most of the time they need to be replaced.
|
|
Jul 11, 2005 - 11:42 AM
|
|
|
Enthusiast Joined Mar 19, '05 Currently Offline Reputation: 0 (0%) |
sorry what are the links, or do you mean sway bar bushes?
|
|
Jul 11, 2005 - 1:12 PM
|
|
 Enthusiast Joined Feb 16, '04 From San Diego Currently Offline Reputation: 0 (0%) |
When I looked at the images of the sway bars it looked like they had end links on them. This isn't the case?
I had to replace one when I did my springs and it ran 60 from Toyota. Are there non-OE links I can buy? --------------------  |
|
Jul 12, 2005 - 12:46 AM
|
|
|
Enthusiast Joined Jul 27, '04 From phoenix az Currently Offline Reputation: 0 (0%) |
dont they come with end links?
|
|
Jul 12, 2005 - 6:46 AM
|
|
|
Enthusiast Joined Mar 29, '05 From originally from Honolulu, Hawaii Currently Offline Reputation: 0 (0%) |
Are you guys planning on buying the full kit?
-------------------- Happiness is a BELT FED WEAPON!
Peace through SUPERIOR FIRE POWER! PAVELOW LEADS!!!! |
|
Jul 12, 2005 - 9:59 PM
|
|
|
Enthusiast Joined May 5, '03 From Toronto Currently Offline Reputation: 3 (100%) |
QUOTE(trdevelopment @ Jul 11, 2005 - 10:46 PM) dont they come with end links? [right][snapback]311433[/snapback][/right] nope |
|
Jul 13, 2005 - 11:58 AM
|
|
|
Enthusiast Joined Feb 16, '04 From San Diego Currently Offline Reputation: 0 (0%) |
 The little red things hanging off the end aren't end links? -------------------- |
|
Jul 13, 2005 - 4:52 PM
|
|
|
Enthusiast Joined Mar 19, '05 Currently Offline Reputation: 0 (0%) |
yes im thinking of buying the kit of both frount and rear ones
|
|
Jul 17, 2005 - 3:43 PM
|
|
|
Enthusiast Joined Jul 20, '04 From Tampa, FL Currently Offline Reputation: 0 (0%) |
The 5th gen ones don't come with end links. I don't know if the 6th gen ones are different. Do any of you guys know where to buy replacement bushings for these bars? Mine are pretty worn out in the rear and the bar has an uncommon measurement so I can't use whiteline polyurethane.
|
|
Jul 17, 2005 - 4:04 PM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
QUOTE(Mike431635 @ Jul 17, 2005 - 3:43 PM) The 5th gen ones don't come with end links. I don't know if the 6th gen ones are different. Do any of you guys know where to buy replacement bushings for these bars? Mine are pretty worn out in the rear and the bar has an uncommon measurement so I can't use whiteline polyurethane. [right][snapback]313379[/snapback][/right] Do you mean the bushings that come with the bar? If so, you could probably get them from Suspension Techniques. Call and talk to a guy named Roel Garza. He is very good to work with. Their website is www.stracing.com but it appears to be down right now. -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 1:28 AM |